1972 Camaro

[coolwelder62]

I would like to sell my latest Camaro project.It started out as a almost rust free shell.It has 1 of my sub frame's.That uses GM C-6 corvette componets.Ride SA coil over's,splined sway bar.DSE rack & pinion,Wilwood W6A brakes(frt.) W4A brakes(rear).2006 GTO LS2&T56,Speartech wiring,Forgeline ZX3's 18x11's frt.18x12's rear.BFG's 295/30/18frt.335/30/18's rear,moser 9" housing,31spline axles'strange 3:73 posi,My 4-link w/Johnny joint's & poly bushed ends,ridetech SA coil over,Rick stainless EFI fuel tank,C&R alun.Rad w/ZO6 ele. fans,Vintage A/C,Scat seat's,impact harness's,DSE minitubs,wiper motor,body bushings,rol cage,Custom Lower Dash panel,RingBros hinge's,All glass is brand new.The Orange paint is the same color as DSE built DaleJr.72 Camaro.At the 2011 RTTh's W/Kevin driving the car it was 7th fastest out of 83 car's.It drive's very nice now that I upgraded to the RideTech coil over's.It has a few small paint chip's in it now we have been driving it.But I can have those fix if needed.Looking For 75K.Please PM me or Email,Or call the shop 1-785-594-7481,or eves.1-785-594-3299.Thank's Scott Mock. http://www.lateral-g.net/forums/showthread.php4?t=28883

[camcojb]

great car Scott. Good luck with the sale.

http://www.camcojb.com/Scott.jpg

[tones2SS]

That is a really nice car. I wish I had the cash.
GLWS

[coolwelder62]

Thank's Jody.:thumbsup:

[coolwelder62]

I also have a brand new set of OER split bumpers that I could install if someone like that look better.I might look at trades that involve a ZO6 corvette.Thanks Scott.

[LSXIDOC]

Very Nice!!

[GregWeld]

Does it have a motor and transmission in it?

See you left that out of the "Ad".....:D

[HRBS]

I would like to sell my latest Camaro project.It started out as a almost rust free shell.It has 1 of my sub frame's.That uses GM C-6 corvette componets.Ride SA coil over's,splined sway bar.DSE rack & pinion,Wilwood W6A brakes(frt.) W4A brakes(rear).2006 GTO LS2&T56,Speartech wiring,Forgeline ZX3's 18x11's frt.18x12's rear.BFG's 295/30/18frt.335/30/18's rear,moser 9" housing,31spline axles'strange 3:73 posi,My 4-link w/Johnny joint's & poly bushed ends,ridetech SA coil over,Rick stainless EFI fuel tank,C&R alun.Rad w/ZO6 ele. fans,Vintage A/C,Scat seat's,impact harness's,DSE minitubs,wiper motor,body bushings,rol cage,Custom Lower Dash panel,RingBros hinge's,All glass is brand new.The Orange paint is the same color as DSE built DaleJr.72 Camaro.At the 2011 RTTh's W/Kevin driving the car it was 7th fastest out of 83 car's.It drive's very nice now that I upgraded to the RideTech coil over's.It has a few small paint chip's in it now we have been driving it.But I can have those fix if needed.Looking For 75K.Please PM me or Email,Or call the shop 1-785-594-7481,or eves.1-785-594-3299.Thank's Scott Mock. http://www.lateral-g.net/forums/showthread.php4?t=28883

Does it have a motor and transmission in it?

See you left that out of the "Ad".....:D

Greg..... aging eyes are a bitch ! LOL
Scott.... nice car... good luck with the sale !

[syborg tt]

Okay here is my crack at the add just for you Greg,

1972 Camaro
You won't find a nicer car for the money. Built by Chubby's Fabrication and proven on the street and track.

http://garagescene.net/gallery3/var/resizes/Builders/Chubby%27s-Performance-Fabrication/72-Camaro/72%20Camaro%20%2881%29.jpg

http://garagescene.net/gallery3/var/resizes/Builders/Chubby%27s-Performance-Fabrication/72-Camaro/72%20Camaro%20%2882%29.jpg

http://garagescene.net/gallery3/var/resizes/Builders/Chubby%27s-Performance-Fabrication/72-Camaro/72%20Camaro%20%2883%29.jpg

http://garagescene.net/gallery3/var/resizes/Builders/Chubby%27s-Performance-Fabrication/72-Camaro/72%20Camaro%20%2884%29.jpg

http://garagescene.net/gallery3/var/resizes/Builders/Chubby%27s-Performance-Fabrication/72-Camaro/72%20Camaro%20%2885%29.jpg


Build Pictures
http://garagescene.net/gallery3/index.php/Builders/Chubby-s-Performance-Fabrication/72-Camaro

Build Thread
http://www.lateral-g.net/forums/showthread.php4?t=28883


Paint & Body
Project started with an near rust free shell.
Paint Color is the smae Orange Dale Jr. 72 Camaro
DSE Minitubs
DSE Wiper Motor
DSE Body Bushings
Ring Brother Hinges
All glass is brand new.

Engine & Trans
2006 GTO LS2
T56 Manual Transmission

Engine Management
Speartech wiring

Fuel Delivery
Rick stainless EFI fuel tank
Fuel Fill on Drivers Side Rear Quarter ( for looks only )


Cooling
C&R Aluminum Radiator with / ZO6 Eletric Fans

Front Subframe
Scott Mock built Rectangular SubFrame
GM C-6 corvette componets.
RideTech Single Adjust abley Coil Overs
Spline Sway Bar.
DSE rack & pinion,
Wilwood W6A brakes(frt.) W4A brakes(rear).

Rear Suspension
Scott Mock 4-link w/Johnny joint's & poly bushed ends
RideTech Single Adjustable Coil over
Moser 9" housing
31spline axles'
Strange 3:73 posi,


Wheels & Tires
Forgeline ZX3's
Front: 18x11's with BFG's KDW2 Size: 295 30 18
Rear: 18x12's with BFG KDW2 Size: 335 30 18

Interior:
Vintage Air A/C
Scat seat's
Impact Harness's
Custom Lower Dash panel similare Dale Jr's Car
DSE Roll Cage

Subframe Build Pictures
http://garagescene.net/gallery3/index.php/Builders/Chubby-s-Performance-Fabrication

http://garagescene.net/gallery3/var/resizes/Builders/Chubby%27s-Performance-Fabrication/2nd-Gen-Subframe/2nd%20Gen%20Subframe%20%2807%29.JPG


Accomplishments

At the 2011 Run through the Hills with Kevin driving the car ( oh ya Kevin's a really really good driver ) it was 7th fastest out of 83 car's. It drive's very nice now that I upgraded to the RideTech coil over's. It has a few small paint chip's in it now we have been driving it. But I can have those fix if needed.

Price: 75K.
Please PM me or Email,
Phone:
Day 785-594-7481
Evening: 785-594-3299.

Thank's Scott Mock.



4-Sale add updated by Marty for Greg since I know he want's to add this car into his collection. I will also pay for a set of cheater glasses if he needs them.

[coolwelder62]

Marty,how much is the bill for awesome wright up.:thumbsup: Thank's Bud.After seeing your Wright up I think I priced the car way to cheap.:lol:

[coolwelder62]

Greg..... aging eyes are a bitch ! LOL
Scott.... nice car... good luck with the sale !thank's bud,But Please don't pick on Greg.I want him to like me.:D

[coolwelder62]

Marty,The fuel filler is just on the quarter panel for look's.I did not have it in me to cut on a brand new $1,200.00 fuel tank so it fill's from behind the tag.This way is really better because it didn't use up any trunk space.

[GregWeld]

That's professional grade advertising right there!

:D

[coolwelder62]

That's professional grade advertising right there!

:DWell,you know nuting but da best fur me.:lol:

[syborg tt]

Marty,how much is the bill for awesome wright up.:thumbsup: Thank's Bud.After seeing your Wright up I think I priced the car way to cheap.:lol:

Your Welcome

How about a Chocolate Shake the next time we see each other. If one of them are available I'll settle for a Pork Chop Sandwich.

[syborg tt]

That's professional grade advertising right there!

:D

I do my best - I may even try to make it a little better.

[millertime179]

scott had a couple pms about the rear seat shelf and trunk. so here are a few pics.

[Neil B]

Love it! Your build style is spot-on. Just the right amount of race-inspired goodness.

[coolwelder62]

Love it! Your build style is spot-on. Just the right amount of race-inspired goodness.Thank's,I glad someone else like what I am doing.:thumbsup:

[linzbach]

I think there are a lot of us who like what you're doing, Scott! You're a great guy and you build great cars. I've followed this one every step of the way, GLWS!

[Beegs]

Thank's,I glad someone else like what I am doing.:thumbsup:

I LOVE what you are doing!! Modern day moonshine runner...:bow:

[coolwelder62]

I think there are a lot of us who like what you're doing, Scott! You're a great guy and you build great cars. I've followed this one every step of the way, GLWS!Thank's Bill,I wish Orange was your color.:D :thumbsup:

[coolwelder62]

I LOVE what you are doing!! Modern day moonshine runner...:bow:Thank's Brayn,:thumbsup:

[coolwelder62]

I have a back seat that could be redone to match the frt.seat's & install if someone was looking that way.:thumbsup:

[coolwelder62]

Call for Christmas Pricing special.:D

[daytonayellaz]

Thank's Bill,I wish Orange was your color.:D :thumbsup:

I like orange!! Seeing all the really nice second gens out there these days really gets me pumped to get my 70 camaro done. I love the carb butterflies in the dash. I also like the addition of the RS marker lights in the front. The race inspired fuel quick fuel fill in the quarter panel. All really cool touches. Are the little holes in the lower front valance passenger side for cool induction air? These cars seem to be coming on like wild fire over the past couple years! You shouldnt have any trouble selling this one :cheers:

[coolwelder62]

I like orange!! Seeing all the really nice second gens out there these days really gets me pumped to get my 70 camaro done. I love the carb butterflies in the dash. I also like the addition of the RS marker lights in the front. The race inspired fuel quick fuel fill in the quarter panel. All really cool touches. Are the little holes in the lower front valance passenger side for cool induction air? These cars seem to be coming on like wild fire over the past couple years! You shouldnt have any trouble selling this one :cheers:Thank's for the kind word's.:thumbsup:

[coolwelder62]

I may just keep this thing.

[radrambler]

http://i907.photobucket.com/albums/ac278/kustomcarguy/scottscarfikse.jpg
http://i907.photobucket.com/albums/ac278/kustomcarguy/scottscarfikse4.jpg
http://i907.photobucket.com/albums/ac278/kustomcarguy/scottscarfikse3.jpg

:wow:

Tom

[Bucketlist2012]

I may just keep this thing.

My .02 cents is that you keep it....

But i am partial to Killer second gens...And yours is Killer...

[Tom.A]

I think the Fikse's look good on there. I like the Forgelines also but the polished hoop seems to work better with the color imo :thumbsup:

[coolwelder62]

My .02 cents is that you keep it....

But i am partial to Killer second gens...And yours is Killer...Well,you may be right.Everything is always forsale at the right price.:thumbsup:

I think the Fikse's look good on there. I like the Forgelines also but the polished hoop seems to work better with the color imo :thumbsup:The photo's are crap.It look's way better in person.And now that I put the split bumper's on it look's just like DSE built the car.So that should drive the sale price up.:lol:

[coolwelder62]

The camaro is no longer for sale.

[ma73z]

Sold or you keeping it? I know I would'nt sell it if it were mine.

:cheers: Matt

[intocarss]

The camaro is no longer for sale. I hope you kept it

[coolwelder62]

Keeping until I get better offer's.It will be going into storage for the winter.And then maybe a time capsule.:D

[tellyv]

It's a bad time to sell cars right now! I'm with ya on the time capsule.

[coolwelder62]

It a bad time to sell cars right now! I'm with ya on the time capsule.Don't need to sell.Just want to build the car that will win optima for the next 3 or 4 years.:rofl:

[tellyv]

Don't need to sell.Just want to build the car that will win optima for the next 3 or 4 years.:rofl:

Whats optima? I never heard of such a thing!

[Flash68]

Don't need to sell.Just want to build the car that will win optima for the next 3 or 4 years.:rofl:

Will it have windows? A parachute perhaps? :D

[coolwelder62]

Whats optima? I never heard of such a thing!Optima is a small get togather North of Las Vegas, Where guys like me and you try and run as fast as somebody like the Great Mark S.:lol:

[coolwelder62]

Will it have windows? A parachute perhaps? :DI think all I need is a good ZO6 and aleast 7 week's to build it.Then let Kevin drive it Flat Out.:D :thumbsup:

[Bucketlist2012]

I may not win one of these events, but I know I will have the time of my Life trying...:cheers:

[Van B]

Optima is a small get togather North of Las Vegas, Where guys like me and you try and run as fast as somebody like the Great Mark S.:lol:

Scott,

I am not sure if you caught his joke or not. Check Telly's build thread on the T/A if you are not familiar with him. He's been...and had a hell of an experience start to finish.

[coolwelder62]

Scott,

I am not sure if you caught his joke or not. Check Telly's build thread on the T/A if you are not familiar with him. He's been...and had a hell of an experience start to finish.Yea,I know that.That was me screwing around.:rofl: :rofl:

[tellyv]

Who's this Mark S. guy? I never heard of him either.

[coolwelder62]

Who's this Mark S. guy? I never heard of him either.That was the guy over near the Tech tent selling HotDog's.:rofl:

[coolwelder62]

Well I have had a few email's asking my bottom dollar.So here is what I will do.I will keep the fikse's & PS2's and the wilwood brake's.I will put on a new set of C-6 Z-51 brake's and a set of Rushforth's 18x9's & 18x10's and drop the price to 65K.I will post some photo's of the brakes and wheel's tomorrow.At this price it is just about what I have invested.Thank's Scott.

[syborg tt]

Well I have had a few email's asking my bottom dollar.So here is what I will do.I will keep the fikse's & PS2's and the wilwood brake's.I will put on a new set of C-6 Z-51 brake's and a set of Rushforth's 18x9's & 18x10's and drop the price to 65K.I will post some photo's of the brakes and wheel's tomorrow.At this price it is just about what I have invested.Thank's Scott.

Wow that is an incredible price !!!

Trust me you couldn't build this car for that much money

[millertime179]

WOW somebody is going to get a steal! This is a very nice well built car. not sure if anyone mentioned it or not but the LS2 and T56 is very low mileage, practically brand new. Great car and great price! :thumbsup:

kevin miller

[radrambler]

http://i907.photobucket.com/albums/ac278/kustomcarguy/100_0477.jpg

http://i907.photobucket.com/albums/ac278/kustomcarguy/100_0463.jpg

:thumbsup:

Tom

[skatinjay27]

boing!:D

[tones2SS]

That car looks great!:thumbsup:

[coolwelder62]

thumbsup:May give Ebay a try.

[monza]

What's the rwhp?
Is it a stock GTO LS2?

[coolwelder62]

What's the rwhp?
Is it a stock GTO LS2?Stock GTO LS2 w/atune.It had 3300 miles on it when it came from Pick-a-part.My sunoco 69 had the same motor set up and it Dyno'd at 377 RWHP.Run's great but I guess you always want more POWER.:thumbsup:

[monza]

Ya, I was going to buy it but it doesn't have a stereo.:_paranoid

Sweet car, great price I would think it should move, good luck with the sale.

[coolwelder62]

Ya, I was going to buy it but it doesn't have a stereo.:_paranoid

Sweet car, great price I would think it should move, good luck with the sale.Speaker's and wiring are in just waiting on the stereo guy to finish it up.Custom auto sound W/6 disc CD changer.does not have Nav.system but the car does come with NeuRelic's power window kit.Modo inovation's power door lock kit.(just needs installed).

[coolwelder62]

Update,The 72 Camaro sold today.What to do next.:cheers: :cheers:

[Flash68]

Update,The 72 Camaro sold today.What to do next.:cheers: :cheers:

:cheers: Congrats! To a Lat G member? Will we ever see it again?

Do a Pantera next. :unibrow:

[Track Junky]

Update,The 72 Camaro sold today.What to do next.:cheers: :cheers:

:cheers: :woot: :cheers: :woot:
Awesome Scott!!

[skatinjay27]

do a bubble top since gregs over his. haha or my fave 64-65 t-bird.

[coolwelder62]

do a bubble top since gregs over his. haha or my fave 64-65 t-bird.I have bought all the dynacorn parts to build a 69 camaro from scratch.

[itsals1]

What a 69' :_paranoid Don't you know 67' is the new 69' :rofl: :rofl:

Travis

[coolwelder62]

What a 69' :_paranoid Don't you know 67' is the new 69' :rofl: :rofl:

TravisA 69 is wider so I can put the same size tire on the frt. thats on the rear.:willy:

[Tom.A]

That is great news. Did you ever start on that chevelle you had?

[Rick D]

:cheers: :cheers:
Cool Scott, I thought you were going to build a an AMC?? I remember seeing a rendering somewhere in a mag?

[linzbach]

Congrats Scott! Someone just got a killer car. :cheers:

[coolwelder62]

That is great news. Did you ever start on that chevelle you had?Tom,I had a chance to sell the chevelle and make some quick cash.

:cheers: :cheers:
Cool Scott, I thought you were going to build a an AMC?? I remember seeing a rendering somewhere in a mag?I still have the AMC,But I am thinking of doing a 69 camaro because I have redsigned my sub frame's.

[cencalc6]

Congrats Scott! :cheers:

[DIYathome]

Did you fabricate the lower dash piece or get it somewhere?

[coolwelder62]

Did you fabricate the lower dash piece or get it somewhere?I sent you a pm.