Route 66 Motorsports 1959 Corvette!

[RT66MOTORSPORTS]

Our Customer's 1959 Corvette Is Equipped With An LS3 Motor, 4L65E Transmission, Custom Built SRIII Chassis With C5 Suspension, Drilled & Slotted Rotors, 4 Piston Calipers, & 18x9 On 275/35/18 & 18x8 On 245/35/18.

This 1959 Corvette Also Features The Following Top Manufacturers:

- IDIDIT Steering Columns
- Auto City Glass
- PPG
- Cool-It Thermo Tec
- Vintage Air
- Billet Specialties

Route 66 Is Also A Dealer For All Parts Used On This Vehicle. If You Like What You See & Want It On Your Own Ride, Call Us Today (815) 462.0090 To Talk To One Of Our Sales Representatives To Help Make That Happen. We Sell Nothing But The Best, At The Best Prices. We Wouldn't Sell It To You Unless We Would Use It On Our Own Builds.

http://rt66motorsports.com/graphics/projects/1959_Corvette/1_large.jpg

http://rt66motorsports.com/graphics/projects/1959_Corvette/2_large.jpg

http://rt66motorsports.com/graphics/projects/1959_Corvette/3_large.jpg

http://rt66motorsports.com/graphics/projects/1959_Corvette/6_large.jpg

http://rt66motorsports.com/graphics/projects/1959_Corvette/13_large.jpg

http://rt66motorsports.com/graphics/projects/1959_Corvette/14_large.jpg

http://rt66motorsports.com/graphics/projects/1959_Corvette/15_large.jpg

http://rt66motorsports.com/graphics/projects/1959_Corvette/16_large.jpg

[coolwelder62]

:thumbsup: :thumbsup:

[Autokraft]

We built one of these with an LS3 as well. Awesome car can't wait to see the progress :thumbsup:

[waynieZ]

Sweet project, I'm going to enjoy watching this.

[daemon2]

Can't wait to see more!:)

[RT66MOTORSPORTS]

http://rt66motorsports.com/graphics/projects/1959_Corvette/17_large.jpg

http://rt66motorsports.com/graphics/projects/1959_Corvette/18_large.jpg

http://rt66motorsports.com/graphics/projects/1959_Corvette/19_large.jpg

[customshop1]

hello Bill We are building a 62 right now with a SR3 chassis. 598 cu n. motor.
should be badd &%% good luck on your project I will have to keep in touch.

[RT66MOTORSPORTS]

A few more progress pics of the '59 Corvette. We have been busy on the body work for this one, and plan on debuting this at Goodguys Columbus.

http://i602.photobucket.com/albums/tt107/rt66products/1959%20Corvette/sr3.png

http://i602.photobucket.com/albums/tt107/rt66products/1959%20Corvette/untitled.png

http://i602.photobucket.com/albums/tt107/rt66products/1959%20Corvette/sr3-1.png

http://i602.photobucket.com/albums/tt107/rt66products/1959%20Corvette/sr3chassis.png

http://i602.photobucket.com/albums/tt107/rt66products/1959%20Corvette/corvette.png

[Thomo5150]

Luv Mike's chassis, this will be a nice vette indeed.............

[GregWeld]

Nice looking chassis -- but I have to ask -- why not use the SRIII chassis which can't be very far from you??

[Thomo5150]

Looks like a SRIII chassis, says a custom SRIII chassis in the OP's opining post....

[GregWeld]

Looks like a SRIII chassis, says a custom SRIII chassis in the OP's opining post....

You're so right -- I missed that because I didn't go back to the beginning.

[Thomo5150]

Sorry I should have said SRIII in my post instead of Mike, Mike Stockdale built my torque tube for my project, true gentlemen to deal with.........

[RT66MOTORSPORTS]

We will agree, Mike at SRIII is a stand-up guy! Builds a very nice chassis as well.

We saw three Corvettes go through Barrett Jackson with the SRII chassis under them.

[Romulus]

I'm doing a '60 on Mike's chassis.

Looks like a great project and moving ahead at full speed.

Bet you guys are done before me. :rofl:

[RT66MOTORSPORTS]

We are planning to have the car at Goodguys in Columbus.