67-68 rear body panel (gas cap location only)

[jschaecher]

I need the part of the rear body panel from a 67-68 Camaro where the gas cap attaches. I was going to build one, but I thought I would see if anyone replaced their rear body panel and has an old one kicking around that they could cut the gas cap section out of. Here's a link to a classic industries one that shows the area I talking about. Thanks in advance.

http://api.viglink.com/api/click?format=go&key=7cfbf804afc0478a813594482008cf3b&loc=http%3A%2F%2Fwww.pro-touring.com%2Fshowthread.php%3F64056-Need-67-68-Camaro-sheet-metal-where-gas-cap-goes%26highlight%3Dgas%2Bcap&v=1&libid=1305745989017&out=http%3A%2F%2Fwww.classicindustries.com%2Fcontr oller.cfm%3Ftype%3Dproduct%26action%3DproductDetai l%26productId%3D83145%26productSearchCatalogId%3D1&ref=http%3A%2F%2Fwww.pro-touring.com%2Fsearch.php%3Fsearchid%3D525414&title=Need%2067-68%20Camaro%20sheet%20metal%20where%20gas%20cap%20 goes&txt=http%3A%2F%2Fwww.classicindustries.com%2Fcon.. .rchCatalogId%3D1

Jordan
785-969-8822

[jschaecher]

Jeff I actually need to because i'm moving the fuel filler to the tail panel in my 72 nova. I can make a panel just thougth i would try to see if someone had one laying around. wish i would have caught you before it went to scrap!

Another option is to smooth the panel flat and change the location of the gas cap location to behind the license plate. That is what was done on my 67 RS Camaro and I think it looks lot better. Also keeps the fumes out of the trunk. Anyway, that section of mine went into the scrap bin. Typically the rear panel is in bad shape on the 67-68 Camaros. I seen a better rear panel than the Taiwan repro, but it was on Heartbeat City website. I think American Metal Direct makes the rear panel now.

Jeff

[SlowProgress]

Did you find one yet. I just cut the lower half off one this weekend and I won't be using the top part where the tail lights and gas cap go. It is a reproduction panel, not original.

Scott