Log in

View Full Version : Whose installed a Wegner front drive?

John510
03-04-2012, 07:10 PM
OK is it just me or were you guys baffled on how to install this thing?

Anyone have a detailed write up about an install? Id like to do this myself but its looking like I may have to pay someone who has done one before.

EDIT: Casey is walking me through the install. Awesome!
ccracin
03-05-2012, 09:06 AM
Call them and ask any questions you may have. They are very helpful. I have not been let down yet. Good luck.
ironworks
03-05-2012, 10:50 AM
Call them and ask any questions you may have. They are very helpful. I have not been let down yet. Good luck.


What he said
tobenk
03-05-2012, 06:55 PM
The instructions are very straight forward and yes Casey will answer any questions u have. One of the best front drive kits i have ever bought. :thumbsup:
34279
John510
03-05-2012, 08:19 PM
The instructions are very straight forward and yes Casey will answer any questions u have. One of the best front drive kits i have ever bought. :thumbsup:
34279

Did your kit instructions have pictures of the parts and which part# they were?That is where it gets confusing. I don't know which bracket is which. Mine did not have pic references. I have a different kit than the one you have pictured.
tobenk
03-06-2012, 07:19 AM
Yes it had a picture of the parts but not which ones they where. I would look on there web site and see which kit u have and look and see what part goes where. They did have the part numbers listed for which part but not with a picture to show which was which part. Give them a call and im sure they can walk u tru it all.
John510
03-06-2012, 07:11 PM
Got it! Only problem is my LS3 throttle body hits the AC compressor. I need a smaller LS2 one.

http://i527.photobucket.com/albums/cc352/JohnS510/9d57ea77.jpg
Ron in SoCal
03-06-2012, 07:25 PM
Way to go John...:thumbsup:
tobenk
03-06-2012, 08:34 PM
Man that black looks good!!! :thumbsup:
John510
03-08-2012, 06:04 PM
Got a call from Casey today. Im going to send this kit back and upgrade to the new two tone kit instead. :thumbsup:
Ron in SoCal
03-08-2012, 07:36 PM
Good news is it goes on faster the second time around....:)
scherp69
03-11-2012, 12:34 PM
Are you getting the diamond cut kit John? Casey did one of the diamond cut ones for me in polished. He wasn't sure how it would turn out as it was designed for black with polished accents but I'm really happy with how it turned out. I talked to Casey a few times while waiting for the kit to be finished....amazing customer service. He actually put the kit together so he could send me some pics of how it looks completed.

I haven't installed mine yet, but here's the pic that John sent of it installed on one of his motors

http://i222.photobucket.com/albums/dd68/scherp69/102_5450.jpg