What T56 x-member with Wayne Due subframe

[rsimons]

I have a Wayne Due C4 subframe in my 67 Firebird. I'm wondering if there is a trans crossmember that will fit for a T56. The width from frame rail to frame rail is 31" which is narrower than stock. I appreciate anyone's advice on this. Thanks.

[J2SpeedandCustom]

We always make a custom tube one so the exhaust fits, but you can always buy a generic one from chassis works, cpp, http://www.classicperform.com/Store/1962_67_Chevy_Nova/XMCA67697.htm etc it should fit with little modification.

[rsimons]

Thanks for the advice. That one would have to be narrowed. It looks like the Heidts crossmember may mount similarly to the Wayne Due.

[Vince@Meanstreets]

I have a Wayne Due C4 subframe in my 67 Firebird. I'm wondering if there is a trans crossmember that will fit for a T56. The width from frame rail to frame rail is 31" which is narrower than stock. I appreciate anyone's advice on this. Thanks.

The last one I did we used a 70 Camaro crossmember, chopped the mount plate and rewelded it lower on the cross member. The outer crossmember mounting flanges are long enough so we just redrilled a few holes.

[Lenie]

http://www.cachassisworks.com/Attachments/DataSheets/g-TransXmbrs_DS_WEB.pdf

[Z06vette]

I usd the BMR cross member for a OD automatic. I shaved the ends of the flat metal mounting area but still used origianl holes & just drilled holes where needed on the wayne due mounting surface. Can take pics if needed.
Scott