Anyone know where to get a New TR6060 Transmission?

[69/RS]

I plan to drop in a Blown 427 in my 69 Camaro and looking for a TR6060 to handle at least 950RWHP. Anyone know where I can find a new(Not rebuilt) TR6060 tranny....at a fair price? Thanks in advance

[454SSguy]

I plan to drop in a Blown 427 in my 69 Camaro and looking for a TR6060 to handle at least 950RWHP. Anyone know where I can find a new(Not rebuilt) TR6060 tranny....at a fair price? Thanks in advance

I would assume you could probably pick one up at a dealership. But they are not really designed for that kind of power. You are MUCH better off with a T-56 Magnum or T-56 built by a trans company IMHO.

[69/RS]

I thought about a T56 magnum.
I spoke with my cousin that had a TT Viper with 1100RWHP and he had a stock TR6060. That car was stupid fast and never had a tranny problem..Thats why I considered the TR6060.I would assume you could probably pick one up at a dealership. But they are not really designed for that kind of power. You are MUCH better off with a T-56 Magnum or T-56 built by a trans company IMHO.

[454SSguy]

I was told otherwise. They are syncroed differently (this is the weak point, the way/amount the teeth actually fit together), that also helps with much smoother shifts though. The bellhousing is non divorceable (means it doesn't come off). There's a company who is doing "divorce kits" for them for around $500 I think, can't remember who it is but there's alot of threads about it on ls1 tech. If you are running anything but an LS motor this will be an issue. They also don't have convetional yoke, it's setup for a flange/hub thingy rather than a U-Joint, but this can also be remedied for a $$$. I'm trying to give as much unbiased info as I can. I looked into both sides, T-56 & Tr606, b/c I had an option to buy a 6060 really cheap ~$1200 complete. But in the end the T-56 was the best choice for me. The T-56 Magnum was a better tranny but at x2 the cost I couldn't justify it, with already being over budget and quickly runnin out of funds. Still don't know how I'm gonna do my headwork :_paranoid .

Sorry for the novel, hope this helps.

-Trey

[chicane]

I think this (http://www.keislerauto.com/recent-news/the-all-new-road-a-track-6-speed.html) is what you are looking for... or maybe even this (http://www.rsgear.com/products/transmissions/tremec-t56.aspx)...

Both good choices... both based on 6060 internals.

[out2kayak]

Perhaps give RPM Transmissions a call:

http://www.rpmtransmissions.com/levelvitr6060.html

That's where I purchased mine (with a few mods as well).

:cheers:

[69/RS]

Thank you very much for the novel.
You clarified a couple things. I definitely need to be able to separate the bell hosing from the tranny. I want to use something like a Lakewood Scatter shield or similar. I should probably call Nelson racing and see what they use since all they build is motors with crazy horse power. Its people like you that make these forums worth while from the info you provide. Thanks again. I was told otherwise. They are syncroed differently (this is the weak point, the way/amount the teeth actually fit together), that also helps with much smoother shifts though. The bellhousing is non divorceable (means it doesn't come off). There's a company who is doing "divorce kits" for them for around $500 I think, can't remember who it is but there's alot of threads about it on ls1 tech. If you are running anything but an LS motor this will be an issue. They also don't have convetional yoke, it's setup for a flange/hub thingy rather than a U-Joint, but this can also be remedied for a $$$. I'm trying to give as much unbiased info as I can. I looked into both sides, T-56 & Tr606, b/c I had an option to buy a 6060 really cheap ~$1200 complete. But in the end the T-56 was the best choice for me. The T-56 Magnum was a better tranny but at x2 the cost I couldn't justify it, with already being over budget and quickly runnin out of funds. Still don't know how I'm gonna do my headwork :_paranoid .

Sorry for the novel, hope this helps.

-Trey

[69/RS]

I will give them a call Monday. I should be able to find what I'm looking for between both these guys.ThanksI think this (http://www.keislerauto.com/recent-news/the-all-new-road-a-track-6-speed.html) is what you are looking for... or maybe even this (http://www.rsgear.com/products/transmissions/tremec-t56.aspx)...

Both good choices... both based on 6060 internals.

[69/RS]

I did call these guys. There is only one guy there that deals with the T56's and TR6060's.He's a little difficult to get a hold of. He had a huge ego and told me he was the best tranny guy in the world. He builds all the trannys for Ford racing and a lot for Chevy but the info wasn't on the sight because it was side work or something to that manner. :rolleyes: I just didnt get a good vibe. He was a real sweet talker too. I'm sure they do a good job though. Perhaps give RPM Transmissions a call:

http://www.rpmtransmissions.com/levelvitr6060.html

That's where I purchased mine (with a few mods as well).

:cheers:

[454SSguy]

All I know about RPM trans is they build the Tranzilla, which is the baddest of the bad. I don't know if that's the guy you talked to or not, but he does build some awesome stuff. I think to figure out what you need you need to tell us a little more about what your doing.

If your gonna drive this thing alot on the street - I'd say consider the T-56 Magnum, or getting a divorced bellhousing TR6060 (I'll look up what shop it was that was doing that).

If the car will be seeing street/strip duty, I'd say get a built T-56 or T-56 magnum

If the car will be seeing sub 10 sec passes at the track - maybe you wanna consider a face plated T-56, it won't shift smooth on the street or sound too pretty, but it's almost unbreakable.

Like I said, it depends on what you wanna do.

[chicane]

Uhm, actually... Rockland Standard Gear is who builds the "Transzilla"... NOT RPM. (Your point of contact at Rockland Standard will be George Kreppin.)

If you are after a 'dog ring' gear box... both of the transmissions available from RSG and/or Keisler have that option. The gear sets from Keisler, in my opinion are much better than the welded faceplate design that the RSG Tranzilla utilizes.

However, if your after a standard synchro set up... they are both the same.

The real question is what your final gear ratio will/should be. The fact that any driven OD gear of 0.75 or more, will dictate a huge drop in efficiency. So I would think that a final ratio of around 2.50:1 would be choice.

The first gear final ratio is also important... and it is better to keep that as close to around 8.0:1 to about 10.0:1. So just keep that in mind when selecting the transmission ratios available.

[69/RS]

The car will have remote reservoir double adjustable coil overs so it will be set up for road racing but will be a nasty street car for the most part. I like to over engineer because I don't want problems at a later point in time. I just want to make sure that what ever set up I get, it will be able to handle the power and not blow up weather I'm at the drag strip, road race or mashing on the street.All I know about RPM trans is they build the Tranzilla, which is the baddest of the bad. I don't know if that's the guy you talked to or not, but he does build some awesome stuff. I think to figure out what you need you need to tell us a little more about what your doing.

If your gonna drive this thing alot on the street - I'd say consider the T-56 Magnum, or getting a divorced bellhousing TR6060 (I'll look up what shop it was that was doing that).

If the car will be seeing street/strip duty, I'd say get a built T-56 or T-56 magnum

If the car will be seeing sub 10 sec passes at the track - maybe you wanna consider a face plated T-56, it won't shift smooth on the street or sound too pretty, but it's almost unbreakable.

Like I said, it depends on what you wanna do.

[69/RS]

I will call all 3 shops tomorrow and get some info. I hope to place an order by the end of the week. Thanks for the info on the gear ratio's. I'll inquire about that as well.
Uhm, actually... Rockland Standard Gear is who builds the "Transzilla"... NOT RPM. (Your point of contact at Rockland Standard will be George Kreppin.)

If you are after a 'dog ring' gear box... both of the transmissions available from RSG and/or Keisler have that option. The gear sets from Keisler, in my opinion are much better than the welded faceplate design that the RSG Tranzilla utilizes.

However, if your after a standard synchro set up... they are both the same.

The real question is what your final gear ratio will/should be. The fact that any driven OD gear of 0.75 or more, will dictate a huge drop in efficiency. So I would think that a final ratio of around 2.50:1 would be choice.

The first gear final ratio is also important... and it is better to keep that as close to around 8.0:1 to about 10.0:1. So just keep that in mind when selecting the transmission ratios available.

[orangevert]

I plan to drop in a Blown 427 in my 69 Camaro and looking for a TR6060 to handle at least 950RWHP. Anyone know where I can find a new(Not rebuilt) TR6060 tranny....at a fair price? Thanks in advance

There is a rebuilt one on Denver Craigslist right now, 719-339-2823 I talked to the guy last night and he still has it.

Kirk

[69/RS]

Thanks Kirk,
I found the AD but doesn't say anything about being rebuilt.
I contacted Rockland Standard Gear and looks like I will be following up with these guys. They said 1 to 3 days build time + shipping. I can run a card over the phone.