PDA

View Full Version : Long list - DSE ARP Flaming River AEM Walbro Prothane and more...


Gandalf
01-23-2012, 12:44 PM
New Year clean-out! All of these parts left over from my '69 Camaro build. Shipping is not included unless specifically stated. No pictures at this time but I have included part numbers where possible. Most parts are new so if you Google that part number you will likely get info and prices. PM fills fast so post here or email direct for a faster response. These parts are listed on other forums also but I will try to update the list as items sell (and payment received!). All parts will ship from 92011. PayPal preferred.


8. Art Morrison A/T crossmember - $35
10. AEM Dry Flow synthetic air filter (P/N# 21-3059DK) - $40
12. Trunk lid latex rubber seal from Classic Industries - $50
14. 30way weatherpack connector complete from EFI Connection. This includes both male and female connectors, shroud, cover, seal and locks - $50 shipped
15. LS7 Dry to wet sump conversion spacer (P/N# SDLS7SPCR) – New. $20 shipped
16. Holley/Walbro GSS346 in-tank fuel pump. New - $50
19. Stainless through-frame fuel connection/bulkhead - $35
20. DSE upper shock mount for Quadralink coil-overs. Fairly sure these are just generic weld-in upper shock mounts for spherical ends so you could use for others. No hardware other than the 2 spacers. New. $15 shipped.
22. Prothane Black Rear MultiLeaf Spring Eye & HD Shackle Bushing Kit (P/N# 7-1050-BL) $50
23. Prothane 67-81 Camaro Body Mount Kit (P/N# 7-139BL) $30
24. Dominator to 4150 adaptor - $10
29. Ball joint. Fits DSE UCA (and possibly others) - $15


Items Sold (paid for and shipped).

1. SOLD!! Flaming River 32” tilt stainless Steering column – paintable. (P/N# FR20006). Fits ‘67-’68 Camaro and a bunch of others. New. Used for mock-up only. Comes with all wiring/parts.
2. SOLD!! ARP Hex Pressure Plate Bolt Kit for LS (P/N# 134-2201).
3. SOLD!! Flaming River billet Joint (P/N# FR1717DD) 1”DD x 3/4”DD. NIB w/hardware.
4. SOLD!! LS7 Dry sump oil pan adaptor kit complete with anodized AN-12 connections, GM seals and hardware. (P/N# 25534412). New.
5. SOLD!! MSD 8.5mm BBC Black Spark Plug Wire set (P/N# 31773) - unopened box.
6. SOLD!! DSE ½ height body mounts (12pcs - no hardware).
7. SOLD!! Varispring set of Coil Springs (P/N# 09-310) 9” springs.
9. SOLD!! GTO (2004 -2006) manual trans pedals (set of 3). Good for LS conversion.
11. SOLD!! ’69 RS inner headlight door chrome - new
13. SOLD!! Competition Engineering Solid Aluminum Body Mounts (P/N# C3027). New in package.
17. SOLD!! DSE Jounce/Rebound bumpers (P/N# 030501).
18. SOLD!! ARP stainless 12pt 3/8” header bolt kit (P/N# 400-1201).
21. SOLD!! 69 Camaro Brake and Clutch pedals for manual transmission. New.
25. SOLD!! First Gen black carpet kit from Classic Industries - brand new, never installed.
26. SOLD!! AMD Aluminum front bumper for '69 Camaro – New in box.
27. SOLD!! 4th Gen center console for 6sp – excellent condition and complete.
28. SOLD!! Ricks stainless dry-sump OIL tank for first gen – brand new with box.
30. SOLD!! Strange Single-Adjustable coilovers from Art Morrison subframe for first-gen (C6 suspension). Approx 13.5" C-C and 9" springs. No markings on springs. Bushing on top and bearing eye on bottom.

syborg tt
01-23-2012, 01:12 PM
14. 30way weatherpack connector complete from EFI Connection. This includes both male and female connectors, shroud, cover, seal and locks - $50 shipped

Any chance you have a picture

Gandalf
01-23-2012, 01:22 PM
14. 30way weatherpack connector complete from EFI Connection. This includes both male and female connectors, shroud, cover, seal and locks - $50 shipped

Any chance you have a picture

Here is a link to the different components with pictures. This one is still in the box from EFI.

http://www.eficonnection.com/eficonnection/ConnectorDetails.aspx?ItemId=761

Hope that helps,
G.

Ron in SoCal
01-23-2012, 01:35 PM
I'll take the header bolts G...:thumbsup:

Gandalf
01-23-2012, 01:36 PM
I'll take the header bolts G...:thumbsup:

They are yours brother :thumbsup:

Devil Dog
01-23-2012, 02:32 PM
PM sent...

6. DSE 1/2 Height Body Mounts.

coolwelder62
01-23-2012, 05:17 PM
I will take a alum.69 camaro bumper.

Z06vette
01-23-2012, 05:47 PM
PM sent on 8,12,13,21,25,27
Scott

cencalc6
01-23-2012, 06:25 PM
I'll take this- ARP Hex Pressure Plate Bolt Kit for LS (P/N# 134-2201) - $15 shipped

Gandalf
01-23-2012, 06:30 PM
I'll take this- ARP Hex Pressure Plate Bolt Kit for LS (P/N# 134-2201) - $15 shipped

It's yours. PP instructions sent via PM.

G.

TexasDvlDog
01-23-2012, 07:43 PM
Consider Item 13 sold (if still available) thanks ... sent you an e-mail

BBPanel
01-23-2012, 07:44 PM
These go over the valve covers or behind and along bottom edge of valve cover?
5. MSD 8.5mm BBC Black Spark Plug Wire set (P/N# 31773) - unopened box. $70 shipped
-Bob

Gandalf
01-23-2012, 07:46 PM
These go over the valve covers or behind and along bottom edge of valve cover?
5. MSD 8.5mm BBC Black Spark Plug Wire set (P/N# 31773) - unopened box. $70 shipped
-Bob

Sorry Bob - I just received payment on those 5mins ago and marked them as sold.

G.

70Nova
01-23-2012, 08:23 PM
email sent

TexasDvlDog
01-23-2012, 08:29 PM
Paypal sent on item 13..thanks!

Gandalf
01-23-2012, 08:41 PM
I'll take this- ARP Hex Pressure Plate Bolt Kit for LS (P/N# 134-2201) - $15 shipped

Sold to you. Thanks for payment.

G.

Gandalf
01-23-2012, 08:42 PM
Paypal sent on item 13..thanks!

Sold to you. Thanks for payment.

G.

NvrDun71
01-23-2012, 09:00 PM
21. 69 Camaro Brake and Clutch pedals for manual transmission. New - $45

PM Sent on item above....

coolwelder62
01-24-2012, 05:21 AM
Gregg,The bumper is paid for thanks.:thumbsup:

elitecustombody
01-24-2012, 07:52 AM
20. DSE upper shock mount for Quadralink coil-overs. Fairly sure these are just generic weld-in upper shock mounts for spherical ends so you could use for others. No hardware other than the 2 spacers. New. $15 shipped.

G, have a link to a pic?

Gandalf
01-24-2012, 08:47 AM
Gregg,The bumper is paid for thanks.:thumbsup:

Payment received - Sold to you Scott. Thanks.

G.

Gandalf
01-24-2012, 08:50 AM
20. DSE upper shock mount for Quadralink coil-overs. Fairly sure these are just generic weld-in upper shock mounts for spherical ends so you could use for others. No hardware other than the 2 spacers. New. $15 shipped.

G, have a link to a pic?


Here you go:
http://www.rickscamaros.com/camaro-rear-shock-absorber-upper-mount-set-detroit-speed-and-engineering-dse-1967-1969.html

This minus the nut and bolt (x2) but I'm pretty sure I have those somewhere. I'm selling without the hardware but you may get a surprise in the package if I find them before I ship :-)

G.

Gandalf
01-25-2012, 10:52 AM
List updated.

Have replied to all Posts, PM's and Emails to date.
Thanks to everyone who has purchased. I'm enjoying hearing about your projects and how you intend to put these parts to good use!

G.

Gandalf
01-26-2012, 10:28 AM
All purchases shipped and tracking#'s sent.

G.

Boss252
01-26-2012, 03:43 PM
Pm sent on coil springs

Beach Cruiser
01-27-2012, 01:48 PM
Interested in the weather pak, do you have the lugs that crimp on the wires too? ie, everything to go through the firewall?

Gandalf
01-27-2012, 01:58 PM
Interested in the weather pak, do you have the lugs that crimp on the wires too? ie, everything to go through the firewall?

No. I was just going to get those locally once I determined my layout. Those parts do not cost very much at all - about the same retail as from the source of the pak.

G.

TexasDvlDog
01-28-2012, 11:19 AM
Consider Item 13 sold (if still available) thanks ... sent you an e-mail

Got em in the mail today...thanks!!:thumbsup:

Gandalf
02-20-2012, 06:04 PM
List updated - thanks guys!

G.