Cleaning the garage (Budnik wheels, 69 suspensions parts, etc)

[TrialRun]

*****All parts were sold locally as a package, please close thread*****

All the parts are located in San Antonio, TX. Here is a list of the parts that I purchased for my 69 camaro and will not be using as I'm running the Jakes Rod Shop front subframe setup, these are the actual cost I paid and have receipts for everything. If you want i'll take 25% off my cost or best offer:

New Parts

Helix upper control arms $315
Helix lower control arms $315
Shipping $65
Total $695

Front springs $150 + $20 shipping (hotchkis)

Hotchkis Front sway bar $185 + $35 shipping

Airride Tall drop spindles $300 + $25 shipping

Front shocks Chris Alston Engineering (Varishocks) $300 + 15 shipping

GM SS Hub Kore3 adapter for the C6 brakes $299

Budnik wheels and tires - new, just used for mockup 18x8.5 front 18x11.5 rear (purchased from Felser off this site) $2200

Used

4 Corvette z06 tires $300
3700 miles Goodyear Eagle 1 GS2 EMT Runflat
285/35ZR19 Rear
245/40ZR18 Front

The stock subframe, front and rear suspension and brakes - best offer

Give me a ring if your interested 210-313-2117

-Chris

[JaySB]

Can you post the part # for the varishocks and springs please?

[Roberts68]

Hmmmm...Budnik sure makes a lot of different wheel styles don't they?
:ttiwop:
GLWS :thumbsup:

[awake1630]

pics of the control arms please

[greycamaro]

GM SS Hub Kore3 adapter for the C6 brakes $299
interested in these and the wheels.
please post pic.

[TrialRun]

Can you post the part # for the varishocks and springs please?

Jay, I'm currently in the Midwest helping out with the tornado relief for the insurance company I work for, but will be flying home on the 24th. I'll get all the specifics then, I'll also shoot Frank @ prodigy an email to see if he still has that on file, since they were purchased from him. I don't remember off hand, but they were recommended by Frank for a pro-touring set up.

[TrialRun]

pics of the control arms please

I'll get you actual photos when I fly home on the 24th or if your in the San Antonio area my builder has a key to the storage unit and can let you check them out.

I tried to go onto their website www.helixsuspension.com they don't have a pic for that model year, but they look just like the one on their homepage when you click on control arms.

[TrialRun]

I'll get some more photos of the wheels and tires in my storage unit when I get back, I was able to find some pics from when I purchased them from Chris Fesler a while back. They were used for mockup by Chris, however i've never even put them on my car as the tubs have not been installed.

https://lh3.googleusercontent.com/_6kMp4eETmOA/TcMMillp2mI/AAAAAAAAABU/fPIlmCdL66s/s720/untitled.jpg

https://lh4.googleusercontent.com/_6kMp4eETmOA/TcMMs_oho8I/AAAAAAAAABY/W_x1XAx-beY/s720/2.jpg

https://lh4.googleusercontent.com/_6kMp4eETmOA/TcMNLxVpr3I/AAAAAAAAABc/zFQQlQKb_Ks/s720/3.jpg

https://lh5.googleusercontent.com/_6kMp4eETmOA/TcMNi2V62bI/AAAAAAAAABg/VV-HMalH8FI/s720/4.jpg

https://lh4.googleusercontent.com/_6kMp4eETmOA/TcMODFo0VfI/AAAAAAAAABk/9bJgQ1EmEcg/s720/5.jpg

https://lh6.googleusercontent.com/_6kMp4eETmOA/TcMOUhM8D7I/AAAAAAAAABo/AvY_9b9XIFc/s720/6.jpg

[kush69]

Interested in the swaybar and shocks left a message on the number you posted Thanks

[TrialRun]

Due to the high interest in the wheels, I had a friend go by and get the specs, he also took some photos, however the resolution was set pretty high, so it would be best to email. I will be home on Tuesday to get additional photos and can start packing up all the items pending sale.

FT TIRE 245/35ZR18 REAR 315/30ZR18 MICHELIN PILOT SPORT WHEEL ARE BUDNIK FT 8 1/2 WITH 5IN BACK SPACE REAR 11 1/2 WITH 7 1/2 IN BACK SPACE

Thanks guys! :lateral:

-Chris

[TrialRun]

Sorry for the delay....on to the pics


https://lh3.googleusercontent.com/-bArgK_-Wng4/TePmyfwSSBI/AAAAAAAAACw/RqMYrKqO3Lk/IMG_0085.JPG

https://lh3.googleusercontent.com/-d1BU7cSdVwM/TePmymm10WI/AAAAAAAAAC0/aQDbKugmFfI/IMG_0108.JPG

https://lh6.googleusercontent.com/-lf7dUG-yXoM/TePmy2vvnEI/AAAAAAAAAC8/SHO-1gSxtsk/IMG_0087.JPG

https://lh4.googleusercontent.com/-45K8rNBKcLw/TePmzLOYyBI/AAAAAAAAADE/WV1Yg2f-cYs/IMG_0090.JPG

https://lh4.googleusercontent.com/-G0UKiWn8xmM/TePmzVOHo4I/AAAAAAAAADI/bTaeBpzq3ws/IMG_0089.JPG

[TrialRun]

https://lh6.googleusercontent.com/-nj2KM8P6s0I/TePmzk9Ii7I/AAAAAAAAADM/hG0UkUvAu8Q/IMG_0092.JPG

https://lh5.googleusercontent.com/-TSaIvu_TiQs/TePmzqGjUbI/AAAAAAAAADU/qGeUjKucSRw/IMG_0094.JPG

https://lh3.googleusercontent.com/-tDfpwGn8j0U/TePmzxYYusI/AAAAAAAAADY/JSwoqPoTubs/IMG_0095.JPG

https://lh6.googleusercontent.com/-a8yPMyEW-_U/TePm0T0lsYI/AAAAAAAAADg/PBPVi2kGm_s/IMG_0098.JPG

https://lh5.googleusercontent.com/-P5ErMVlu1Q0/TePm0cR0AOI/AAAAAAAAADk/JEvm9kHP2iI/IMG_0096.JPG

[TrialRun]

https://lh3.googleusercontent.com/-cLdlPxlFtWc/TePm0nE5pmI/AAAAAAAAADo/upuPhd8odMU/IMG_0099.JPG

https://lh4.googleusercontent.com/-5lYcvpbAI4k/TePm00-FK9I/AAAAAAAAADs/PaRnfhmjYyA/IMG_0100.JPG

https://lh4.googleusercontent.com/-3s_mo5cXzO8/TePm0w9ZBDI/AAAAAAAAADw/uU154FC9OR8/IMG_0101.JPG

https://lh4.googleusercontent.com/-3GKodT3H690/TePm1NK46QI/AAAAAAAAAD0/k_SyZjElTEI/IMG_0102.JPG

https://lh4.googleusercontent.com/-KLSUdd3Ro2c/TePm1blLLXI/AAAAAAAAAD4/5mErbKMr6-U/IMG_0103.JPG

https://lh6.googleusercontent.com/-7ZQ0b_f9l3o/TePm1rUIRkI/AAAAAAAAAD8/uU9U2zubTus/IMG_0104.JPG

[TrialRun]

https://lh3.googleusercontent.com/-0bHj_iOOWME/TePm1rNxwmI/AAAAAAAAAEA/o5VS1fsdFVI/IMG_0105.JPG

https://lh3.googleusercontent.com/-DXBS_PxBu7w/TePm104gZ8I/AAAAAAAAAEE/doVoZdGcRbQ/IMG_0107.JPG

https://lh5.googleusercontent.com/-wbsSJeVMR2A/TePm1-kCk0I/AAAAAAAAAEI/2tlkU62HTjY/IMG_0106.JPG

https://lh5.googleusercontent.com/-wbsSJeVMR2A/TePm1-kCk0I/AAAAAAAAAEI/2tlkU62HTjY/IMG_0106.JPG

[talwell]

Are the Budniks still available? Do the rears require mini tubs?

[TrialRun]

yep, still for sale...2k takes them. The rears are 11" wide, would need to be mini-tubbed.

[jeremy30thz]

I'm interested in some of the parts for sale please contact me at
[email protected]

[TrialRun]

Sorry I sold all the parts locally. I will be listing a Jakes Rod Shop front subframe and kore3 C6 brake package in the next fews days as I'm putting the project on hold for now.

Chris