67greengt
11-12-2011, 01:42 PM
Have a set of Ridetech Master Series front and rear shockwaves upgraded with Internal Ride Height Sensors. These have only been used to mock up the car's ride height.
Rear Shockwave 7000 Master Series Pair with external Sleeves to protect from heat
Part number# 2115071 single adjustable
upgraded to Internal Ride Height Sensors
Compressed: 11.5"
Extended: 16.5"
Ride Height: 14.5"
Stroke: 5
Mount: Bearing
Retail is $900 plus I paid 400 per bag to have the internal sensors put in
Looking for $1200
Front Shockwave 1000 Master Series Pair
Part number # 21240101 double adjustable
upgraded to Internal Ride Height Sensors
Compressed: 10.6"
Extended: 14.75"
Ride Height: 13"
Stroke: 4.1
Mount: Bearing
Retail is $1200 plus I paid 400 per bag to have the internal sensors put in
Looking for $1450
Ride Tech 5 Gallon Air Pod with twin compressors, upgraded ECU to ridepro and optional Internal Sensors and remote key fob option - brand new - used only to mock up air suspension
With the options and add on's this sells for $2750
Looking to get $1900
The Ride Tech parts were only used for mockup, and have no actual miles on them. I decided to change engines in my car, and go a completely different route with suspension; as a result, I have no use for the ride tech stuff.
Also have 67-70 Mustang Baer Brake Hub assemblies with Baer Brake bracketry for 13 or 14" brakes, and Baer Brake rotor hats
These aren't normally sold in pieces like this (the 13 or 14" 6 piston baer kit will run about $2400)
All you would need are rotors and calipers
Looking to get $500 for the brackets, spindles, and hubs
Also have a 67-70 Mustang Rack and Pinion Complete steering setup - this was used for approx 800 miles (a summer and a half before I took my car off the road to change it) The new front clip I have includes a rack and so I have no use for this anymore
This comes with the power steering pump, and bracketry for a windsor based small block
Looking to get $800
Thanks
Tom
Rear Shockwave 7000 Master Series Pair with external Sleeves to protect from heat
Part number# 2115071 single adjustable
upgraded to Internal Ride Height Sensors
Compressed: 11.5"
Extended: 16.5"
Ride Height: 14.5"
Stroke: 5
Mount: Bearing
Retail is $900 plus I paid 400 per bag to have the internal sensors put in
Looking for $1200
Front Shockwave 1000 Master Series Pair
Part number # 21240101 double adjustable
upgraded to Internal Ride Height Sensors
Compressed: 10.6"
Extended: 14.75"
Ride Height: 13"
Stroke: 4.1
Mount: Bearing
Retail is $1200 plus I paid 400 per bag to have the internal sensors put in
Looking for $1450
Ride Tech 5 Gallon Air Pod with twin compressors, upgraded ECU to ridepro and optional Internal Sensors and remote key fob option - brand new - used only to mock up air suspension
With the options and add on's this sells for $2750
Looking to get $1900
The Ride Tech parts were only used for mockup, and have no actual miles on them. I decided to change engines in my car, and go a completely different route with suspension; as a result, I have no use for the ride tech stuff.
Also have 67-70 Mustang Baer Brake Hub assemblies with Baer Brake bracketry for 13 or 14" brakes, and Baer Brake rotor hats
These aren't normally sold in pieces like this (the 13 or 14" 6 piston baer kit will run about $2400)
All you would need are rotors and calipers
Looking to get $500 for the brackets, spindles, and hubs
Also have a 67-70 Mustang Rack and Pinion Complete steering setup - this was used for approx 800 miles (a summer and a half before I took my car off the road to change it) The new front clip I have includes a rack and so I have no use for this anymore
This comes with the power steering pump, and bracketry for a windsor based small block
Looking to get $800
Thanks
Tom