chr2002ca
02-10-2012, 08:37 AM
SOLD.
Up for sale is a basically new GM HEI Distributor for a big or small block Chevy, GM part number 93440806. It only has 3800 miles on it and has absolutely no signs of wear. It comes with a bronze gear for steel roller cams. I added a MSD HEI ignition unit with an adjustable rev limiter and I also added an adjustable vacuum advance canister, both of which were very useful additions. I loved the protection of the adjustable(dial) rev limiter and the adjustable vacuum advance allowed me to set my initial advance a little higher and dial back the vacuum advance to eliminate some extra lean conditions I was getting under low RPM/high load(going up a hill) conditions.
http://www.69camaroproject.com/SharedImages/ForSale/IMG_2132s.jpg
More details about this distributor, MSD HEI unit, and vacuum advance canister can be found here:
http://www.summitracing.com/parts/NAL-93440806/
http://www.summitracing.com/parts/MSD-83647/
http://www.summitracing.com/parts/PRO-66952C/
Summit’s current price for this setup (3 parts) is a combined total of $324 ($210+$96+18). My price is $190 + shipping. My company gets a great rate with UPS ground so the shipping shouldn’t be too much within the US(determined by your zipcode). Yes, I will ship international and can specify ‘Gift less than $75’ to avoid import fees.
Feel free to PM me if you have any questions.
Thanks,
Chris
Up for sale is a basically new GM HEI Distributor for a big or small block Chevy, GM part number 93440806. It only has 3800 miles on it and has absolutely no signs of wear. It comes with a bronze gear for steel roller cams. I added a MSD HEI ignition unit with an adjustable rev limiter and I also added an adjustable vacuum advance canister, both of which were very useful additions. I loved the protection of the adjustable(dial) rev limiter and the adjustable vacuum advance allowed me to set my initial advance a little higher and dial back the vacuum advance to eliminate some extra lean conditions I was getting under low RPM/high load(going up a hill) conditions.
http://www.69camaroproject.com/SharedImages/ForSale/IMG_2132s.jpg
More details about this distributor, MSD HEI unit, and vacuum advance canister can be found here:
http://www.summitracing.com/parts/NAL-93440806/
http://www.summitracing.com/parts/MSD-83647/
http://www.summitracing.com/parts/PRO-66952C/
Summit’s current price for this setup (3 parts) is a combined total of $324 ($210+$96+18). My price is $190 + shipping. My company gets a great rate with UPS ground so the shipping shouldn’t be too much within the US(determined by your zipcode). Yes, I will ship international and can specify ‘Gift less than $75’ to avoid import fees.
Feel free to PM me if you have any questions.
Thanks,
Chris