Project Passionately Pink Camaro

[PPinkCamaro]

Just as things are starting to bloom in Louisiana, local family is proposing the task of designing and constructing a breast cancer tribute car out of their 1972 Chevrolet Camaro for the 2011 SEMA Show in Las Vegas, Nevada. The project vehicle has been a family owned vehicle since the late 70′s and is the perfect way to bring attention to the cause. The Team has chosen the unique task of turning an iconic American muscle car into a more refined and environmentally conscious hot rod, but retains all the raw styling that this 70′s muscle car exudes. Our plans are to totally redo the suspension adding a fully adjustable performance Air Lift kit capable of high speeds and cornering like it’s hugging the highway. The Roadwire interior has multi tone fine black leather and saddle perforated alcantara surface along with the OEM slate and onyx black leather. The heated, comfortable seating will keep the passengers guessing that they are riding in a high end luxury sedan yet the 500hp LSx package will remind them ever so tastefully that this vehicle can truly “Race for a Cure”.

The exterior has been restyled by adding an extractor hood, mesh grille, shaved door handles and tinted windows. Finally the entire car will be hand sprayed in BASF’s Cyber Gray Metallic and accented with their Pearl Hot Pink. Finally it will be wet sanded and polished to a fine high luster using 3M refinishing products and tools.

Let’s talk horsepower! The folks at Victory Racing Engines have built their 408 cubic inch sportsman engine package topped with a Magnacharger supercharger for a little go to this show car . It will be coupled to a Finish Line 4l80e transmission, housing a Yank 3200 stall converter. Passionately Pink will be connecting those 500 ponies to the ground threw 20″ USW Forged “Crossover” wheels wrapped in Toyo Proxes rubber.

The sound stage is set for a 8 speaker, 1000w system by Kicker. It is made up of their RS 6.5" components, 10" CVR sub woofers and two DX amplifiers. All the sound held captive by Design Engineering Boom Mat that has been laid throughout the entire vehicle

[skatinjay27]

cool idea and cause. and the rendering looks pretty good i like how that wheels only have the pink as a accent color help to keep it from looking chezzy.
BUT and a big BUT i dont think all the hyped up word play is necessary for a lateral-g build thread....;)

[PPinkCamaro]

Fair enough.....:)

Here are our Monzter Motorsports pulleys.

[ProTour72]

Awesome design, great cause, this will one to watch!!:thumbsup:

[56pickup]

great idea and the design looks great! :thumbsup:
please post pics often! :yes:

[orangevert]

Thought I read it wrong? It going to be way bitchin......

[BBC71Nova]

This will be cool. Great idea.

A thrash as well with SEMA being a quick few months away :wow:

[PPinkCamaro]

The trash has officially begun....we have UPS and Fedex deliveries coming everyday with awesome new toys. With only 5 months for this build time is something we can not waste.



This will be cool. Great idea.

A thrash as well with SEMA being a quick few months away :wow:

[SAR Skipper]

...BUT and a big BUT i dont think all the hyped up word play is necessary for a lateral-g build thread....;)

I completely disagree.
The "wordplay" was very well written and certainly brought attention to both the detail and the cause :thumbsup: (too many words yet?:rofl: )

Seriously, if you can pull it off, it'll be great. I've subscribed and will watch closely.
As a member here who has had several close family members and friends stricken by breast cancer, I thank you for your efforts:cheers:

I know this will start a crap storm, but what about painting the whole damned car a cool shade of pink, not the pepto bismol pink, but one of the bright, "hot pink" colors, to bring attention to the cause, and then do the accents in black:thumbsup: ??

can't wait to see how this one comes out.
Again,

Thanks:thumbsup: :cheers:

[john royal]

I like the rendering as it is. I've seen plunty of pink cars with accents and they do nothing for me. This has perfect balance of color throughout the car.

[skatinjay27]

I completely disagree.
The "wordplay" was very well written and certainly brought attention to both the detail and the cause :thumbsup: (too many words yet?:rofl: )

"read closely" not necessary for a LATERAL-G BUILD THREAD...
its got nothing to do with the length of the post or the detailed description (if that was the case i'd have greg welds post on ignore! :rofl:)

but to answer your question YES, from you that is...:thumbsup:

[SAR Skipper]

"read closely" not necessary for a LATERAL-G BUILD THREAD...
its got nothing to do with the length of the post or the detailed description (if that was the case i'd have greg welds post on ignore! :rofl:)

but to answer your question YES, from you that is...:thumbsup:

I've already "read closely."
So what's "not necessary?"
Heck, most of the build threads start out with as much or more that this.
Maybe I misunderstood your meaning?
Please explain.:cheers:

[SAR Skipper]

I like the rendering as it is. I've seen plunty of pink cars with accents and they do nothing for me. This has perfect balance of color throughout the car.

Where you hanging out to see that many pink cars?:rofl:
Seriously though, I like the scheme as well.
It was just a thought to help accentuate and promote the purpose of the car.

[john royal]

I started out with imports ten years ago. Girls wanna build hot pink cars. Some are ok but others are tasteless

Where you hanging out to see that many pink cars?:rofl:
Seriously though, I like the scheme as well.
It was just a thought to help accentuate and promote the purpose of the car.

[SAR Skipper]

I started out with imports ten years ago. Girls wanna build hot pink cars. Some are ok but others are tasteless

Gotcha:thumbsup: :cheers:

[john royal]

Btw im building an import again. Can't wait to see some build pics of this Camaro! Gonna be sick.

[Streetwerkz]

Cool project, great cause.
Can't wait to see this one come together!

[70rs]

[ (if that was the case i'd have greg welds post on ignore! :rofl:) ]


LMAO!


Nice looking project. And for a great cause. Subscribed!

[PPinkCamaro]

The car before tear down.

[PPinkCamaro]

Digi-tails arrived today.

[awr68]

Great cause! I too have had family members deal with breast cancer...thanks for doing this!

Just a thought, if you ever plan on tracking the car you will need door handles.

[ProTour72]

Maybe the C6 style handle? That would be trick if it can be made to fit.

[PPinkCamaro]

Car is off to media blasting, and the UPS guy is working overtime. Received a steering column from Ididit, seat covers from Roadwire, gas tank from Rick's Stainless, air conditioning from Classic Auto Air, and door panels from Marques Design. So happy to see all these parts, but man there is a lot of work in the near future.

[PPinkCamaro]

It's like Christmas at the shop. More presents to unwrap from Painless, BMR, and Classic Industries.

[ProTour72]

This is coming together nicely cant wait to see pics of the car after media blasting.

[PPinkCamaro]

Mirrors are hear from Vision Hot Rod Concepts!!!

[PPinkCamaro]

We at Team Passionately Pink Camaro would like to thank Joe and the good folks at BMR Suspension. They have stepped up in a huge way by not only sending us their torque arm suspension kit (http://www.bmrsuspension.com/index.cfm?page=products&vehicleid=4&maincatid=29&catid=138&productid=537), a-arms (http://www.bmrsuspension.com/index.cfm?page=products&vehicleid=4&maincatid=29&catid=136) and sway bars but offering up a $500.00 donation to the Susan G. Komen Foundation when and if we compete in the Optima Challenge.:

This is a great example of a large company giving back to the community:thumbsup: .

[PPinkCamaro]

MPD Hood is coming together.

[PPinkCamaro]

Hood is almost ready.

[awr68]

The hood came out great! Thanks for sharing!

[BMR Tech]

We are definitely pleased to be a part of this build and thankful for Team Passionately Pink Camaro choosing BMR as their suspension of choice. With so many builds taking place each year it can be difficult choosing which ones to support. This build has great direction and a worthy cause. We are anxiously watching the car take shape and look forward to seeing it at the 2011 Sema Show.

[syborg tt]

Great Project and a Outstanding cause.

[PPinkCamaro]

Been super busy but here are a few pre-blasting pictures.

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110708-00197.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110708-00200.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110708-00193.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110708-00199.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110708-00192.jpg

[PPinkCamaro]

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110711-00222.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110711-00223.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110711-00224.jpg

[BMR Tech]

That's about as bare bones as it gets! Looks like you guys have been busy. Just wanted to post a few pics of your torque arm kit going together.

http://www.bmrsuspension.com/ForumImages/weld_1.JPG
http://www.bmrsuspension.com/ForumImages/weld_2.JPG
http://www.bmrsuspension.com/ForumImages/weld_3.JPG
http://www.bmrsuspension.com/ForumImages/weld_4.JPG

[ProTour72]

Wow!! That is so nice to see builds this up close and personal coming together:thumbsup:

[PPinkCamaro]

Putting the Human back in Humanity

With the current trend of “everyone for themselves” we have been fortunate enough to find many amazing companies that are will to put others first. We have partnered up with companies that aren’t worried about who else is on board the project and who might be a conflict of interest, but more about the greater good of the project. Without the large group of generous companies below the Passionately Pink Camaro built would not be a reality, and we would like to take a moment to thank all of you.


Airlift/ AGR Performance Steering/ ARP Fasteners/ Amsoil/ Adams Polishes/ Anvil Auto/ BRC Pistons/ BASF/ Borla/ BMR/ Borgeson/ Classic Industries/ Classic Auto Air/ Deatschwerks/ Design Engineering/ Dakota Digital/ Eye Kandy Design/ Finishline Transmission/ Fesler Built/ Flashtech,/Flex-a-lite/ Hydratech/ Ididit/ Kinetik/ Kore3/ Kicker/ KBS Coatings/ Motorsports Performance Design/ Monzter Motorsports/ Magnacharger/ Metrom Performance Products/ Marquez Design/ National Parts Depot/ Oracal/ Painless Wiring/ Rick's Stainless/ Roadwire/ Scat/ Spaghetti Engineering/ Toyo/ USW Forged/ Vision Hot Rod/ Victory Racing Engines/ Yank Convertors.

[coolwelder62]

Great project guy's.:thumbsup:

[PPinkCamaro]

Thanks. I will be in contact with you shortly regarding the lower dash piece.

Great project guy's.:thumbsup:

[PPinkCamaro]

http://i1107.photobucket.com/albums/h384/PPinkCamaro/Andrews_1972_Camaro_Final_03b.jpg

[mexMan]

The car is like, really cheesy, the motivation is like, really awesome, I'm happy to see there's still people caring about the others, it's not about publicity, it's not about gettin to be known by the other people, nothing like that, it's about doing what you, they, we, and anyone else thinks is right, not for myself, but for the people that surrounds me. I've heard everyone is connected by at least ''6 degrees of separation'' a chain of maximum 6 people, then let's think about it this way, we're meant to help anyone close to us, we're making our part of the difference, helping at least 15% of the people in the world.

Anyway, it's looking really cool, BMR, the torque arm building is awesome. I'd love to see it done.

[PPinkCamaro]

Here are some photos from after media blasting. We have a lot of work ahead of us.

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110726-00239.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110726-00240.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110726-00241.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110726-00242.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110726-00243.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110726-00244.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110726-00245.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110726-00246.jpg

[PPinkCamaro]

Self etched and mocking the suspension up.

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110727-00252.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110727-00253.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110727-00254.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/IMG-20110727-00255.jpg

[mexMan]

Hey cool subframe! What suspension components are you going to use?

[PPinkCamaro]

We are using BMR Fabrication's torque arm kit, a-arms, and sway bar with a custom Airlift Company bag setup.

[PPinkCamaro]

Kore3 Calipers are almost finished.


http://i1107.photobucket.com/albums/h384/PPinkCamaro/imagejpeg_kore3.jpg

[PPinkCamaro]

Making progress...........
http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09467.jpg

[skatinjay27]

those calipers are SWEET!

[DarkoNova]

Wow this looks like it'll be awesome when it's done. And those calipers look wicked. I think they'd look pretty awesome if they were painted pink behind those black wheels. :unibrow:

[GregWeld]

subscribed

Nice project. :thumbsup: :cheers:

[ProTour72]

Wow the project is coming along very nice, this is gonna be a beautiful piece at SEMA.

[BMR Tech]

Looking good!

[PPinkCamaro]

Installing more sheet metal from Classic Industries and National Parts Depot. Hopefully have everything hung by the end of the week, because the clock it ticking on our SEMA 2011 debut.


http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09472.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09476.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09475.jpg

[ProTour72]

That looks like it sits pretty low. So its going to be running The BMR torque arm kit and the AIRLIFT for the ride height? That looks great!:thumbsup:

[PPinkCamaro]

Making some progress on the lights.


http://i1107.photobucket.com/albums/h384/PPinkCamaro/photo43.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/photo35.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/photo26.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/photo15.jpg

[ProTour72]

Wow!! Those are definately one of a kind.

[70rs]

Where did those tail lights come from?

Nice work so far. :thumbsup:

[ProTour72]

Check out their website. www.passionatelypinkcamaro.com, a company named "Monzter Motorsports" built the tail lights, and the circuit board tail lights are Digi-tails, this car is coming along well, cant wait to see what else is cooking, I know Monzter is doing alot of the one-off billet work for the Passionately Pink Camaro,like billet grille, and a billet belt drive, along with Ring Brothers hindges, Marquez strikers door vents, door panels, and rear deck panel. Cant wait to see it at Sema!!

[PPinkCamaro]

All shined up thanks to The Polishing Shop.

http://i1107.photobucket.com/albums/h384/PPinkCamaro/imagejpeg_3.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/imagejpeg_256gh-1.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/imagejpeg_5fghu.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/imagejpeg_4ghwui.jpg

[waynieZ]

Wow those lights are like a sculpture. Nice job on the polishing.

[ProTour72]

The Polishing Shop did a great job on the Charger from Magna charger!! These guys awicked on the polishing work they do.

[PPinkCamaro]

....and more body work.

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09530.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09527.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09526.jpg

[BMR Tech]

Looks like it's coming along nicely. Looks like some shiny paint is right around the corner!

[PPinkCamaro]

sandin' the day away...

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09574.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09575.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09582.jpg

[syborg tt]

Car looks great - keep up the good work

[Z06Joe]

Awesome build!!! A very dear friend of mine has battled 3 bouts of breast cancer. Wish I lived close enough to help out so you could make your deadline. Can't wait to see it finished.

What are the plans for the car after SEMA???

[PPinkCamaro]

From SEMA we have a tour schedule with shows in Louisiana, Pennsylvania,Detroit and Chicago. We also plan on running in the Hot Rod Power Tour since it starts a mile from our shop. Also we have a breast cancer survivor piloting it in the Motorcity Gumball Rally in September. After all is said and done the vehicle will end of at Barrett Jackson with proceeds to benefit the Susan G. Komen Foundation.

[PPinkCamaro]

We are in booth #11749. Everyone please stop by and check it out.

[Z06Joe]

From SEMA we have a tour schedule with shows in Louisiana, Pennsylvania,Detroit and Chicago. We also plan on running in the Hot Rod Power Tour since it starts a mile from our shop. Also we have a breast cancer survivor piloting it in the Motorcity Gumball Rally in September. After all is said and done the vehicle will end of at Barrett Jackson with proceeds to benefit the Susan G. Komen Foundation.

I have to say again how cool of a build this is... I've wanted to do something like this but don't have the funds... Every year I do the Relay For Life and last year our theme was Racing for Pinks. This build brings a tear of joy to my eye friend!!! GREAT GREAT JOB :thumbsup:

I will definitely keep my out for it to roll across Barrett-Jackson. Where do you plan on auctioning it off at??

[PPinkCamaro]

........got the hood. One more piece of the puzzle complete.

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC03102.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC03101.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC03093.jpg

[PPinkCamaro]

Thanks to Robert Kibbie and The Musclecar Place for the interview.

http://www.themusclecarplace.com/the-musclecar-place-podcast-episode-102-the-passionately-pink-camaro

[PPinkCamaro]

Mocked up our stopping power.

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09641.jpg

New rear end components courtesy of Yukon Gear & Axle

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09653.jpg

Thanks Chris @ JCG for the use of this little gem. Made things a lot easier to measure up our Fikse wheels.

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09649.jpg

[syborg tt]

Car is looking fantastic.

and that little Gem from JCG is Awesome

Mocked up our stopping power.

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09641.jpg

New rear end components courtesy of Yukon Gear & Axle

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09653.jpg

Thanks Chris @ JCG for the use of this little gem. Made things a lot easier to measure up our Fikse wheels.

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09649.jpg

[PPinkCamaro]

KBS coated interior.

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09636.jpg

Thanks to Autoloc for sending a care package

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09654.jpg

Nothing like ridin' on Air!

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09655.jpg

[PPinkCamaro]

DEI Boom Mat installed
http://i1107.photobucket.com/albums/h384/PPinkCamaro/PPink036.jpg

Interior upholstery is coming together.
http://i1107.photobucket.com/albums/h384/PPinkCamaro/PPink058.jpg

Flattening out some interior pieces so they can be wrapped
http://i1107.photobucket.com/albums/h384/PPinkCamaro/PPink057.jpg

Hood finally is getting closer to fitting the way it needs to.
http://i1107.photobucket.com/albums/h384/PPinkCamaro/PPink060.jpg

[newguy101]

I really like the design of the hood, elegant but aggressive cant wait to see whats going on under it!

[214Chevy]

I like the hood too!! :thumbsup:

[PPinkCamaro]

Workin' on the interior

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09717.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09709-1.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09715.jpg

[PPinkCamaro]

BMR suspension back from powder coating. Special thanks to Bill and the guys at QC Coatings for doing another amazing job within our crazy time line.

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09728.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09727.jpg

[PPinkCamaro]

Transmission, torque converter and cooler are here.

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09794.jpg

[Apogee]

Woo-hoo! New parts. It's looking good. You should be receiving some 1-piece Hawk HP Plus pads for OUSCI shortly. Thanks again for the opportunity to participate in this project and provide the brakes for a great cause. I can't wait to see it at SEMA (booth #11749 in the North Hall).

Tobin
KORE3

[Apogee]

Check out their website. www.passionatelypinkcamaro.com, a company named "Monzter Motorsports" built the tail lights, and the circuit board tail lights are Digi-tails, this car is coming along well, cant wait to see what else is cooking, I know Monzter is doing alot of the one-off billet work for the Passionately Pink Camaro,like billet grille, and a billet belt drive, along with Ring Brothers hindges, Marquez strikers door vents, door panels, and rear deck panel. Cant wait to see it at Sema!!

Many thanks as well to Monzter Motorsports for the engraving work on the calipers. They came through in a pinch to give provide some of the details that make the car extra-special.

Tobin
KORE3

[Sled Alley]

The guys at Victory are doing a great job the car looks amazing in person:thumbsup:

[PPinkCamaro]

These calipers? :)

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09822.jpg

Many thanks as well to Monzter Motorsports for the engraving work on the calipers. They came through in a pinch to give provide some of the details that make the car extra-special.

Tobin
KORE3

[ProTour72]

That looks awesome!! Cant wait to see it at SEMA!

[PPinkCamaro]

Check the car out at booth 24651 in the Central Hall at the SEMA Show.

http://i1107.photobucket.com/albums/h384/PPinkCamaro/374818_2115232356561_1118274564_31754028_123656241 6_n.jpg

[GrabberGT]

Somebody PLEASE get over there with a REAL camera and take some decent picks. This car looks awesome. Love the hood.

[ProTour72]

WOW! The car looks great cant wait to see more pics.

On a side note, I am very shocked at how many people didnt comment on this build thread. The car wasunveiled yesterday, and posted here on Lateral G yesterday and one person commented. Kinda sad if you look at it. I guess its not as important as Bill Goldberg building a car, but Id personally like to send a shout out to everyone involved in this build. You guys went over and beyond to build a tribute car for our Mothers, daughters, and friends who battled the rigors of fighting breastcancer. Its people like Victory Racing Engines, National Parts Depot, Classic Industries, and all of the other Passionately Pink Camaro's 69 sponsors that are the true Pioneers of what this country was once made of, and what we lack as a whole today in the modern America.....Integrity..and Heart. Not the all mighty Buck!

Heres to all of these guys..........Thank you!

[70rs]

WOW! The car looks great cant wait to see more pics.

On a side note, I am very shocked at how many people didnt comment on this build thread. The car wasunveiled yesterday, and posted here on Lateral G yesterday and one person commented. Kinda sad if you look at it. I guess its not as important as Bill Goldberg building a car, but Id personally like to send a shout out to everyone involved in this build. You guys went over and beyond to build a tribute car for our Mothers, daughters, and friends who battled the rigors of fighting breastcancer. Its people like Victory Racing Engines, National Parts Depot, Classic Industries, and all of the other Passionately Pink Camaro's 69 sponsors that are the true Pioneers of what this country was once made of, and what we lack as a whole today in the modern America.....Integrity..and Heart. Not the all mighty Buck!

Heres to all of these guys..........Thank you!



There are alot more ” views” than posts. I know I personally followed the build on three different sites. I only posted replies or comments on this site.
I guess my point is that many, many people watched the build. And I have to believe that anyone who is aware of it believes in the cause.
The builders, sponsors and anyone else involved has done a great job and for a great cause. The car turned out great.

[Z06Joe]

Where is the unveil thread?? I absolutely love this build/project!! It has a lot of meaning to me.

[ProTour72]

http://i1107.photobucket.com/albums/h384/PPinkCamaro/6ad0f7e3.jpg
http://i1107.photobucket.com/albums/h384/PPinkCamaro/1017cd68.jpg
http://i1107.photobucket.com/albums/h384/PPinkCamaro/a055b65f.jpg
http://i1107.photobucket.com/albums/h384/PPinkCamaro/7edcf3a5.jpg
http://i1107.photobucket.com/albums/h384/PPinkCamaro/1dc97bb6.jpg
http://i1107.photobucket.com/albums/h384/PPinkCamaro/59a9e653.jpg
http://i1107.photobucket.com/albums/h384/PPinkCamaro/7f052468.jpg
http://i1107.photobucket.com/albums/h384/PPinkCamaro/85a7ecbb.jpg
http://i1107.photobucket.com/albums/h384/PPinkCamaro/091fee42.jpg
http://i1107.photobucket.com/albums/h384/PPinkCamaro/3f467287.jpg
http://i1107.photobucket.com/albums/h384/PPinkCamaro/ed24f53f.jpg
http://i1107.photobucket.com/albums/h384/PPinkCamaro/27d9fbe0.jpg
http://i1107.photobucket.com/albums/h384/PPinkCamaro/eccae644.jpg
http://i1107.photobucket.com/albums/h384/PPinkCamaro/0e4ba4ad.jpg

[GrabberGT]

Looks awesome. The seats are are a little too retro for me though. Those headlights are pretty trick looking.

[Swain]

Wounder what happened to the steering wheel we donated for this project? :_paranoid

[BMR Tech]

Great job guys! The car looks fantastic!

[ProTour72]

Great job guys! The car looks fantastic!

How bout that BMR Torque arm kit in pink? Looks killer!!!

:lateral:

[bonecrrusher]

What color paint is the body?

[ProTour72]

Looks awesome. The seats are are a little too retro for me though. Those headlights are pretty trick looking.

The car was built with "newstalsia" in mind the seats are actually Corbeau seats that were shaped to look similar to the old style but with more bolster like a racing seat, but these seat recline and go up and down. Oh yea, and they have seat heaters and messagers front and rear!! :thumbsup:

[ProTour72]

What color paint is the body?

It's the 2011 chevy camaro Cyber Grey Metallic (CGM) really pretty in person!

[Z06Joe]

Love it!!! It really turned out great!!!

[PPinkCamaro]

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC_3601.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC_3596-1573303562-W.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC_3594-1573303583-W.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC_3582-1573302776-W.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC_3572-1573297480-W.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC_3570-1573294830-W.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC_3557-1573291413-W.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC_3550-1573293313-W.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC_3542-1573288731-W.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC_0036-1573180132-W.jpg

[Cris@JCG]

I need a little help here guys… I let Andy borrow my wheel simulator back in August of 2011 for his project.. I saw no harm in boxing it up & shipping it out to him so that they could do their wheels..
I have been calling Andy for the last couple of months asking him to send it back because I really need this tool back.. I have been super cool about the whole situation & very patient.. but enough is enough.. It was suppose to be shipped out about two weeks ago & he was suppose to get me a tracking #... Never called me back… Called him this week.. no answer & leaving messages..

I might have not sponsored any parts to the project.. but I let him borrow a very valuable tool to my shop.. It took a lot for me to do this post.. but don’t know what else to do..

I have been asked by various member here to see if they can borrow or rent this tool.. & all I can say is .. First I need to get it back..





Thanks Chris @ JCG for the use of this little gem. Made things a lot easier to measure up our Fikse wheels.

http://i1107.photobucket.com/albums/h384/PPinkCamaro/DSC09649.jpg[/QUOTE]

[214Chevy]

Hot damn!!! I lost track of this thread and oooooh weeeee....this car is amazing. :yes: :yes: Craftsmenship is flawless.:thumbsup: :thumbsup:

[GregWeld]

I need a little help here guys… I let Andy borrow my wheel simulator back in August of 2011 for his project.. I saw no harm in boxing it up & shipping it out to him so that they could do their wheels..
I have been calling Andy for the last couple of months asking him to send it back because I really need this tool back.. I have been super cool about the whole situation & very patient.. but enough is enough.. It was suppose to be shipped out about two weeks ago & he was suppose to get me a tracking #... Never called me back… Called him this week.. no answer & leaving messages..

I might have not sponsored any parts to the project.. but I let him borrow a very valuable tool to my shop.. It took a lot for me to do this post.. but don’t know what else to do..

I have been asked by various member here to see if they can borrow or rent this tool.. & all I can say is .. First I need to get it back..


I'd have more to say but don't want to get into trouble with the MODS...

HOW SAD THAT A MAN (used lightly) CAN'T KEEP HIS WORD.

[214Chevy]

....HOW SAD THAT A MAN (used lightly) CAN'T KEEP HIS WORD.

Well stated Greg. I may want to borrow this tool one day and that may be compromised by the actions of another person. If a "MAN" doesn't have nothing else in life, it should be his word. We have a wonderful family here. I was once offered to be loaned some C6 spindles by SoCal Ron. I have never met him personally, but have had several personal phone conversations with him and talk to him about car advice often. Ron offered to loan me his brand new spindles for my project on one condition...that I return them and I gave him my WORD.

[KPC67]

Well stated Greg. I may want to borrow this tool one day and that may be compromised by the actions of another person. If a "MAN" doesn't have nothing else in life, it should be his word.

I'd have more to say but don't want to get into trouble with the MODS...

HOW SAD THAT A MAN (used lightly) CAN'T KEEP HIS WORD.

I don't really want to get into this either but I feel for you Cris! So here is to hoping this gets resolved, and you get your tool back.
I guess if you are to ever lend it out again a refundable deposit (for what the tool is worth; or maybe even a little more) is in order.

[Cris@JCG]

Just to let you guys know.. I got my wheel simulator back..

[cencalc6]

Just to let you guys know.. I got my wheel simulator back..

:thumbsup:

[214Chevy]

Just to let you guys know.. I got my wheel simulator back..

Hip hip hooray!!!!!:woot:

[DOOM]

Cris what ever you do don't borrow that tool to any more knuckle heads!:D

[coolwelder62]

Was it sent back too you Freight Collect (F.O.B.).:willy:

[DOOM]

Was it sent back too you Freight Collect (F.O.B.).:willy:

Cris had the tool sent to me. I was actually going to drive out to Detroit to get it for him. Sad part about it when I opened up the box it was apart missing several of the mounting bolts WTF!!!! Cris is a class act that will help anyone! Its hard to find people like this today!

[GregWeld]

Cris had the tool sent to me. I was actually going to drive out to Detroit to get it for him. Sad part about it when I opened up the box it was apart missing several of the mounting bolts WTF!!!! Cris is a class act that will help anyone! Its hard to find people like this today!



Sadly - it's a whole lot easier to "find" the DB's (like this borrower) that don't hold up their part of the bargain.

INMO -- this ONE SINGLE ACT (not returning the tool when asked) ruined this thread and what the car could have stood for. Because now, whenever I see this car, I see a bad actor rather than the good cause.

[DOOM]

Sadly - it's a whole lot easier to "find" the DB's (like this borrower) that don't hold up their part of the bargain.

INMO -- this ONE SINGLE ACT (not returning the tool when asked) ruined this thread and what the car could have stood for. Because now, whenever I see this car, I see a bad actor rather than the good cause.

EXACTLY!!!!!!

[Ron in SoCal]

WTH !??! The guy goes out and builds a car for charity, asks for FREE SH~T to make it happen, and then soils his pants with his actions....:(

[PPinkCamaro]

Pictures for the Lingenfelter open house to support breast cancer research.

http://i1107.photobucket.com/albums/h384/PPinkCamaro/521336_372120472850831_923772383_n.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/306957_372120896184122_147026802026867_1052419_186 5217911_n.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/599346_372120959517449_428728277_n.jpg

[PPinkCamaro]

http://i29.photobucket.com/albums/c255/victoryracing2005/DSC8759-M.jpg

http://i29.photobucket.com/albums/c255/victoryracing2005/DSC8758-M.jpg

http://i29.photobucket.com/albums/c255/victoryracing2005/DSC8723-M.jpg

http://i29.photobucket.com/albums/c255/victoryracing2005/DSC8760-S.jpg

[PPinkCamaro]

http://i1107.photobucket.com/albums/h384/PPinkCamaro/556980_329331787153429_1733749402_n.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/531691_329331467153461_683478701_n.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/209010_329331490486792_1252892691_n.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/527932_329331607153447_1676341305_n.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/482143_329331540486787_762773927_n.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/208923_329331713820103_1359748538_n.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/578645_329331743820100_1427753955_n.jpg

http://i1107.photobucket.com/albums/h384/PPinkCamaro/552691_329331573820117_1471063453_n.jpg

[MarkM66]

Will the proceeds go to the charity?

http://www.mecum.com/auctions/lot_detail.cfm?LOT_ID=DA0912-136059