PDA

View Full Version : Shop line epoxy primer question

orangevert
10-03-2011, 06:35 PM
I'm going to be using shop line epoxy primer? 2-1 but how much reducer should I use?

New to spraying auto paint. Just spraying the subframe and under the car, So I figure these are the area's to learn..

Thanks Kirk
NovaBlue71
10-03-2011, 06:58 PM
If you haven't bought the shop line epoxy do your self a favor and check out Southern Polyurethanes epoxy primer. Hands down some of the best epoxy you will ever use. :thumbsup: Joe
Autokraft
10-03-2011, 07:26 PM
Yep listen to Joe on this one. It is some good stuff :thumbsup:
elitecustombody
10-03-2011, 07:40 PM
PPG says you can add up to 10% of acetone to already activated primer.

http://www.bapspaint.com/docs/psheets/PPG/Automotive/Shopline/JP370.pdf

I would never use acetone or lacquer thinner for thinning anything, just for cleaning .
orangevert
10-04-2011, 05:26 AM
If you haven't bought the shop line epoxy do your self a favor and check out Southern Polyurethanes epoxy primer. Hands down some of the best epoxy you will ever use. :thumbsup: Joe

Thanks for the reply, I already bought it. My plan for this product is for subframe and bottom of the car.

Thanks Kirk
orangevert
10-04-2011, 05:29 AM
PPG says you can add up to 10% of acetone to already activated primer.

http://www.bapspaint.com/docs/psheets/PPG/Automotive/Shopline/JP370.pdf

I would never use acetone or lacquer thinner for thinning anything, just for cleaning .

Thanks for the thread, I'm going to be needing a front fender,So I'll be PM you in a month or so.

Thanks Kirk