steve da wrench
04-19-2011, 10:20 PM
I have a brand new front brake kit for sale.
The entire kit was from Precision Brakes Company (also called Revolution Brake, LLC). http://www.revolutionbrake.com/
They don't have this exact kit listed anymore, but a similar kit is part #14-GM-0032. Thats as close as you can get in the currently listed kits, but I don't think its the correct part number. I dont know the mm conversion, but these are 14 inch x 1.25 inch thick.and lists for $2,771.50
http://www.revolutionbrake.com/files/CamaroProductionKits11-07.pdf
The Wilwood pads are #15Q-6829K 7420Q
The Wilwood calipers are # 120-6584-RS & 120-6585-RS
The wheel bearings are Car Quest # A-6 & A-2, and the seals are #8871
The rotor hats are Precision Brakes #8-700-01 and are aluminum. I am not sure who made the rotors, but I am thinking Wilwood.
The hubs are billet aluminum, and are made by Precision brakes.
Everything is brand new, I just mocked it up on my car once, but they were never driven, and never even had brake hoses attatched, or fluid in them.
The kit was made for a second gen Camaro on stock spindles, but could probably be used on other stuff. I know Kore3 makes adapter kits for conversions, and probably makes one that would work for this kit too.
I am asking $1,500.00, plus shipping.
Feel free to respond in this thread, but also email me if you are interested, as I am not sure how often I will check this thread! :)
[email protected]
The entire kit was from Precision Brakes Company (also called Revolution Brake, LLC). http://www.revolutionbrake.com/
They don't have this exact kit listed anymore, but a similar kit is part #14-GM-0032. Thats as close as you can get in the currently listed kits, but I don't think its the correct part number. I dont know the mm conversion, but these are 14 inch x 1.25 inch thick.and lists for $2,771.50
http://www.revolutionbrake.com/files/CamaroProductionKits11-07.pdf
The Wilwood pads are #15Q-6829K 7420Q
The Wilwood calipers are # 120-6584-RS & 120-6585-RS
The wheel bearings are Car Quest # A-6 & A-2, and the seals are #8871
The rotor hats are Precision Brakes #8-700-01 and are aluminum. I am not sure who made the rotors, but I am thinking Wilwood.
The hubs are billet aluminum, and are made by Precision brakes.
Everything is brand new, I just mocked it up on my car once, but they were never driven, and never even had brake hoses attatched, or fluid in them.
The kit was made for a second gen Camaro on stock spindles, but could probably be used on other stuff. I know Kore3 makes adapter kits for conversions, and probably makes one that would work for this kit too.
I am asking $1,500.00, plus shipping.
Feel free to respond in this thread, but also email me if you are interested, as I am not sure how often I will check this thread! :)
[email protected]