C6 gear vendor kit.

[philofab]

I've got a complete gear vendor for a 2wd C6. Includes extension housing output yoke, GV, controller box, VSS, switches, manual. it's used but works fine. I am swapping to a 5 speed and will no longer need this.

$700, and free shipping in the 48.

Located in AZ 86442

This would be a good way to add OD without installing a different trans. Adapters are available for a lot of transmissions.

http://www.philofab.com/phorged/gv1.jpg
http://www.philofab.com/phorged/gv2.jpg

Ignore all the fluid & dirt on it. I snapped the band on my C6 and got it over 300 degrees, so it made a mess.

[philofab]

I was looking through my stuff and it looks like I also have a Turbo 400 adapter and coupler.

[philofab]

http://tapatalk.com/mu/209138ac-b7ab-8033.jpg

http://tapatalk.com/mu/209138ac-b7be-797d.jpg

http://tapatalk.com/mu/209138ac-b7d5-515b.jpg

These are pictures of the 6" turbo 400 adapter and basket case GV I have. There is something wrong with this one and someone disassembled it, but all the parts are here. It is also available.

[philofab]

C6 gear vendor is sold.

[scarter455]

How much for the th400 GV kit?

[philofab]

How much for the th400 GV kit?

$400 for the whole thing, the overdrive itself needs to be fixed and is currently partially disassembled. I have no idea whats wrong with it.

I have all the parts for the unit, the Turbo 400 adapter and coupler, but no output yoke. I have no idea if it's a standard part or not.

[philofab]

Unit were both SOLD.