This doesnt do alot of guys on here any good, but take a look at my suspension kits.

[Iamtheonlyreal1]

I know it doesnt do anyone on here any good, but I wanted to show you my new company's (Swedish Ops) crossmember suspension kits for the Volvo P1800's and Amazon's. Direct Bolt in, and works with the original motor, along with other engine options like the General Motors Ls Series engines.



We are not done with the cropping, and logo placements, but here are a few updated pictures of the Swedish Ops Crossmember/Suspension Kits.. I had a photographer come in and takes some pics a week or so ago, and here are some of preliminary pics.. As you can see there are alot of color and texture combinations, braking options, rack and pinion options, along with coil over options.. These are how the kits are shipped out, fully assembled and coated..





14 Wilwood Rotor with 6 Piston Calipers





http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1191.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1175.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1181.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1215.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1230.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1220.jpg





Wilood 12.19 inch Rotors and 4 Piston Calipers with Power Rack and Pinion







http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1273.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1241.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1245.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1250.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1284.jpg

[Iamtheonlyreal1]

11 inch Drilled/Slotted rotor and our standard base calipers.







http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1339.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1336.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1348.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1367.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1366.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1364.jpg




Our Bask kit with standard 11 inch Rotors and Standard Calipers.







http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1311.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1302.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1306.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1316.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1321.jpg







Over all shot of the kits with the several brake options







http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1393.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1385.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1404.jpg



http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/suspension/IMG_1416.jpg

[214Chevy]

Robert, as you've stated, I don't have a Volvo, but that is some fine craftsmenship you've engineered there. Much success in the future and good luck on your company. :cheers:

[Iamtheonlyreal1]

Volvo is the New Cool.... Just wait.. LOL




http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/Amazon/1amazon2.jpg

http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/Amazon/1amazon3.jpg

http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/Amazon/1amazon.jpg

[coolwelder62]

Very nice looking pcs.you should talk to Darren at Ride Tech about using their Monotube coil overs.Much better ride qualtiy than QA1's or Strange.You will be very happy with Ride Tech's coilover's.Keep up the great work.:thumbsup: :thumbsup: Scott M.

[Sieg]

Nice work Robert............from an old ex-Volvo guy. I went from a 66 GTO to this in the late 70's: (flame suit on)
http://sieg.smugmug.com/Other/Cycles-Cars/File0016/182692401_xvZXE-M.jpg

[out2kayak]

Wow, looks great! :thumbsup:

:cheers:

[Iamtheonlyreal1]

can you post some more pics? from different angles? how about a few shoots taken from helicopter from overhead....

Ha Ha, I think....

[jvike]

Looks cool! Will it work with the Volvo 142?

[protour73]

Robert, How about pics of those pretty setups on a car? How does it handle with the setup on the car? How much of a difference does it make over stock?

[Iamtheonlyreal1]

Here are some pics of different views of the P1800/Amazon front and rear kits together.. Keep in mind, this is our base kit with base brakes, but this what you see is the minimum of what you get... All the front end kits come fully assembled and ready to install, no welding, no cutting, so once you have your factory components removed, it literally slide right in and matches up with all the existing Volvo bolt holes.. You can also see the front end kit actually has longer braces forward of the OEM. And we do this, because after you remove the factor steering components, the extra reienforced holes are there to utilize for extra support and bracing of the new front crossmember.

http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/Rear%20Axle%20and%20Suspension/001-2.jpg

http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/Rear%20Axle%20and%20Suspension/011-2.jpg

http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/Rear%20Axle%20and%20Suspension/012-2.jpg

http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/Rear%20Axle%20and%20Suspension/013-2.jpg

http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/Rear%20Axle%20and%20Suspension/008-2.jpg

http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/Rear%20Axle%20and%20Suspension/010-2.jpg

http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/Rear%20Axle%20and%20Suspension/015-2.jpg

http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/Rear%20Axle%20and%20Suspension/017-3.jpg

http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/Rear%20Axle%20and%20Suspension/007-2.jpg

http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/Rear%20Axle%20and%20Suspension/005-2.jpg

http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/Rear%20Axle%20and%20Suspension/018-3.jpg

http://i290.photobucket.com/albums/ll255/Iamtheonlyreal1/Rear%20Axle%20and%20Suspension/020-3.jpg

[Iamtheonlyreal1]

I am having Speedway Engineering build our Swedish Ops rear ends.. They are a Ford mod-light 9inch with quick change axles and aluminum hubs..