HPI Customs : Chevelle Frames and projects

[64pontiac]

We recently started a whole bunch of chevelles. The count is up to two 67 chevelles and 3 70's!

For two of the 70 chevelles, we are using stock chassis with Speedtech Road Assault Suspension packages. On top of that, we developed a k-member system that we are now installing in all our customers chevelles that aren't getting a custom frame, and even using a tweaked version for our custom frames! It consists of :
a tubular k brace
frame boxing
total front-to-back factory seam re weld
Body mount reinforcement and billet body mount set
exhaust/driveshaft crossmember
trans mount system.

Our trans mount is slotted to accept LS/SBC/BBC with any GM auto, t56, t5, or tko trans!

[64pontiac]

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/70chevelleframe2.jpg

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/70chevelleframe1.jpg

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/IMG_2869.jpg

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/frame1.jpg

[64pontiac]

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/crossmember2.jpg

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/exhaustcrossmember.jpg

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/transmountsystem.jpg

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/IMG_3261.jpg

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/IMG_3262.jpg

We integrate exhaust hanger holes into the crossmembers and then use our laser cut stainless tabs and rubber grommets to isolate the exhaust.

[64pontiac]

This is a 70 chevelle that we are doing a bit more "drag race". Typical 4 link/wishbone/anti-roll bar combo with a Dart big block up front, lemons headers, and we are doing a 3.5 inch exhaust. Used our chevelle k brace system and tweaked it for the back half style chassis.

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/jeff70chevelle1.jpg

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/IMG_3335.jpg

[ChevelleNV]

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/frame1.jpg

Nice work, very similar to what I am doing to my 72 frame.

[64pontiac]

I checked out your build thread Greg, nice car! I like the rendering, especially the black bumpers. Are those Boze stingers? I have the same rims going on my own car.

Cool stuff

[Bryce]

Great looking stuff!

[214Chevy]

Nice...very nice!! :hail:

[ChevelleNV]

I checked out your build thread Greg, nice car! I like the rendering, especially the black bumpers. Are those Boze stingers? I have the same rims going on my own car.

Cool stuff

Thanks, still a work in progress. the wheels are actually Boze Hi Octane's. but I may end up with something else that Frank @ prodigy recommended to me. but it will look similar.

[ChevelleNV]

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/transmountsystem.jpg

We integrate exhaust hanger holes into the crossmembers and then use our laser cut stainless tabs and rubber grommets to isolate the exhaust.

Two questions, what size tube are you using on the outer tubes and how much would you want for a set of the slotted tabs?

[64pontiac]

The tubing is 1 5/8.

[tones2SS]

Looks great Tyler. Looks very stout.

[waynieZ]

Nice work it looks great.

[coolwelder62]

Very nice work.:thumbsup: Scott

[64pontiac]

Here is what is going on top of one of the first two frames...... another body to follow after this one! Its the first Dynacorn Chevelle in Manitoba, one of the first in Canada. Any one else using one of these State side yet?

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/smallchevelle.jpg

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/small1.jpg

[waynieZ]

I didn't even know they were making them. Is it mini tubbed?

[64pontiac]

They aren't minitubbed as they are designed to drop onto stock frames..... but you can run a 305 and possibly a 315 under a 70.......

[214Chevy]

I didn't even know they were making them......

Neither did I....sweet!! :willy: :willy:

[64pontiac]

Yes they have them in convertibles too!

This is one of two we are going to be doing. More to come later!!!

[Addicted]

Im trying to order one but shipping through UPS is CRAZY. Any one have any freight shipping companys out there, as i pretty sure the box weighs less then 50 lbs........


Really would like to order a 'kit' like this and the rotisserie just arrived so im getting ancy.

[Addicted]

Umm somebody has to know something? I would like this kit but can not get a shipping quote.... Any where else that I can get something similar?

[64pontiac]

I have been away for a week, sorry for not posting! I got some pics of these frames powdered and assembled now too.

[ChevelleNV]

I have been away for a week, sorry for not posting! I got some pics of these frames powdered and assembled now too.

Well, lets see them...

also did you get my PM?

[64pontiac]

Ok heres the version 1 frame. We have been doing all our stuff in a slightly metallic gunmetal, its a nice contrast with the stainless exhaust and black speedtech stuff on it!
The lights are off in the shop now, otherwise I would have put a pic up with the exhaust and suspension on.


http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/framepowdered.jpg

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/framepowdered2.jpg

We are just finishing up our rear trailing arm braces and billet body mount set too!

[64pontiac]

Heres an update, the exhaust is Dynatech 3 inch stainless. we used a set of their 2 1/8 headers for it, but they aren't for a chevelle so the frame had some serious massaging for it.

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/IMG_3663.jpg

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/IMG_3665.jpg

[Addicted]

Sent PM. Cash burning whole.......:fire:

[clu269]

Sent PM. Cash burning whole.......:fire:

X2 on that Addicted!!!

[64pontiac]

Trying to get on top of it!! Sent some pms.....

[Blake Foster]

all looks good keep it comming

[bart0510]

http://i248.photobucket.com/albums/gg186/bart0510/frame1.jpg
Please PM me a price on all parts to do this to my '71. Thanks

[bulldogchevy]

Looking for kit for 1964 chevelle PM price and shipping to 01749

Thanks

Need ASAP

[ShadowGrayGuy]

Looks like Tyler & Dawn @ HPI have stumbled into a whole BUNCH of potential orders - I've been corresponding with them via email and will be purchasing their chassis materials for my '70 Chevelle as soon as we can iron out the details. I call "dibs" on the next shipment with the adjustable trans mount cross member!

Rob

[64pontiac]

you are correct!

Just finishing up the first batch today. Thanks for being patient!

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/IMG_37392.jpg

[waynieZ]

Those are some nice looking parts.

[Addicted]

Sent Pm's to email....

[ShadowGrayGuy]

Got my frame all ready for the new hardware...

http://i1216.photobucket.com/albums/dd364/linkewrc/2011-03-17_13-01-23_702.jpg

[64pontiac]

Nice! What engine/trans are you using?

[BanditDave]

OK...so I am going to need one of these frames for a '69 A body please?

[93Polo]

http://i248.photobucket.com/albums/gg186/bart0510/frame1.jpg
Please PM me a price on all parts to do this to my '71. Thanks

Same here on a 70 :cool:

[bart0510]

Here is what I have done with my '71 Chevelle frame so far but I think it is still missing something! Definitely needs one of Tyler's kits. Tyler thanks for all the info I will let you know shortly what I have decided. Too bad I already painted the frame, oh well that's what happens when project take too long--- more cool parts become available! Nice work Tyler!:thumbsup:

PICS
http://i248.photobucket.com/albums/gg186/bart0510/chevelle%20resto/chevelle%20frame%20resto/P1000887.jpg
http://i248.photobucket.com/albums/gg186/bart0510/chevelle%20resto/chevelle%20frame%20resto/P1000888.jpg
http://i248.photobucket.com/albums/gg186/bart0510/chevelle%20resto/chevelle%20frame%20resto/P1010016.jpg

[64pontiac]

Hey your off to a great start! Reinforced your rear suspension and welded all the factory seams and boxed her up!

Nice

[ChevelleNV]

Tyler your private message box is full (that's a good sign I take it). I left a message with your girl the other day, haven't heard back from you.

I left my number with the girl who answered the phone its the 775 area code one from Greg.

[mrgm]

is this about the same frame as the cutlass?

[64pontiac]

Yes sir it is the same as a cutlass

[clu269]

Tyler,
When can I expect to have my kit shipped. Your email said Thursday but I have not heard back yet. My cross member has not been located. The striate version should work. My cross member will be located just in front of the link mounts. It will be narrowed 2" per side to accommodated 335-35-20. Please send invoice and method of payment to my email address and I will remit it promptly. I hope that you can still ship this week.

[bulldogchevy]

Hey Tyler
Waiting on you ready to buy
Need kit ASAP

Thanks Scott

[Addicted]

:lolhit:

[clu269]

My kit is going to ship tomorrow. I should have it on Monday. I want to thank Tyler and Dawn for all there help and putting up with my impatiens. I must have inquired about my order 10 times!
:cheers: Clu

[sixty5hellvell]

Can I get a quote on the trans crossmember please?:) It is really nice I want one.:yes: Here is my attempt at a chevelle frame.

[ShadowGrayGuy]

Got my order finalized and it should be here next week. Can't wait!

Rob
'70 Shadow Gray SS
AES-built 565 Dart Fast XFI EFI (street friendly 700hp)
Rick's Stainless Tank
DRC Racing Transmissions-built 700R4 (he says "trust me, it'll work or I'll replace it!")
Strange S60 3:73 w/ Power Lock Diff
SC&C Street-Comp AFX suspension package
Hellwig sway bars
Chassisworks Dbl Adj Varishocks
Currie Correctrac rear suspension
Baer 14" Pro-Plus 6P front & 13" SS4+ rear brakes
NewGen 500's 18X9, 18X10 brushed finish & painted to look like stock SS wheels (275/35 fr & 305/40 rear)

[64pontiac]

Here ya go! another batch.

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/IMG_3802.jpg

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/IMG_3803.jpg

http://i1204.photobucket.com/albums/bb407/HPIcustoms/Chevelle%20frames/IMG_3884.jpg

[64pontiac]

Ok so more exciting news! Just picked up another A body frame to give the full treatment to for stock. Affordable rolling chassis' are coming up!

[BanditDave]

:woot: :woot: :woot: :willy: :thumbsup:

[jocko124]

I got Dibs on one of them!!!!!!

[tones2SS]

Very nice!:woot:

[clu269]

Just received my kit. Looks exactly like the picture complete with hardware. I want to take this opportunity to thank Tyler and Dawn for their help with my project. If you want to build your own chassis off of the original platform this is defiantly the way to go. I will post pictures as soon as I get chassis complete.

[tgvettes]

Hey Tyler
just sent you a PM, let me know when you can.

Tonny

[JND]

Hi, Tyler i am also interested in a K kit for my 69 Chevelle frame, tried to send a PM but was unable to.. could you PM the cost of a kit.. thanks

[strtcar]

Can you please PM me a price for a kit with shipping to 60089. For a 70 Chevelle.

[Addicted]

Received everything, looks GREAT will update as progress goes!!!

[mnchevelle]

Wow this is something that i've been searching for the design looks great. I didn't see a price anywhere not sure if it wasn't posted well if I could get one for 70 chevelle zip 55016.

Thanks so much,
Paul

[willj313]

any pics of this kit installed on frames

[strtcar]

I was reading about this kit on chevelles.com, does it require the body to sit higher on the frame than normal?

[forcepower]

I know I'm bringing back an old thread. These kits have been out for a couple years now. so lets see some pics! I will be installing mine when I have some spare time.

[HEEP]

Here's mine with the HPI and ABC kits installed.

http://i115.photobucket.com/albums/n306/HEEP_2006/IMG_5323_zps416632a5.jpg (http://s115.photobucket.com/user/HEEP_2006/media/IMG_5323_zps416632a5.jpg.html)

[214Chevy]

Here's mine with the HPI and ABC kits installed.

http://i115.photobucket.com/albums/n306/HEEP_2006/IMG_5323_zps416632a5.jpg (http://s115.photobucket.com/user/HEEP_2006/media/IMG_5323_zps416632a5.jpg.html)

Lookin good Bill.