boonedog
08-12-2011, 06:16 PM
1972 chevy shortbed
fatmans front with stainless arms coilovers and manual rack
art morrisons rear clip with strange coilovers
9 inch rear with disc,detriot locker,strange 35 spline axles, strange s series carrier, 15x14 torq thurst II on new hoosier 31x18.5 pro street radials
new 15x6 torque thrust II on bfg's up front
nice pearl red paint, shaved markers frenched antenna,louvered tailgate its nice a paint not perfect but looks good also has a shaved firewall
coan racing turbo 350 with manual valvebody
B&M shifter (needs in installed)
510hp 383
4 bolt
afr 210 heads
all forged rotating assem
hyd roller cam for spray
carb shop carb
dart mainfold
msd probillet dist
summit 160ph fuel pump
ati balancer
summit 20gl fuel cell
powermaster starter
over 6k in engine alone
new painless direct fit harness
new ron davis douple pass radiator
full cage with front wheelbarrow bars
complete interior with new buckets , corbeau 5 point harness, leather door panels, autometer phantom guages, ididit column,lecara steering wheel
ok now what needs completed
brake lines need run, fuel lines are there just need terminated i have all -10 hose with fitting to get from the to the fuel pressure reg, needs a driveline, exhuast,wiring, and the sheetmetal work needs done in the bed.
would like to get right at 19.5k out of it will get pics up monday.
fatmans front with stainless arms coilovers and manual rack
art morrisons rear clip with strange coilovers
9 inch rear with disc,detriot locker,strange 35 spline axles, strange s series carrier, 15x14 torq thurst II on new hoosier 31x18.5 pro street radials
new 15x6 torque thrust II on bfg's up front
nice pearl red paint, shaved markers frenched antenna,louvered tailgate its nice a paint not perfect but looks good also has a shaved firewall
coan racing turbo 350 with manual valvebody
B&M shifter (needs in installed)
510hp 383
4 bolt
afr 210 heads
all forged rotating assem
hyd roller cam for spray
carb shop carb
dart mainfold
msd probillet dist
summit 160ph fuel pump
ati balancer
summit 20gl fuel cell
powermaster starter
over 6k in engine alone
new painless direct fit harness
new ron davis douple pass radiator
full cage with front wheelbarrow bars
complete interior with new buckets , corbeau 5 point harness, leather door panels, autometer phantom guages, ididit column,lecara steering wheel
ok now what needs completed
brake lines need run, fuel lines are there just need terminated i have all -10 hose with fitting to get from the to the fuel pressure reg, needs a driveline, exhuast,wiring, and the sheetmetal work needs done in the bed.
would like to get right at 19.5k out of it will get pics up monday.