View Full Version : Not shifting to 3rd
Twix27
08-02-2011, 08:09 PM
My turbo 350 will not shift into 3rd gear and i have the kickdown cable set up right and the modulator valve is still good. Can't figure it out. =/
rchaskin
08-03-2011, 07:49 AM
Check plastic teeth on governor.
It is behind a round "knock on" cap on the side of the trans.
I had a similar situation years ago.
Mine would only go in first & reverse though.
I pulled the governor out and no teeth left at all.
Good Luck!
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.