Tig69SS
01-24-2006, 08:21 AM
My name is Tig and live in St. Petersburg, Florida.
I found my project car in the back of a body shop that was redoing my '83 CJ7 Laredo. It had been sitting there for a couple of years under dust. I moved it across the street to another body shop, GM Muscle. There..the project began. It was already stripped to bare metal...chemically, but we went ahead and had it media blasted. There was a good amount of rust..but luckily the rust was in all the RIGHT places. Since then we have replaced all...i repeat ALL the sheetmetal...minus the roof and firewall. We went with the new one piece floor, full quarters, fenders, complete doors, tailpan, trunkpan, trunk lid and hood. We POR15 the inside of the floors..and the bottom of the inside of the doors...and Rhino lined the complete bottom of the car. Atm they are working on the gaps. Next it will go to paint. We are painting her Mitsubishi Sunset Pearl...with a white pearl bumble bee stripe.
I have a 425hp 350 sitting, waiting to go in, with an additional 100 shot NOS system. I also went with a TH700r4. The camaro had a 12 bolt posi rearend with 411 gears...so we are going to keep that. I am still deciding on whether or not to put the factory seats back in. I have the original seats...and they are in almost excellent condition. But, GM Muscle has a set of 4th gen seats and console, we may end up going with.
We are going to use the Guldstrand mod for the front suspension, till i can afford something better. I purchased the taillights, side markers and indicator lights from Marquez Design..and i purchased the 6speed windshield wiper motor from DSE..and i cant wait to see them on my beast. As soon as i figure out how to post pictures...i'll post them
Tig69SS
I found my project car in the back of a body shop that was redoing my '83 CJ7 Laredo. It had been sitting there for a couple of years under dust. I moved it across the street to another body shop, GM Muscle. There..the project began. It was already stripped to bare metal...chemically, but we went ahead and had it media blasted. There was a good amount of rust..but luckily the rust was in all the RIGHT places. Since then we have replaced all...i repeat ALL the sheetmetal...minus the roof and firewall. We went with the new one piece floor, full quarters, fenders, complete doors, tailpan, trunkpan, trunk lid and hood. We POR15 the inside of the floors..and the bottom of the inside of the doors...and Rhino lined the complete bottom of the car. Atm they are working on the gaps. Next it will go to paint. We are painting her Mitsubishi Sunset Pearl...with a white pearl bumble bee stripe.
I have a 425hp 350 sitting, waiting to go in, with an additional 100 shot NOS system. I also went with a TH700r4. The camaro had a 12 bolt posi rearend with 411 gears...so we are going to keep that. I am still deciding on whether or not to put the factory seats back in. I have the original seats...and they are in almost excellent condition. But, GM Muscle has a set of 4th gen seats and console, we may end up going with.
We are going to use the Guldstrand mod for the front suspension, till i can afford something better. I purchased the taillights, side markers and indicator lights from Marquez Design..and i purchased the 6speed windshield wiper motor from DSE..and i cant wait to see them on my beast. As soon as i figure out how to post pictures...i'll post them
Tig69SS