talbotdd
01-29-2011, 11:52 AM
I have a complete Big brake upgrade kit from Master Power Brakes for sale.
Fits - 1967-1969 Chevy Camaro and Pontiac Firebird; also 1968-1979 Chevy Nova, Buick Apollo, Olds Omega and Pontiac Ventura.
I bought the kit for $1029 and have only installed it for mock up and rolling around during build. HAS NEVER BEEN DRIVEN ON.
I have since decided to go with a PT build with 19" wheels and I am now going to go with a wilwood 14" brake kit.
Includes:
12" vented cross-drilled rotors
Calipers and pads
Superior - 2" drop spindles
Brake hoses
Bearings/seals/dust caps
Hardware
(Master Cylinder, prop valve, pedals, etc pictured below NOT INCLUDED in price)
http://i300.photobucket.com/albums/nn4/dustintalbot/69%20Camaro/P1010170.jpg
The bearings, seals, and dust caps have already been installed in the hubs. The drop spindles have been cleaned, primed, and sprayed with Chassis black paint. The rotors have some very slight surface rust from sitting. The calipers, pads, and hoses are still in their boxes.
Everything you need to bolt on a big brake system and drop your Camaro 2".
Here is a link to the base kit from MP Brakes - I paid $200 extra to upgrade to the 12" rotors and spindles.
http://www.mpbrakes.com/products/product-detail.cfm?product_id=413
My loss is your gain. Save yourself $400 - still like new.
ASKING $650obo + shipping
Also have a BRAND NEW proportioning valve and 1 1/8 master cylinder for an additional cost if you are interested.
Thanks,
Dustin
Fits - 1967-1969 Chevy Camaro and Pontiac Firebird; also 1968-1979 Chevy Nova, Buick Apollo, Olds Omega and Pontiac Ventura.
I bought the kit for $1029 and have only installed it for mock up and rolling around during build. HAS NEVER BEEN DRIVEN ON.
I have since decided to go with a PT build with 19" wheels and I am now going to go with a wilwood 14" brake kit.
Includes:
12" vented cross-drilled rotors
Calipers and pads
Superior - 2" drop spindles
Brake hoses
Bearings/seals/dust caps
Hardware
(Master Cylinder, prop valve, pedals, etc pictured below NOT INCLUDED in price)
http://i300.photobucket.com/albums/nn4/dustintalbot/69%20Camaro/P1010170.jpg
The bearings, seals, and dust caps have already been installed in the hubs. The drop spindles have been cleaned, primed, and sprayed with Chassis black paint. The rotors have some very slight surface rust from sitting. The calipers, pads, and hoses are still in their boxes.
Everything you need to bolt on a big brake system and drop your Camaro 2".
Here is a link to the base kit from MP Brakes - I paid $200 extra to upgrade to the 12" rotors and spindles.
http://www.mpbrakes.com/products/product-detail.cfm?product_id=413
My loss is your gain. Save yourself $400 - still like new.
ASKING $650obo + shipping
Also have a BRAND NEW proportioning valve and 1 1/8 master cylinder for an additional cost if you are interested.
Thanks,
Dustin