Production #54 '69 Camaro

[youthpastor]

Here's a new project in the shop that I am stoked about. http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/016.jpg

It was a first day Van Nuys car factory Orange. It was started on about 5 years ago to be a 427 COPO clone...and it is VERY clean.

A great client and friend of mine picked it up about a month ago to do a killer Pro-Touring make-over.

Engine will be a - Wegner Motorsports 850Hp LS

we are doing a full Art Morrison suspension and frame package with DSE tubs.

Rushforth Design rendering

Custom interior with one of Marquez' new '69 dashes. I promise lots of build photos and updates:cheers:

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/014-1.jpg

[youthpastor]

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/005-1.jpg

first day I saw it
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/006.jpg

I later found out that my friend who painted my silver '68 and the red '69 did this one also!

[70rs]

Congrats on the next project Chris!
That's a really nice looking car to start with.

I'll hold you to the ” lots of pictures and updates” on this one! :D

[Spiffav8]

Here we go!

:unibrow:

[MattG]

Looking forward to this one.

Car looks like it just saw a mouse!!!!

[youthpastor]

thanks man...ya she's standing tall!

[DOOM]

Can't wait to see this one Chris!!!!

[awr68]

Very cool! Can't wait to see it get the treatment!! :thumbsup:

[tones2SS]

Clean car. Should be a great transformation.
Can't go wrong with a Wegner engine too.:unibrow:

[Rybar]

Can't wait to see this one come together and the typical CHC slammed stance :unibrow:

[youthpastor]

picked up some goodies at Art Morrison today
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/030-Copy.jpg

lots of cool new features, NEW rack from DSE, new style sway bar

so we started ripping into it today
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/037-Copy.jpg
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/040.jpg

[youthpastor]

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/037-Copy.jpg
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/036-Copy.jpg

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/043.jpg

[youthpastor]

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/034-Copy.jpg
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/041.jpg

happy Thanksgiving!

[70rs]

Very nice list of goodies!

[tones2SS]

Great updates Chris.

[randy]

prob a stupid question but why did you switch the art morrison rack for a dse one?

[youthpastor]

prob a stupid question but why did you switch the art morrison rack for a dse one?

Not a stupid question at all- Art Morrison supplied the rack along with DSE minitubs

[randy]

what was the deciding factor in using the art morrison clip instead of the DSE one? Whats the total cost involved in the art morrison clip

[youthpastor]

what was the deciding factor in using the art morrison clip instead of the DSE one? Whats the total cost involved in the art morrison clip

oh man- they are both killer pieces along with Speedtech- I don't think I can go wrong with any of them.

For me it was, Craig is a friend of mine, I'm a dealer for Speedtech and Morrison and Morrison is 10 minutes from my shop instead of across the country

there is an extensive thread on DSE vs Morrison clips if you do a search

[DIGI-TAILS]

Good progress... Good luck on this one!!! :)

[youthpastor]

We've made some good progress the past few weeks. The rear clip is welded in. We Modified the frame connectors to work like DSE ones- they sit nice and tight above the rockers. Brakes, Shock, suspension is all mocked up

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/133.jpg

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/130.jpg

The engine is in route from Wegner. The dyno sheet put it at 849.2 HP, but the cool part is it made over 700ft. from 3500-6200rpm's!! peaking at 4400 at 797! WOW!

[Rybar]

Looks good Chris, I'm curious to see install pics of that rear clip. Do you have any?

[youthpastor]

Looks good Chris, I'm curious to see install pics of that rear clip. Do you have any?

I will get some good pics when it goes back on the rack. Removing the rails was tricky not to swiss-cheese the floor. AME recommends leaving that small strip and just trim the rails up to the floor

[youthpastor]

With a Wegner Motorsports 416 LS
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/395251_10150607757007803_528647802_10822126_972633 198_n.jpg

It made an honest 849.2 HP but the cool part is it made over 700 ft lbs of from 3500-6200! Peaking just under 800 at 4800.

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/406499_10150608727592803_528647802_10825573_211495 9218_n.jpg
We couldn't wait to get it mocked up.

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/403898_10150608501032803_528647802_10825071_162286 6404_n.jpg
Here's a glance of 3 of the LS projects going together right now.

[Musclerodz]

With a Wegner Motorsports 416 LS
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/395251_10150607757007803_528647802_10822126_972633 198_n.jpg

It made an honest 849.2 HP but the cool part is it made over 700 ft lbs of from 3500-6200! Peaking just under 800 at 4800.

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/406499_10150608727592803_528647802_10825573_211495 9218_n.jpg
We couldn't wait to get it mocked up.

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/403898_10150608501032803_528647802_10825071_162286 6404_n.jpg
Here's a glance of 3 of the LS projects going together right now.

crazy low end power these things are making. Ours made a tad more, but in all fairness I think Casey only heard "break it" and not "break it in":lol: Are you leaving the gas pedal out? Your not gonna need it:_paranoid

did they dyno it with the 105mm tb?

[Bucketlist2012]

With a Wegner Motorsports 416 LS
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/395251_10150607757007803_528647802_10822126_972633 198_n.jpg

It made an honest 849.2 HP but the cool part is it made over 700 ft lbs of from 3500-6200! Peaking just under 800 at 4800.

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/406499_10150608727592803_528647802_10825573_211495 9218_n.jpg
We couldn't wait to get it mocked up.

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/403898_10150608501032803_528647802_10825071_162286 6404_n.jpg
Here's a glance of 3 of the LS projects going together right now.

Wow...another really nice build coming. :woot: :woot:

Great work you are doing..

Mike V:cheers:

[syborg tt]

Another great project can't wait to see this one finished.

ps my motor is heading to Wegner in about 3 weeks

[waynieZ]

That an awesome car to start with. I love their motors amazing power.
subscribed

[EBMC]

Cool projects goin on Chris! congrats :cheers:

[tones2SS]

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/403898_10150608501032803_528647802_10825071_162286 6404_n.jpg


Good stuff right there. Nice build Chris.

[coolwelder62]

Wow!! that motor is the Bomb.:thumbsup: :thumbsup: :thumbsup:

[Gandalf]

It made an honest 849.2 HP but the cool part is it made over 700 ft lbs of from 3500-6200! Peaking just under 800 at 4800.

If I could create a new religion - it would revolve around words like these :-)

Very nice.
G.

[Van B]

The engine is in route from Wegner. The dyno sheet put it at 849.2 HP, but the cool part is it made over 700ft. from 3500-6200rpm's!! peaking at 4400 at 797! WOW!

Great people and long time family friends. It's been a while since I have been up there. Who were you working with there?

[Tom.A]

Great project and that is some big HP.

[youthpastor]

Great people and long time family friends. It's been a while since I have been up there. Who were you working with there?.

Carl and Casey. It all started with a set of Valve covers for another car. Carl gave me his cell # and said call anytime! Customer service has been outstanding:thumbsup:

[youthpastor]

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/Feb22c.jpg
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/Feb22d.jpg

[youthpastor]

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/Feb22b.jpg
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/Feb22a.jpg


We are kinda doing things different on this one since it was already painted. We wanted to mock it up before we blew everything apart and added lots of little custom touches- tucked bumpers, little carbon fiber accents. Here's a question for you guys...What color interior? The red calipers can be changed. Jason Rushforth is working on some really killer ideas. We are using some trick new pieces we saw at SEMA from Marquez. The Tiger cage is paritally installed. We are running one of Rick's tanks trick new baffled tank. Should be a fun car to get some track time with

[tmadden]

Wheels, tires and stance make all the difference in the world! WOW!!!!
Great work!

[214Chevy]

Maaaan, that rear is meaty. Niiiice!!!!:wow: :wow: :wow: :wow: :wow: :wow: :wow: :wow: :wow: :wow:

[70rs]

Hey Chris, great looking car. On the calipers, in my opinion the red calipers look good but are kind of over played on so many cars. Maybe something more subtle like gunmetal grey, silver or black but with red lettering to tie into the interior?
Just a thought. It really doesn't matter because everything you turn out looks fantastic anyway.

It was great talking to you at the swapmeet. Take care buddy!

[Musclerodz]

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/Feb22a.jpg

Are those shocks hooked up? They look to be below the scrub line which would not be good if you have a flat. They don't look to be but can't tell for sure.

[youthpastor]

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/Feb22a.jpg

Are those shocks hooked up? They look to be below the scrub line which would not be good if you have a flat. They don't look to be but can't tell for sure.
no, we just unhooked them to set up some mock up height

[youthpastor]

Looks pretty sweet! I did a white Judge a while back and it had a red interior and I really liked the color combo. I'd go red! You woundn't have to change the color on the calipers that way.

I totally agree, that was my vote- It would really pop against the white:D

[KPC67]

Wow the stance, and wheels are killer!

[mad68rs]

looks great! the stance and wheel and tire combo is right on

[youthpastor]

looks great! the stance and wheel and tire combo is right on

thanks man! here are some more photos
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/Feb22b.jpg
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/Chrispi79.jpg
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/Chrispi80.jpg

[youthpastor]

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/Chrispi76.jpghttp://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/Chrispi84.jpghttp://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/Chrispi85.jpg

[waynieZ]

Very Nice.

[89 RS]

Looks awesome, very clean looking. :thumbsup:

[Musclerodz]

I don't know the last time I saw a red on white car. Would be cool.

[youthpastor]

We are back on this one now that the owner's Chevelle is about wrapped up.

We went with some rear tail-pan updates. The filler is moved up between the taillight. The rear exhaust tips will mimic the taillight angles. Which meant we cut out the Art Morrison frame rails and made custom pieces that hug the quarterpanels to free up room for the exhaust. Make sense? And standard fare was sectioning the rear bumper to bring it in a bit.
http://chrisholstromconcepts.com/wordpress/wp-content/gallery/6-mitchell-69-camaro/071.jpg
http://chrisholstromconcepts.com/wordpress/wp-content/gallery/6-mitchell-69-camaro/070.jpg
http://chrisholstromconcepts.com/wordpress/wp-content/gallery/6-mitchell-69-camaro/072.jpg

[youthpastor]

http://chrisholstromconcepts.com/wordpress/wp-content/gallery/6-mitchell-69-camaro/photo-10.jpg
http://chrisholstromconcepts.com/wordpress/wp-content/gallery/6-mitchell-69-camaro/photo-5.jpg
http://chrisholstromconcepts.com/wordpress/wp-content/gallery/6-mitchell-69-camaro/photo-9.jpg

[canrc]

Great work -- that looks amazing! :thumbsup:

[KPC67]

yup, I love this car! :thumbsup:

[Jr]

Yeah, this 69 has a very nice stance! Good job.

[youthpastor]

Thanks guys...I'm finally learning to build the exhaust up into the floorboards. Last Camaro we did, that is the first thing that hits, and it just looks ugly hanging out under the car

[youthpastor]

We had this car on display at Puyallup Goodguys last weekend. It was really received. Here are some updates.

Probably the coolest part about the rear end work is the way the rear frame rails kick out to the quarter panels to open up room for the 3" exhaust and Rick's Tanks
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/0402_zpse309123c.jpg (http://s250.photobucket.com/user/LS168/media/Number%2054%2069%20Camaro%20COPO/0402_zpse309123c.jpg.html)

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/0132_zps3d794bff.jpg (http://s250.photobucket.com/user/LS168/media/Number%2054%2069%20Camaro%20COPO/0132_zps3d794bff.jpg.html)

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/009_zps0f677979.jpg (http://s250.photobucket.com/user/LS168/media/Number%2054%2069%20Camaro%20COPO/009_zps0f677979.jpg.html)

[youthpastor]

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/003_zps8989f558.jpg (http://s250.photobucket.com/user/LS168/media/Number%2054%2069%20Camaro%20COPO/003_zps8989f558.jpg.html)

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/2e62be7c-3666-4e45-be47-31353cb93db2_zps76991617.jpg (http://s250.photobucket.com/user/LS168/media/Number%2054%2069%20Camaro%20COPO/2e62be7c-3666-4e45-be47-31353cb93db2_zps76991617.jpg.html)

modified DSE firewall plate
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/IMAG14781_zpsfaf5b272.jpg (http://s250.photobucket.com/user/LS168/media/Number%2054%2069%20Camaro%20COPO/IMAG14781_zpsfaf5b272.jpg.html)

[youthpastor]

We removed the rear spoiler...'cause everybody know's first gen Camaros look better without it:poke:
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/105_zpsdd4fc300.jpg (http://s250.photobucket.com/user/LS168/media/Number%2054%2069%20Camaro%20COPO/105_zpsdd4fc300.jpg.html)

[youthpastor]

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/DSC_0052_zps6bc729db.jpg (http://s250.photobucket.com/user/LS168/media/Number%2054%2069%20Camaro%20COPO/DSC_0052_zps6bc729db.jpg.html)
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/DSC_0053_zps6c40fb49.jpg (http://s250.photobucket.com/user/LS168/media/Number%2054%2069%20Camaro%20COPO/DSC_0053_zps6c40fb49.jpg.html)
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/DSC_0055_zpsaf74bec2.jpg (http://s250.photobucket.com/user/LS168/media/Number%2054%2069%20Camaro%20COPO/DSC_0055_zpsaf74bec2.jpg.html)

[youthpastor]

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/DSC_0054_zpsc771dec4.jpg (http://s250.photobucket.com/user/LS168/media/Number%2054%2069%20Camaro%20COPO/DSC_0054_zpsc771dec4.jpg.html)
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/IMAG14731_zpse9e59341.jpg (http://s250.photobucket.com/user/LS168/media/Number%2054%2069%20Camaro%20COPO/IMAG14731_zpse9e59341.jpg.html)
http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/DSC_0058_zps2c6114aa.jpg (http://s250.photobucket.com/user/LS168/media/Number%2054%2069%20Camaro%20COPO/DSC_0058_zps2c6114aa.jpg.html)

[youthpastor]

http://i250.photobucket.com/albums/gg268/LS168/Number%2054%2069%20Camaro%20COPO/DSC_0048_zps4cab1b72.jpg (http://s250.photobucket.com/user/LS168/media/Number%2054%2069%20Camaro%20COPO/DSC_0048_zps4cab1b72.jpg.html)

It's staying white with red interior by Tracy Weaver.

The plan is to ship it out to Nebraska in the spring and pick the car up and finally go to Columbus next year

[Vince@Meanstreets]

hi chris, great fab work. your guys are good.

can you give us details on that filler tube please?

[youthpastor]

That is made on the lathe and will have a spring loaded center to push and release-

[DOOM]

Chris the metal work is outstanding!

[WSSix]

Looks great!

[tones2SS]

Chris the metal work is outstanding!

^^What Mario said. Looks killer!

[tmadden]

Really digging this car. Love the white and red combo.

[youthpastor]

Thanks guys! Josh Ewing will be wrapped up soon on the metal work. Then we can get all the assembly and paint finished.

[syborg tt]

Chris - the car looks fantastic

[jdeliveryguy]

Any updates?

[frankv11]

That is some fine metal you guys are doing over there. I especially like the unconventional curvature of the work.

[waynieZ]

Chris the car looks awesome. I love the fab work.

[youthpastor]

Chris the car looks awesome. I love the fab work.


Thanks guys!! metal work is almost done- We can get this thing wrapped up. I am dying to hear that 850HP Wegner motor

[Ricochet]

I must be asleep or something...First time I have seen this thread. Amazing metal work Chris! The inner wheel wells looks great, amongst everything else! More pics please!!

[pitts12driver]

Great work! Looks amazing and coming along well.

[waynieZ]

The motor should sing a sweet song in this car!

[jdeliveryguy]

Hey Chris the stance is awesome, I searched thread but couldn't find the wheel and tire sizes you used. Can you post them. Thanks

[youthpastor]

Lots to update on this build. We got it back from Josh Ewing a few months back with all the metal work wrapped up. He did a phenomenal job!

Paint is done, engine is installed. Cut out the dash today and trial fit the Marquez unit. Engine, trans and rear end is finally back in the car for the final time. A million little details to go. If you Noticed we shipped the wheel centers back to Forgeline to get gunmetal grey instead of silver.

Can someone help me with the images- I can't get them to save and load, only the links

http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a4867ee4b00ca08be2672b/5409e320e4b04c699fbf7fd8/1409934117956/1969%20Mitchell%20Camaro%20IMG_4814-Edit.jpg?format=1500w

http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a4867ee4b00ca08be2672b/5409e31ee4b0b3642fedbc45/1409934112389/1969%20Mitchell%20Camaro%20DSC_0739-Edit.jpg?format=1500w

http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a4867ee4b00ca08be2672b/5409e31de4b0788382ace30c/1409934111784/1969%20Mitchell%20Camaro%20DSC_0747.jpg?format=150 0w

[youthpastor]

More updates and photos to come. Side glass is going in tomorrow along with finishing up wiring and under-dash plumbing. We are really excited to see this one come together. - Chris

[tubbed69]

Chris we need more pics,work looks great as always:trophy-1302:

[Musclerodz]

remove the url text after jpg and add around url

http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a4867ee4b00ca08be2672b/5409e320e4b04c699fbf7fd8/1409934117956/1969%20Mitchell%20Camaro%20IMG_4814-Edit.jpg

http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a4867ee4b00ca08be2672b/5409e31ee4b0b3642fedbc45/1409934112389/1969%20Mitchell%20Camaro%20DSC_0739-Edit.jpg

http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a4867ee4b00ca08be2672b/5409e31de4b0788382ace30c/1409934111784/1969%20Mitchell%20Camaro%20DSC_0747.jpg

[Vince@Meanstreets]

looking good....I like the painted trans.

[Z06Joe]

Awesome build and quality of work!!! Love that rear roll pan/exhaust section!!!

[waynieZ]

The motor looks great in there. Beautiful car.

[tones2SS]

That is looking very nice.
Good job.

[youthpastor]

Thanks guys..I will get up more photos- just wanted to tease you a little. We will be back at Dynomax inside Hot Rod Alley if you are going down to SEMA- I would love to say "hi"- :hello:

[tmadden]

Man that looks sweet!!!!

[Al Moreno]

Love the satin white for the engine bay. Makes for a great back drop to frame the engine. Those sinners fenders have got to be some of the nicest I've seen modified for a 1st gen Camaro, great jod! :thumbsup:

[syborg tt]

Thanks guys..I will get up more photos- just wanted to tease you a little. We will be back at Dynomax inside Hot Rod Alley if you are going down to SEMA- I would love to say "hi"- :hello:

Car looks great but you should also post a few pics of the C10

[youthpastor]

Thanks guys. Mike thanks for the help on posting pics. Marty the C-10 is a really cool truck with a great client. Just restored when we got it and put the full Ridetech level 2 coil suspension, Baer 6P's with 14" rotors and Forgelines. We started the rear end install yesterday 9" Ford. I will get some good shots when it rolls again. This winter means an LS.



http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a843b3e4b0a55bf507d1be/53a843bfe4b0a55bf507d1da/1403536336811/IMG_4258.jpg

[youthpastor]

and one more
http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a843b3e4b0a55bf507d1be/53a9aed7e4b0a60b51119c20/1403629280752/IMG_4324.jpg

more pics of the Camaro
http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a4867ee4b00ca08be2672b/54127d38e4b0ccc9ec8c1fdf/1410497850318/DSCF1491-Edit-Edit-Edit.jpg

http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a4867ee4b00ca08be2672b/54127d33e4b0ccc9ec8c1fd8/1410497847127/DSC_0948.jpg

http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a4867ee4b00ca08be2672b/54127d3ae4b0ccc9ec8c1fe1/1410497853242/IMG_4824.jpg

[youthpastor]

http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a4867ee4b00ca08be2672b/54127d3ce4b04f3b28c3c58f/1410497854562/IMG_4848.jpg

a little underside shot. I closed off the front crossmember and some punch press action.

Exhaust is all 3" and goes above the fuel tank and is totally tucked up

[youthpastor]

http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a4867ee4b00ca08be2672b/54127d3fe4b04f3b28c3c59b/1410497857765/IMG_4857.jpg

http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a4867ee4b00ca08be2672b/54127d3fe4b06f3fdeffb46b/1410497857215/IMG_4859.jpg

http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a4867ee4b00ca08be2672b/54127d41e4b04f3b28c3c59d/1410497859303/IMG_4871.jpg

[youthpastor]

http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a4867ee4b00ca08be2672b/54127d40e4b06f3fdeffb46d/1410497858760/IMG_4874.jpg

http://http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a4867ee4b00ca08be2672b/54127d34e4b04f3b28c3c580/1410497849361/DSC_0980.jpg

http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a4867ee4b00ca08be2672b/54127d43e4b04f3b28c3c59f/1410497860740/IMG_4912.jpg

http://static.squarespace.com/static/525ecce8e4b02bebac6582af/53a4867ee4b00ca08be2672b/54127d34e4b04f3b28c3c580/1410497849361/DSC_0980.jpg

[syborg tt]

Wow - Chris does this car look nice.

I can't wait to see this one in person.

[Ron in SoCal]

Wow - Chris does this car look nice.

I can't wait to see this one in person.

X2 Marty. Well done Chris!

[Vince@Meanstreets]

Nice work up there Chris.

55" wide rear end. Love the dish on the back back wheels.

[Ricochet]

Looks great Chris!! Can't wait to see it at SEMA!!! MagnaFlow booth again?

[tones2SS]

Very, very nice Chris.
Keep us posted please!

[WSSix]

Very clean. I love it! The transmission being painted the same color as the engine which contrasts nicely with the other colors was a great choice. Good luck!