NewGen: NEW WHEEL! "The Slide"

[DriverzInc]

New wheel from NewGen.... "Slide".

Shown here in concave, it is also available in standard profile, and deep concave. Finished, with a brushed and cleared center, and chrome outer.

Remember, NewGen 3pc wheels are available in chrome, for NO extra charge.

The cap, for those who noticed, is aluminum, engraved, and filled in with black to pop on the brushed finish. I think they turned out sweet. This will be standard on ALL brushed and cleared 3pc wheels now. Hope you like?

Key features:


Concave, Deep Concave, and Standard profile
6061-t6 Forged Center
Step lip and Soft Lip Sizes 18" and up
Finish options (at no extra charge) include powder coat, brushed, cleared, and chrome
Custom offsets, hub diameters, and bolt patterns


http://i37.photobucket.com/albums/e99/Hensons/NewGen%20Wheels/IMG_2238-1.jpg
http://i37.photobucket.com/albums/e99/Hensons/NewGen%20Wheels/IMG_2228-2.jpg
http://i37.photobucket.com/albums/e99/Hensons/NewGen%20Wheels/IMG_2242-1.jpg

For pricing, please visit our new website, www.driverzinc.com (http://www.driverzinc.com). It will be up in a few minutes, but shares the same price as the "Chamber".

Chamber.... Slide..... see a pattern here? :)

[wiedemab]

Those look great - - - - Keep up the good work.

[MarkM66]

Can they be made over 10" wide, if so how much extra?

[JustinB]

Mark, they can. It is a 3 piece wheel, we do not charge for the wider hoops up to 11". Anything over 11" wide adds $25 per wheel.

[MarkM66]

Thanks.

Where the spokes bolt to the hoop, due to the design of the wheel, is it further back then other designs? Thus giving it a deeper dish but with the same offset? Hope that made sense.

Good looking wheel. I would like to see them on a car.

[buickfunnycar.com]

Nice clean design Jon,love the no-hassle chrome hoops!:thumbsup:

[DriverzInc]

Thanks.

Where the spokes bolt to the hoop, due to the design of the wheel, is it further back then other designs? Thus giving it a deeper dish but with the same offset? Hope that made sense.

Good looking wheel. I would like to see them on a car.

Mark, the flange (where the 3 pieces meet) is in the exact same place it would be with a standard forging, its just the profile of the spoke that ramps forward then at the point where they meet the outer, they 90 back to the flange. So the wheel outer width is the same regardless if we use a standard profile, concave, or deep concave center.

(I hope that makes sense). If not, let me know and I can try to explain it another way.

How you been by the way? Haven't talked to you since those Schott wheels.

:cheers:

[tones2SS]

Those are killer Jon. Good call on making them concave.
Keep up the great work.:cheers:

[Matt@BOS]

I like the direction that New Gen has been heading. Any plans on a split 5 into 10 spoke mesh wheel or similar?

Regardless, I'm really digging these. How many growlers of Stone Beer would it take to get a set?

Matt

P.s. regarding the naming theme... I have faith that you will, but please tell me you will stop before making a bullet wheel, the world has seen enough Mustang guys with their "Bullitt" aka Torque Thrust II wheels.

[street3285]

Sweet, this is an awesome looking wheel. These would be perfect for my 84 chevy truck!

[dxgxmx]

that is one clean looking wheel
killer design :thumbsup:

[DriverzInc]

Thanks for the compliments everyone. I've been working hard on the new, NewGen designs, and I'm glad people like them.

Matt, there will be a "Trigger", and a "Hammer", but no Bullet, I agree. That one has been overused IMHO as well. :) But, I guess never say never...

PS, our growlers are empty :willy: :cheers:

[72RS/SS396]

How about a thread to suggest/vote/decide the next name :drive:

[Matt@BOS]

Thanks for the compliments everyone. I've been working hard on the new, NewGen designs, and I'm glad people like them.

Matt, there will be a "Trigger", and a "Hammer", but no Bullet, I agree. That one has been overused IMHO as well. :) But, I guess never say never...

PS, our growlers are empty :willy: :cheers:

Jon, I have to go to Best of Show tomorrow morning, so I will be calling soon to take orders!

Matt