QA1 ride height difference

[fast400]

I just installed a QA1 coilover setup in my 69 Firebird. I ensured that both sides were exactly 5 threads up from the bottom of the shock as a starting point.
The problem is that the R side is almost 1/2" lower than the L side when I measure.
What could cause this??
Before I adjust to correct the height difference...will it negatively affect things if the right is up 8 threads from the bottom and the L only 5 threads??

[Blake Foster]

was it correct prior to installing the QA1's?

make sure the spring is seated correctly up inside the top pocket on the sub frame. that will do it.
there is a tapered pocket for the spring up in there.

[fast400]

It was perfect before. The springs are correctly seated too...that was my first thought

[67Rally]

Forgive my ignorance (especially on a first post), but isn't one of the benefits of the adjustable coilovers that you can even out small differences in ride height from one side to the next?

[bret]

Switch the springs from side to side to see if the problem is the spring or the car. It is possible that an inexpensive spring could vary in height and/or load capacity by that much.

[sanman]

Switch the springs from side to side to see if the problem is the spring or the car. It is possible that an inexpensive spring could vary in height and/or load capacity by that much.

Bret,
I see your quality responses on several boards, You the MAN. I am sure I speak for many. Its great to see someone who is not only running a big business but also taking the time to help those with questions. Keep it up you have proven yourself to me to a genuine dude!!!:cheers: