MotleyDrew
09-04-2011, 08:02 PM
Hey guys
I tend to troll on here more than anything but I thought I would post my creation. After lots of time and money I am just awaiting a final tune on the car and it will be complete. I bought this car in 2003 with 17km on it (canadian car). I now have 27,000 miles on it. Only about 5000 of which are on the new drivetrain. I would love to get thing thing out to a standing mile event before anything else just to make sure its running well and see how it reacts to very high speeds. I do all the work on this car myself so it was almost like having 2 jobs for a while. What my goal was with this vehical was to create a stock mannered car with stereo, air, etc with the ability of all out performance. Its a fun buggy and hope you all enjoy the pics. take care :)
Modifications
Motor:
403ci A&A Corvettes Forged and Stroked Aluminum Block LS2 Motor
4.005" bore 4.00 stroke
Solid Stainless Valves made by “SI”
-14cc Dish Forged Manley Pistons
Forged Eagle Crank
Skat Forged 6.125 rods
Hellfire Rings
ARP Main Studs
Clevite Bearings
Ported Oil Pump
Patriot Dual Springs
Comp Cams Cromolly Hardened Pushrods
RPM Motors Inc CHE Modified Rockers
Custom ground blower Comp Cams 214-226/259-269-115 LSA
Roll Master Double Timing Chain & Gears
9.6:1 Compression
Edelbrock Aluminum 215cc CNC milled by West Coast Racing Cylinder Heads 74cc
Innovators West Custom 8” Balancer SFI SPEC 18.1
A&A Billet Aluminum MAF Scattershield
K&N Valve Cover Breather
Custom Painted Valve Covers/ Fuel Rail Covers by Ottawa Valley Custom Paint
Ignition:
Taylor 409 10.4MM Race Wires
Optima Red Top Extreme Duty Cycle Battery
NGK-3346-BR7EF (0.030" gap, two steps colder)
Fuel System:
RSI Stage 3 Advanced Fuel System
Twin In-tank Walbro GSS341 255lph Fuel pumps
-6 Braided steel lines throughout
Adjustable Aeromotive Polished Fuel Pressure Regulator
-10 RSI Fuel Rails Powder Coated Black
VDO Fuel Pressure Gauge on FP Regulator
80 lb High Impedance Ford Racing Injectors
A&A Progressive Methanol Injection Kit (Cooling Mist)
Power Adder:
A&A Vortech Polished V7 YSI-Trim Supercharger Kit
A&A Large Dongle Air Intake and Filter
A&A Air to Air Intercooler
Polished Vortech Mondo Bypass Valve
A&A 8 rib pulley setup
A&A belt Tensioner system with HD Tensioner
Champion MotorSports Pulleys
Cartek Flip Drive Pulley System
Crilly Chassis Works Custom Intercooling Piping and other modifications
Cooling:
Dewitts High Capacity Aluminum Radiator
Dewitts High flow Dual Spal Fan Shroud
180 degree thermostat
A&A Air Filter
Throttle Coolant Bypass
Air Flow hood lip liner
Exhaust:
American Racing Long Tube Headers 1 7/8 Race Headers
Random Technology Matrix Hi Flow 3” Catalytic Converters
American Racing 3” X-Pipe and 3"extention pipes
SLP Power-Flo Cat-back System (modified)
Custom Heat Shield on Rear Bumper
Tuning:
HP Tuners Pro MPVI Tuning Software/Hardware
AEM Wide Band
Full tune by Arun Ahuja @ Canadian Performance Engines
Brakes:
C6 Z06 Cross Drilled Big Brake Kit
6 Piston Calipers Front, 4 Piston in back
Hawk Ceramic Brake Pads
Goodrich Stainless Braided Brake Lines
Cartek Line Lock-Kit
Transmission / Clutch:
RPM Level 5 M6
carbon syncros
billet keys
bronze pads
steel shift fork
cryoed gears
cryoed 30 spline output shaft
DTE Transmission/Rear End Strut Brace
Advanced Clutch Technologies Extreme Twin Disk Clutch and Billet Steel Flywheel ACT Twin T2S-G01 950lbtq
MGW Shifter
CAGS Skip shift Eliminator
Adjustable Tick/Tilton Master Cylinder
RPM Remote Clutch Bleeder
Rear End:
RPM Level 5
3 rib HD Z06 case
Billet alum pinion support
300M left output shaft
300M right output shaft and spider gear
HD Carbon clutch packs
HD clutch springs
Cryoed 3.42 Gear
30 spline gears
Suspension:
Stock Z06
Bilstein Sport Shocks
Lowered 2 inches
C6Z06 Sway Bar
Aluminum Suspension End Links
Chassis:
Wolfe Race Craft 6 point cage
Heavy Duty CCA Tunnel Plate
Exterior:
Stock Z06 Black
Modified Turn Signal Lights
Halo LED Taillights
ACP World Challenge Heat Extractor Hood
TPE T2 Fender Flares
22 % Tint on All windows
Shorty Antenna
C5R Front Splitter
Custom Z06 1000hp Anti-Venom Badges
CCW SP16A Forged Wheels
Powder Coated Black
18X10 and 19X13
275/35/18 and 345/30/19 Kumho Ecsta XS Tires for Street
Interior:
Stock Mod Red Z06
Autometer Z Series Boost Gauge
Autometer Z Series Fuel Pressure Gauge
Stewart Warner Digital Shift Light Gauge
AEM WideBand Gauge
Autometer Triple A-Pilar Gauge Pod
Column Lock Bypass
Italian Leather Shifter Boot
Italian Leather E-Brake Boot
Stereo:
Pioneer In-Dash 7”Touch Screen DVD AVH-P6800 Stereo Head Unit
2 - Cliff Designs 5 ¼” Mid Bass front
2 - Infinity Reference Mid 3.5” front
2 - Cliff Designs 1 inch tweeters
2 - Infinity Reference Rear Mid 5 ¼” Speakers
2 - Rockford Fosgate Punch II Dual Voice coil 8” Subwoofers
MB Quartz 5400 - 5ch Amplifier
Custom made door enclosures
Custom made Fiberglass Sub boxes
Blue Tooth Enabled with RIM Blackberry
Articles in Magazines:
http://www.planetlsx.com/vehicles/Sinister/81
http://www.vortechsuperchargers.com/global_item.php?gik=341
http://i998.photobucket.com/albums/af107/motleydrew/Aug%202011%20Z06/IMG_00000015.jpg
http://i998.photobucket.com/albums/af107/motleydrew/Aug%202011%20Z06/IMG_00000028.jpg
http://i998.photobucket.com/albums/af107/motleydrew/IMG_1587.jpg
http://i998.photobucket.com/albums/af107/motleydrew/Aug%202011%20Z06/IMG_00000030.jpg
http://i998.photobucket.com/albums/af107/motleydrew/Aug%202011%20Z06/IMG_00000015.jpg
http://i998.photobucket.com/albums/af107/motleydrew/Aug%202011%20Z06/IMG_00000031.jpg
I tend to troll on here more than anything but I thought I would post my creation. After lots of time and money I am just awaiting a final tune on the car and it will be complete. I bought this car in 2003 with 17km on it (canadian car). I now have 27,000 miles on it. Only about 5000 of which are on the new drivetrain. I would love to get thing thing out to a standing mile event before anything else just to make sure its running well and see how it reacts to very high speeds. I do all the work on this car myself so it was almost like having 2 jobs for a while. What my goal was with this vehical was to create a stock mannered car with stereo, air, etc with the ability of all out performance. Its a fun buggy and hope you all enjoy the pics. take care :)
Modifications
Motor:
403ci A&A Corvettes Forged and Stroked Aluminum Block LS2 Motor
4.005" bore 4.00 stroke
Solid Stainless Valves made by “SI”
-14cc Dish Forged Manley Pistons
Forged Eagle Crank
Skat Forged 6.125 rods
Hellfire Rings
ARP Main Studs
Clevite Bearings
Ported Oil Pump
Patriot Dual Springs
Comp Cams Cromolly Hardened Pushrods
RPM Motors Inc CHE Modified Rockers
Custom ground blower Comp Cams 214-226/259-269-115 LSA
Roll Master Double Timing Chain & Gears
9.6:1 Compression
Edelbrock Aluminum 215cc CNC milled by West Coast Racing Cylinder Heads 74cc
Innovators West Custom 8” Balancer SFI SPEC 18.1
A&A Billet Aluminum MAF Scattershield
K&N Valve Cover Breather
Custom Painted Valve Covers/ Fuel Rail Covers by Ottawa Valley Custom Paint
Ignition:
Taylor 409 10.4MM Race Wires
Optima Red Top Extreme Duty Cycle Battery
NGK-3346-BR7EF (0.030" gap, two steps colder)
Fuel System:
RSI Stage 3 Advanced Fuel System
Twin In-tank Walbro GSS341 255lph Fuel pumps
-6 Braided steel lines throughout
Adjustable Aeromotive Polished Fuel Pressure Regulator
-10 RSI Fuel Rails Powder Coated Black
VDO Fuel Pressure Gauge on FP Regulator
80 lb High Impedance Ford Racing Injectors
A&A Progressive Methanol Injection Kit (Cooling Mist)
Power Adder:
A&A Vortech Polished V7 YSI-Trim Supercharger Kit
A&A Large Dongle Air Intake and Filter
A&A Air to Air Intercooler
Polished Vortech Mondo Bypass Valve
A&A 8 rib pulley setup
A&A belt Tensioner system with HD Tensioner
Champion MotorSports Pulleys
Cartek Flip Drive Pulley System
Crilly Chassis Works Custom Intercooling Piping and other modifications
Cooling:
Dewitts High Capacity Aluminum Radiator
Dewitts High flow Dual Spal Fan Shroud
180 degree thermostat
A&A Air Filter
Throttle Coolant Bypass
Air Flow hood lip liner
Exhaust:
American Racing Long Tube Headers 1 7/8 Race Headers
Random Technology Matrix Hi Flow 3” Catalytic Converters
American Racing 3” X-Pipe and 3"extention pipes
SLP Power-Flo Cat-back System (modified)
Custom Heat Shield on Rear Bumper
Tuning:
HP Tuners Pro MPVI Tuning Software/Hardware
AEM Wide Band
Full tune by Arun Ahuja @ Canadian Performance Engines
Brakes:
C6 Z06 Cross Drilled Big Brake Kit
6 Piston Calipers Front, 4 Piston in back
Hawk Ceramic Brake Pads
Goodrich Stainless Braided Brake Lines
Cartek Line Lock-Kit
Transmission / Clutch:
RPM Level 5 M6
carbon syncros
billet keys
bronze pads
steel shift fork
cryoed gears
cryoed 30 spline output shaft
DTE Transmission/Rear End Strut Brace
Advanced Clutch Technologies Extreme Twin Disk Clutch and Billet Steel Flywheel ACT Twin T2S-G01 950lbtq
MGW Shifter
CAGS Skip shift Eliminator
Adjustable Tick/Tilton Master Cylinder
RPM Remote Clutch Bleeder
Rear End:
RPM Level 5
3 rib HD Z06 case
Billet alum pinion support
300M left output shaft
300M right output shaft and spider gear
HD Carbon clutch packs
HD clutch springs
Cryoed 3.42 Gear
30 spline gears
Suspension:
Stock Z06
Bilstein Sport Shocks
Lowered 2 inches
C6Z06 Sway Bar
Aluminum Suspension End Links
Chassis:
Wolfe Race Craft 6 point cage
Heavy Duty CCA Tunnel Plate
Exterior:
Stock Z06 Black
Modified Turn Signal Lights
Halo LED Taillights
ACP World Challenge Heat Extractor Hood
TPE T2 Fender Flares
22 % Tint on All windows
Shorty Antenna
C5R Front Splitter
Custom Z06 1000hp Anti-Venom Badges
CCW SP16A Forged Wheels
Powder Coated Black
18X10 and 19X13
275/35/18 and 345/30/19 Kumho Ecsta XS Tires for Street
Interior:
Stock Mod Red Z06
Autometer Z Series Boost Gauge
Autometer Z Series Fuel Pressure Gauge
Stewart Warner Digital Shift Light Gauge
AEM WideBand Gauge
Autometer Triple A-Pilar Gauge Pod
Column Lock Bypass
Italian Leather Shifter Boot
Italian Leather E-Brake Boot
Stereo:
Pioneer In-Dash 7”Touch Screen DVD AVH-P6800 Stereo Head Unit
2 - Cliff Designs 5 ¼” Mid Bass front
2 - Infinity Reference Mid 3.5” front
2 - Cliff Designs 1 inch tweeters
2 - Infinity Reference Rear Mid 5 ¼” Speakers
2 - Rockford Fosgate Punch II Dual Voice coil 8” Subwoofers
MB Quartz 5400 - 5ch Amplifier
Custom made door enclosures
Custom made Fiberglass Sub boxes
Blue Tooth Enabled with RIM Blackberry
Articles in Magazines:
http://www.planetlsx.com/vehicles/Sinister/81
http://www.vortechsuperchargers.com/global_item.php?gik=341
http://i998.photobucket.com/albums/af107/motleydrew/Aug%202011%20Z06/IMG_00000015.jpg
http://i998.photobucket.com/albums/af107/motleydrew/Aug%202011%20Z06/IMG_00000028.jpg
http://i998.photobucket.com/albums/af107/motleydrew/IMG_1587.jpg
http://i998.photobucket.com/albums/af107/motleydrew/Aug%202011%20Z06/IMG_00000030.jpg
http://i998.photobucket.com/albums/af107/motleydrew/Aug%202011%20Z06/IMG_00000015.jpg
http://i998.photobucket.com/albums/af107/motleydrew/Aug%202011%20Z06/IMG_00000031.jpg