1969 camaro

[Jgpclone]

Hey what's up gentleman after selling my 1970 scsb c10 couple months ago i picked a 1969 camaro.my plans for the car is to b pushing 750hp lsx 427 twin turbo T56 6speed dse quaralink dse mini tub frame connector roll bar hre 540 wheels and wanye c4 sub frame all ready owen thanx to clay here on :lateral: also momo seats.I havent started to take it appart but will be soon.
on the side note ill be growing a mullet whens the car is done lmao cant have a 69 maro w/o a:cool: mullet jk:beavis:

[Ron in SoCal]

There you go, Danny! Nice start, Sir :thumbsup:

Keep in touch and we can compare ntoes!

[Jgpclone]

There you go, Danny! Nice start, Sir :thumbsup:

Keep in touch and we can compare ntoes!

thanx ron like i mention prior ill be building a almost bad ass ride like urs :hail: lmao:cheers:

[214Chevy]

Cool! Sounds like you have some great plans for this baby. Can't wait to see the motor.

[Jgpclone]

Cool! Sounds like you have some great plans for this baby. Can't wait to see the motor.

Thanx I'll b I'n the works with the motor I'n about 3-4 months :unibrow: "guesstamate"
Going to do the body work first ,but already have the diamon pistons thoe lol

[Gandalf]

Looks like a good start - get on it :-)

Where in SoCal are you?

Gregg

[waynieZ]

Nice project. It will definitly be a wild ride when your done.

[Jgpclone]

Looks like a good start - get on it :-)

Where in SoCal are you?

Gregg

thanx gregg im in sfv area

[Jgpclone]

Nice project. It will definitly be a wild ride when your done.

i hope so thanx wayne :thumbsup:

[coolwelder62]

Cool project.750HP WOW!! could you loan me about 200 of that for my camaro.:thumbsup:

[DOOM]

Bringing another one back! Good to see .....

[Jgpclone]

Cool project.750HP WOW!! could you loan me about 200 of that for my camaro.:thumbsup:

yes i can lmao but im going to need colladeral lol

[Jgpclone]

Bringing another one back! Good to see .....

yes sir ive allways wanted 1969 camaro

[Jgpclone]

more up dates pulled out the heavy front sub frame.installed wayne sub frame for mock up
http://i1239.photobucket.com/albums/ff509/818chango/IMG_0896.jpghttp://i1239.photobucket.com/albums/ff509/818chango/IMG_0904.jpg

[Jgpclone]

update its been a while since ive worked on my maro but back on the train again just picked up some 18" hre 540 ill post up pix later tonite

[Ron in SoCal]

Way to go Danny! Did you buy that gold center set that was FS?

[Jgpclone]

Way to go Danny! Did you buy that gold center set that was FS?

yes sir ron :hail: it was a hell of a deal :thumbsup: its almost been a year since i put hands on my maro but back on the train

[waynieZ]

Great to hear your back on it!

[Jgpclone]

here the sweet wheels im going to change the color in the future i have rehooped 3pc wheels so no biggie :unibrow:
http://i1239.photobucket.com/albums/ff509/818chango/IMG_2008.jpg
http://i1239.photobucket.com/albums/ff509/818chango/IMG_2005.jpg
http://i1239.photobucket.com/albums/ff509/818chango/IMG_2010.jpg

[Jgpclone]

Great to hear your back on it!

thanx wanye these past months ive been working like a slave and open a barber shop called So Cal Kutz .but now im put some real work in :D

[frankv11]

nice wheels, I like that color its got that classic feel

[Ron in SoCal]

yes sir ron :hail: it was a hell of a deal :thumbsup: its almost been a year since i put hands on my maro but back on the train

Good deal Bro! Vince at HRE is a great guy if you need any mods to the wheels...:cheers:

[Jgpclone]

nice wheels, I like that color its got that classic feel

thanx frank :thumbsup: but im might go with a different color black or a met grey

[Jgpclone]

Good deal Bro! Vince at HRE is a great guy if you need any mods to the wheels...:cheers:

thanx rod im going to rehoop the rear set as soon as i find out whats the shortest rear end i can drop in there:D

[Jgpclone]

update i started to take the car apart this week end

[Jgpclone]

update i started to take the car apart this week end

[Jgpclone]

finaly had some extra time today and started to strip the paint will try to wrap up the stripping tomorrow end on monday start to order my dse mini tub subframe connectors . its been a while since i touch the car
http://i1239.photobucket.com/albums/ff509/818chango/photo3.jpg
http://i1239.photobucket.com/albums/ff509/818chango/photo2.jpg
http://i1239.photobucket.com/albums/ff509/818chango/photo1.jpg

[Jgpclone]

what a day after stripping most of the paint and bondo i wil have to replace all the panels lmfao ,beer beer and more beer :lol:

[Rick D]

what a day after stripping most of the paint and bondo i wil have to replace all the panels lmfao ,beer beer and more beer :lol:

Yah but aren't you glad you didn't spend a 1000 or more to have bad sheet metal media blasted just so you can replace it :wow: Been there done that :willy:

[Jgpclone]

Yah but aren't you glad you didn't spend a 1000 or more to have bad sheet metal media blasted just so you can replace it :wow: Been there done that :willy:

very true my friend lol now im stuck with beer money lol

[Jgpclone]

update just bought the dse mini tubs and all the quarter panel sheet metal replacements from classic industries its gana be a new car again fml let the fun begin :unibrow:

[cencalc6]

:cheers:

[Ron in SoCal]

I had to look up fml...:lol:

Sounds great Danny! I wanna see it when you get ready to mock everything up..i.:cherrs:

[Rick D]

I had to look up fml...:lol:

Sounds great Danny! I wanna see it when you get ready to mock everything up..i.:cherrs:

Ok I can't find it! fml?? :mad:

And!!

:ttiwop:

[Jgpclone]

:cheers:

Sure could have a brewski right now lol fml is f*#€ my life

[Jgpclone]

I had to look up fml...:lol:

Sounds great Danny! I wanna see it when you get ready to mock everything up..i.:cherrs:



Thanx Ron I'll take pix as soon as the parts get delivered

[Jgpclone]

Ok I can't find it! fml?? :mad:

And!!

:ttiwop:



Pix will be up when I recive the parts

[Jgpclone]

UPDATE:so whats seams like a life time ,im slowly picking up a few parts like my dse 9"
t56 trans here some pix of mickey mouse work some one did fml where do they find these people.im use to fixing some ones else mistake since i do hvac service and repairs ect... any ways ill let my pix do the talking its like this on both side roof has a big dent back cowl is rusted and tail light housing has a dent on the driver side so ya the whole shell need to be redone
http://i1239.photobucket.com/albums/ff509/818chango/photo1-3_zps58a2e187.jpg
http://i1239.photobucket.com/albums/ff509/818chango/photo2-3_zpsf0f9f015.jpg
http://i1239.photobucket.com/albums/ff509/818chango/photo3-3_zps5b6c6557.jpg
http://i1239.photobucket.com/albums/ff509/818chango/photo4_zps30276287.jpg
http://i1239.photobucket.com/albums/ff509/818chango/photo2-3_zpsb94b505e.jpg
http://i1239.photobucket.com/albums/ff509/818chango/photo1-3_zpsbeb6475c.jpg

[frankv11]

Good to see you making some progress.

[Jgpclone]

Good to see you making some progress.

thanx frank i wish my progress was a lil bit faster havent had time really to put hands on the car,i work crazy hrs and any free time i get is taking care of my baby girl lol so its been hectic .now i can get the ball rolling and make it rain:G-Dub: car parts here we go lol

[Ron in SoCal]

Great parts selection and nice to see the project moving along Junky :thumbsup:

[Jgpclone]

Great parts selection and nice to see the project moving along Junky :thumbsup:

Thanx ron slowly but surely but almost getting the big ticket items :G-Dub: lol

[coolwelder62]

:thumbsup: What brand of stripper did use.

[Jgpclone]

:thumbsup: What brand of stripper did use.

i used Rust-Oleum/Aircraft spray remover but not get to far since i opend a can of worms :bang: :eek:

[firebirddady69]

will you be doing the sheet metal yourself?

[Jgpclone]

will you be doing the sheet metal yourself?

Yes sir big task but not affraid of it

[Jgpclone]

update so i was about to install the minitubs and few more things to replace so new direction relace all the floors in the car and all the outter panels :G-Dub:
http://i1239.photobucket.com/albums/ff509/818chango/photo1-3_zps7a2b67fd.jpg
http://i1239.photobucket.com/albums/ff509/818chango/photo2-3_zpsecf5b21f.jpg
trap door lol
http://i1239.photobucket.com/albums/ff509/818chango/photo1-3_zps7a2b67fd.jpg
and found more half ass metal work lol over lapped metal who does that
http://i1239.photobucket.com/albums/ff509/818chango/photo3-3_zpsec9e975d.jpg
http://i1239.photobucket.com/albums/ff509/818chango/photo4_zpsfd894322.jpg
http://i1239.photobucket.com/albums/ff509/818chango/photo5_zps2f00dcfc.jpg:lmao:

[frankv11]

And that's how it all starts. Next thing you know you'll be $70k into a car that is far from getting done:G-Dub:

[Jgpclone]

this is the order im going to start the repairs
fire wall kick panel
floor pan
trunk pan
tail light housing
roof panel smoth driprails
both quarter panels
:bang: lol = labor of love:lmao:

[Jgpclone]

And that's how it all starts. Next thing you know you'll be $70k into a car that is far from getting done:G-Dub:

frank lol :G-Dub: this is true

[makoshark]

And that's how it all starts. Next thing you know you'll be $70k into a car that is far from getting done:G-Dub:

I resemble that:lostmarbles:

[Jgpclone]

I resemble that:lostmarbles:

I guest we all have something in common lol

[Jgpclone]

UPDATE:
its been a few months since ive post up any updates been very busy with work and my 1 year old princess lol,i got a few parts ordered like my vaporworx tank with the mini cut corners fuel pump and harness and pending purchases quadralink bracketry .i havent got around to buying non of my sheet metal im focusing at the buying most my big ticket items before i cut into the car:bigun2: .i want to have most of the stuff so i dont lose any momentum so i can kick it in high gear
first order of business el tank-o
:ups:
http://i1239.photobucket.com/albums/ff509/818chango/photo4_zps3ce7455e.jpg (http://s1239.photobucket.com/user/818chango/media/photo4_zps3ce7455e.jpg.html)
this is only for mock up its my fully forged 370 out of my lil beast
http://i1239.photobucket.com/albums/ff509/818chango/photo1-3_zpsd84277bd.jpg (http://s1239.photobucket.com/user/818chango/media/photo1-3_zpsd84277bd.jpg.html)
http://i1239.photobucket.com/albums/ff509/818chango/photo3-3_zps5ea7e6a0.jpg (http://s1239.photobucket.com/user/818chango/media/photo3-3_zps5ea7e6a0.jpg.html)
muffler bearings lol this was the kit on my truck just for pix
http://i1239.photobucket.com/albums/ff509/818chango/photo1-3_zps4e75a1f9.jpg (http://s1239.photobucket.com/user/818chango/media/photo1-3_zps4e75a1f9.jpg.html)
http://i1239.photobucket.com/albums/ff509/818chango/photo2-3_zpsebc07659.jpg (http://s1239.photobucket.com/user/818chango/media/photo2-3_zpsebc07659.jpg.html)

[frankv11]

Good to see your still at it. I would leave the turbo humps sticking out of the hood exposed

[Jgpclone]

Good to see your still at it. I would leave the turbo humps sticking out of the hood exposed

Lmfao i sold the tt kit frank i didnt want to have it laying around so i just threw on the car