HRD
08-13-2011, 07:36 PM
For those of you who may not know me, my name is Joe Lutz and I have a shop in Lenoir, NC. www.hotroddynamics.com
I have a brand new Heidt's complete suspension, front and rear, for a 2nd gen 70-73 Camaro with Wilwood brakes on the front. It is all powdercoated and bolts in without welding. The front suspension uses the stock subframe. The rear suspension is 4 link and comes with a factory welded 9" houding and empty center section. This was purchased for a pro touring project that I never got arround to building.
I'll take $4000 for all of it. It is located in Lenoir, NC. I prefer local pickup, but will ship anywhere in the cont US for $200. (828)381-0391 I can take credit card orders by phone. 828-381-0391
Here is a list of what is included.
Front upper arms CA-302
Lower coilover arms CA312-M
Billet adjustable coil overs CB-120
Front coil springs CB-1450-11
Wilwood disc brake kit DF-222-D-B
Bolt in 4 link kit RC-121-SM The rear also has adjustable coilovers. Not sure if it came in the 4 link kit, but I have them.
Subframe connectors RC-122
Driveshaft hoop RC-125
9" housing with Heidt's 4 link brackets factory welded on RC-130-60-H
Spindles. Not sure on that part #
All powdercoated.
All brand new.
Also powdercoated front tie rods and ends and center section for rear end. No gears or axles.
https://blufiles.storage.live.com/y1ppkEGdzL72UckAJPBFCN5jb7oIB0YSlL1QKPIjJLnU0DE6vI W-oR_4s1hKPJ-Z6cnAJDp-BQaBjbnV5xJD98_5A/resized_DSCN1705.JPG?psid=1
https://blufiles.storage.live.com/y1pPLyrCcDeIQ7LddfYnTMZu16juO08vZxbzkD1zsi5QdS3n9V SjAiZKwRXAJCytL2e3tFSP45JyjPh5iW_YtM22Q/resized_DSCN1706.JPG?psid=1
https://blufiles.storage.live.com/y1pdOm2JInaujypZx90bL8rolW7noC-kC_0Eh2xuSuNoCYk8Dv5nKirpGI-egxbxM7lzMdSN_KQpEUBaJBdI-3UQQ/resized_DSCN1710.JPG?psid=1
https://blufiles.storage.live.com/y1pJt5bNPXTStw7eIwqhygP8fMCoR6ypPXBlkd7LgCqHsxKtS_ eUjuVjXcHljqtwTTTRkmFowa3go2gRDo7dvBZ0g/resized_DSCN1714.JPG?psid=1
https://blufiles.storage.live.com/y1pkD-44W2UeNEJxrZAXY_J9kFkn8FMh6YgsZnZiytc2-179y8a4eTbRph0g_i6wvoOZs8UiLYVRGfRuoEjNAKu_w/resized_DSCN1718.JPG?psid=1
I have a brand new Heidt's complete suspension, front and rear, for a 2nd gen 70-73 Camaro with Wilwood brakes on the front. It is all powdercoated and bolts in without welding. The front suspension uses the stock subframe. The rear suspension is 4 link and comes with a factory welded 9" houding and empty center section. This was purchased for a pro touring project that I never got arround to building.
I'll take $4000 for all of it. It is located in Lenoir, NC. I prefer local pickup, but will ship anywhere in the cont US for $200. (828)381-0391 I can take credit card orders by phone. 828-381-0391
Here is a list of what is included.
Front upper arms CA-302
Lower coilover arms CA312-M
Billet adjustable coil overs CB-120
Front coil springs CB-1450-11
Wilwood disc brake kit DF-222-D-B
Bolt in 4 link kit RC-121-SM The rear also has adjustable coilovers. Not sure if it came in the 4 link kit, but I have them.
Subframe connectors RC-122
Driveshaft hoop RC-125
9" housing with Heidt's 4 link brackets factory welded on RC-130-60-H
Spindles. Not sure on that part #
All powdercoated.
All brand new.
Also powdercoated front tie rods and ends and center section for rear end. No gears or axles.
https://blufiles.storage.live.com/y1ppkEGdzL72UckAJPBFCN5jb7oIB0YSlL1QKPIjJLnU0DE6vI W-oR_4s1hKPJ-Z6cnAJDp-BQaBjbnV5xJD98_5A/resized_DSCN1705.JPG?psid=1
https://blufiles.storage.live.com/y1pPLyrCcDeIQ7LddfYnTMZu16juO08vZxbzkD1zsi5QdS3n9V SjAiZKwRXAJCytL2e3tFSP45JyjPh5iW_YtM22Q/resized_DSCN1706.JPG?psid=1
https://blufiles.storage.live.com/y1pdOm2JInaujypZx90bL8rolW7noC-kC_0Eh2xuSuNoCYk8Dv5nKirpGI-egxbxM7lzMdSN_KQpEUBaJBdI-3UQQ/resized_DSCN1710.JPG?psid=1
https://blufiles.storage.live.com/y1pJt5bNPXTStw7eIwqhygP8fMCoR6ypPXBlkd7LgCqHsxKtS_ eUjuVjXcHljqtwTTTRkmFowa3go2gRDo7dvBZ0g/resized_DSCN1714.JPG?psid=1
https://blufiles.storage.live.com/y1pkD-44W2UeNEJxrZAXY_J9kFkn8FMh6YgsZnZiytc2-179y8a4eTbRph0g_i6wvoOZs8UiLYVRGfRuoEjNAKu_w/resized_DSCN1718.JPG?psid=1