69 Vette - Killer II Project Thread

[Werks]

I purchased 69myway's Killer II project back in March '10. Throughout the summer, progress was slow but now the project has started gaining more momentum so I figured I would share.

The basics of the project are:
'69 Corvette Convertible
L88 Flares and Hood
L18 496 Big Block
FI, AC, Cruise
Richmond 6sp
VB&P Suspension

Some background on what was completed by 69myway: McSpeed.com (http://www.McSpeed.com)

http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0206.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0205.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0146.jpg

The L18 is a big block with LSx DNA so I decided I would make the L18 look similar to an LSx by smoothing the aluminum intake and wrinkle coating black. Once I get my new garage going, I will fabricate some FRC's to fit the massive valve covers.
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0159.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0161.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0181.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0189.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0191.jpg

The body work has begun! Tim Bragg of D&D Classic Restoration
(http://www.ddclassic.com/) is my body man. He has been making quite a bit of progress since November. The car has been painted at least 4 times taht we can tell. 3 times red and once silver. This time around, it will be black :cool:
http://img.photobucket.com/albums/v513/werks/Killer%20II/102.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/105.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/116.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/117.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/093.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/corvette005.jpg

[Werks]

http://img.photobucket.com/albums/v513/werks/Killer%20II/corvette006.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/corvette012.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/corvette025.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/corvette026.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/corvette029.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/corvette030.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/corvette032.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0100.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0102.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0103.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0104.jpg

[Viperlover]

I was wondering what had happened to this project, good to see that it is getting completed. Plans for wheels/tires?

[Werks]

I've have been wondering the same thing. I would like to do something different than the original car but I can't seem to find the right set. Any suggestions? Sizes should be in the neighborhood of 295/18 front and 335/18 rear but there are not many brands to choose from.

[coolwelder62]

I've have been wondering the same thing. I would like to do something different than the original car but I can't seem to find the right set. Any suggestions? Sizes should be in the neighborhood of 295/18 front and 335/18 rear but there are not many brands to choose from.

Best bang for the buck in tires that size are the BFG's KDW's check out tire rack .com or discount tires.com.Real nice looking body work.3rd gen corvette's are good lookin car's.:thumbsup: Scott

[Bowtieracing]

Those flares are super cool. Cant wait to see it on paint.

[69MyWay]

Oh MAN! That all over primer looks sweeeeet!

I'm jealous. I really hope I get to go for a spin in the Modern Rat once it has a windshield and all in....

I miss that project...but I do have a finished basement to show for having giving it up! LOL

At least the whole family can pile in the basement and hang out while it is -5 degrees outside.

We'll get that a/c system together once the slick stuff is on and together!

Keep the updates coming - I'm subscribed!!!!!!!!!!!!!

[waynieZ]

It looks great all one color. Sweet project.

[WSSix]

Man this is just pushing me more towards wanting to do a C3 project. I never got into body work when I was repairing/modifying these cars but I've wanted to. I love the chrome bumper cars but think a late c3 can look amazing when done right. There are so many late c3s that need body work done for a cheap price. This just might push me over the edge, lol.

Keep up the good work and keep the pictures coming.

[JohnC]

Congrats, Brad. Glad to see it making progress. I look forward
to see it pounding the streets this summer....maybe.
Nice talking with you earlier...

Glad you started a build thread here--very cool site.

Looks "killer" just seeing it all one color even if it is primer...:D

:thumbsup: John

[Werks]

Thanks for the comments guys! I should be able to get some more pics this weekend, hopefully. Ill make sure I keep the thread up to date.

Chris- You know you'll get a ride! I can't wait to drive the hell out of this thing. You know I'm not much into garage queens... On a side note, do you remember if the metal vents on the deck lid where in the boxes? I didnt run across them when I was looking for painted parts. If I have to pick up some used ones, are they any different from coupe to convertable? I can't find any listed in the paragon or eckler's catalogue.

[69MyWay]

Brad I just don't remember about the vents. I seem to have a memory of seeing and handling them - but it is foggy.

Coupe/Vert - a/c, or non - the vent should all be the same.

They are actually a cast metal part and very heavy.

[Werks]

A little update for anyone who is following. The car is now all in urethane primer. It will be blocked one more time and ready for color. The doors and cover are do for one more blocking and they will be ready. Before color though, the engine bay and firewall will be finished and smoothed to a point. I want some original detail but most of the holes, bolts, and studs will go along with the AC access panel. It will all get finished in satin black.

http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0115.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0120.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0149.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0150.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/SANY0176.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0118.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/SANY0183.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/SANY0172.jpg

[JohnC]

Looks great, Brad!:thumbsup:

Are you still in Ky? or MI yet?

Can't wait to see it in black....:wow:

...hopefully in person someday.

:cheers:

[69MyWay]

Brad - it is looking AWESOME!

:thumbsup:

[BirdsThaWord]

Good on you getting that body straight. I know it takes a lot of work! Here's some 18"+ wheel ideas I've seen on C3's :
http://img843.imageshack.us/img843/1315/chrismcdonalds.png (http://img843.imageshack.us/i/chrismcdonalds.png/)

[/URL]

http://img263.imageshack.us/img263/3584/driverssideexterior.jpg (http://img263.imageshack.us/i/driverssideexterior.jpg/)

[/URL]

[1Michel]

Good on you getting that body straight. I know it takes a lot of work! Here's some 18"+ wheel ideas I've seen on C3's :
http://img843.imageshack.us/img843/1315/chrismcdonalds.png (http://img843.imageshack.us/i/chrismcdonalds.png/)

[/URL]



Isnt that Ol Killer no 1?

[JohnC]

Isnt that Ol Killer no 1?

Correct, but now looks a little different and is known as KAOS....

[BirdsThaWord]

Correct, but now looks a little different and is known as KAOS....

Anyone have the updated pics? Of KAOS I mean? I might build another one and would want to take ideas off it. Here's a diff shot of it with another killer C3 that I had stored on my computer:

http://img816.imageshack.us/img816/4276/killervettes.jpg (http://img816.imageshack.us/i/killervettes.jpg/)

[/URL]

[69MyWay]

Here is a build thread on Killer I - aka Kaos.

http://www.digitalcorvettes.com/forums/showthread.php?t=142794

[BirdsThaWord]

Here is a build thread on Killer I - aka Kaos.

http://www.digitalcorvettes.com/forums/showthread.php?t=142794

Thanks brother! Looks like it's getting a new heart! According to his last post, looks like we may see the finished product this month.

[Werks]

Thanks for the comments guys! Its coming to togther pretty smooth so far. We're shooting for beginning of April for completion.

As far as wheels are concerned, I feel that the wheel ca make or break the car. I have been struggling a little in that department as I can be pretty indecisive sometimes. I am certainly open to suggestions! I want something diffrent than Killer I but it has to be clean and smooth yet aggressive...

[groovyjay]

Looks really good, can't wait to see'er finished! :thumbsup:

[89 RS]

Awesome project. :thumbsup: I love the C3 body style.

[69MyWay]

By the way, I have part I and II of the 8.1 swap from the magazine up on-line


http://mcspeed.homestead.com/Not-Another-LS1-Swap-Swap.html


http://mcspeed.homestead.com/Not-Another-LS1-Swap-Swap-Part-II.html


Hope to get the custom fit sure fit a/c system in and have that article up before too long.

[Werks]

I believe I have found the wheels I want. I've been looking at them for a few days now. I need some backspace measurements before I can order though so I'll I need to make another road trip up to see the car...

[JohnC]

I believe I have found the wheels I want. I've been looking at them for a few days now. I need some backspace measurements before I can order though so I'll I need to make another road trip up to see the car...

Well??? What are they? ...LOL

:willy: :D :cheers:

[Werks]

Looks good Chris, although the text is a little jumbled on my screen. Is it just my screen setting? Its still readable for me but not super clear.

[bingham72]

Another C3 vette! Awesome!

[Werks]

The engine bay is done and sprayed! He didnt send me the greatest pic but progress is progress.
http://img.photobucket.com/albums/v513/werks/Killer%20II/SANY0191.jpg

Here it is waiting for pick up
http://img.photobucket.com/albums/v513/werks/Killer%20II/SANY0188.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/SANY0186.jpg

Drum roll please......




Color!!!!11!!!1!

http://img.photobucket.com/albums/v513/werks/Killer%20II/mms95picture.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/SANY0196.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/SANY0193.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/SANY0192.jpg

[Ron in SoCal]

Awesome color! Looks excellent Bro...:woot:

[Werks]

Well??? What are they? ...LOL

:willy: :D :cheers:

Here's a peek :D

http://img.photobucket.com/albums/v513/werks/Killer%20II/vintageracer2.jpg

[69MyWay]

AWESOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
:hail: :hail: :hail: :hail: :hail: :hail:

[JohnC]

Here's a peek :D

http://img.photobucket.com/albums/v513/werks/Killer%20II/vintageracer2.jpg


Wow!:wow: Those are nice! Vintage wheel works? What sizes will they be?

Car looks amazing, Brad. Congrats! Can't wait to see it....

:thumbsup:
John

[Werks]

Yes, Vintage Wheel Works V48. They will be 17's all around. I considered a staggered 17 & 18 combo but I like a little more sidewall in the back for looks plus Michigan roads equals 17's in this case. I want to take some final measurements before I order the wheels but they shouldn't take long to come in. The tech guy for VWW told me they should ship in 48 hours. The headers and exhaust are at Aesthetic Finishers.

[fireflash]

Its great to see more people fixing nice c3s make me want to fix one .Car looks great in black and those wheels!!!!!!!!!!!!!!!!!!!!:cheers:

[Werks]

http://img.photobucket.com/albums/v513/werks/Killer%20II/SANY0210.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/SANY0206.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/SANY0205.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/SANY0204.jpg

[Werks]

http://img.photobucket.com/albums/v513/werks/Killer%20II/0402111458b.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/0403111126.jpg

[Werks]

http://img.photobucket.com/albums/v513/werks/Killer%20II/mms95picture-1.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/mms95picture_2.jpg

[waynieZ]

Looking good!

[groovyjay]

:_paranoid :_paranoid :_paranoid :thumbsup:

[Werks]

Wheres the beef? Its right here....285's & 345's. I built a jig to measure offset and position the tires where I want them. Tires will be mounted tomorrow, at the local Ferrari dealership of all places...Ill get some more pics once it rolls on new rubber. Next step it to wire the car, slow and painful!

http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0229.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0249.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0232.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0235.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0246.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0291.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0295.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0298.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0301.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0307.jpg

[Sandbagger]

The KumhoXS is a great trackday tire . I run them on my C4 . They are like hockey pucks in cold weather though . Very predictable break away point .

[69MyWay]

What did you come up with for wheel size/offset?

Man...I can't wait for the shoes on the ground shots.

By the way, you know you can lower and raise the vehicle with the jam nuts on the end of the springs front and rear to get the right stance.

Roll it around a bit and let it settle before you take those pics...LOW AND MEAN baby!

Here is a shot of my old 69 on some of the most recent modification work to it - notice how low it is.....

http://i159.photobucket.com/albums/t139/69LUCFR/IMAG0826.jpg

[bonecrrusher]

69MyWay... are you Kaos on CorvetteForum?

I saw this car on the SE section of that messageboard.....

[69MyWay]

69MyWay... are you Kaos on CorvetteForum?

I saw this car on the SE section of that messageboard.....

No I am not Kaos, that is my buddy Rob that bought the car. The other car was originally called Killer - as it was seen and known on the magazine articles, advertisements, etc. I had originally built it and he took it over in 2008. He is now adding his own touches to it - and it is truly KAOS with a whole new identity- really making it his own and taking it to that next level. The subtle changes and details they are doing with a fellow named Josh at the Custom Image shop are just amazing.

[Werks]

Chris, the sizes are:
Front - 17x9.5 5"offset
Rear - 17x11 5" offset
I didnt have time to roll it around tonight and Ill play with the stance later. I wanted to get these on before dark tonight and make sure everything fit. The rears ended up perfect! I was kind of conservative in the front but I know it wont rub or have any issues. Let me know what you think. I cant wait to get some chrome on the car, especially the roll bar. It should really bring the car together at that point.
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0314.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0321.jpg

[groovyjay]

Love it! :cheers:

[Werks]

thanks!

[Werks]

I got some goodies in the mail. My keyless system from AdvancedKeys.com is pretty slick. You carry an active proxcard in your wallet. When you approach the car it will unlock itself and allow the ignition to be armed. Push the botton to start, system will crank the engine for you, another push and its off. Walk away and the car will lock itself. You never have to use a key and its more secure than a modern OEM system. If you notice, the door locks have been shaved in anticipation of this feature.

The other package was the new VHX gauge system from Dakota Digital. A completely modern look with integrated gauges, turn signal & high beam indicators, digital readout, and a central gauge input module with info being relayed to the gauges via eithernet cable to minimize wiring and complexity.

http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0375.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0371.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0364.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0362.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0361.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0331.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0335.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0347.jpg

and the shop dog...
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0354.jpg

[69x22]

Looking good, love the sidepipes and wheels.

[Werks]

http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0480.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0579.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0580.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0581.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0597.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0598.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0599.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0600.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0603.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0607.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0613.jpg

[69MyWay]

Awesome!

[kaos]

Hey Werks/Killer II

That is looking AWESOME!!!

I really like the deep redish color interior contrast against the black paint.

Those gauges came out great. What are the plans for the center console where the other guages use to be?

Kaos is coming to life. It is back here in Miami as of last week where I am finishing up a few last items here & there with hopes by the end of August it will be officially done except for some new wheels which will be ready in about a month's time.

Keep up the great work. I keep telling myself it will be all worth the wait in the end.

[JohnC]

Very cool. I look forward to seeing it on Woodward...what day(s) you going?

John

[fleetus macmullitz]

Likely to draw some attention. ;)

Really like it. :thumbsup:

[coolwelder62]

Very Cool.:thumbsup:

[Werks]

Thanks guys! I've had a few set backs (cracked the new windshield is one) recently but trying not to get discouraged. I praying for an uneventful run to Woodward!


Those gauges came out great. What are the plans for the center console where the other gauges use to be?
Nothing is there right now, Im planning on a nav/stereo unit there with a few coordinating carbon fiber pieces to match the gauges. I also need to mount my lexus push to start button on the center console. Lots of work left to go! but its coming along.

Very cool. I look forward to seeing it on Woodward...what day(s) you going?

I'll be cruising Friday night and and Saturday afternoon. I am tentatively scheduled to go to the flint cruise tomorrow but Im not sure if I'll take the vette or not. I have an alignment scheduled for tomorrow morning so hopefully that will go well. If I dont go to Flint or get back early enough, Ill make a few runs down Woodward Thursday night.

[89 RS]

Very nice, great looking Vette...those wheels are sweet also.

[WSSix]

looks fantastic! Those gauges are really great too. Good job and good luck getting it finished.

[brianb]

Absolutely bad ass! Fantastic job.

[waynieZ]

Sweet!

[avewhtboy]

I guess he's too busy driving it to update this page?

beautiful car :hail:

[Werks]

Hey guys, Im trying to get back into the car scene. I keep having life get in the way! Anyways, I thoguht I would post a few pics from Woodward while I'm on here. Hopefully I'll get moving along again here soon.
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0626.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0629.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0715.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0718.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0717.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0714.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0696.jpg

[69MyWay]

WOW!!!!!!!!!!!!!!!!! Now that will get your heart pumping again on a cold midwest winter night!

[kaos]

Looks great!!! What's remaining? Any more pics of the interior?

I just realized you have the chrome trim around the windshield painted black!!! :thumbsup: Hmm...give me something to seriously consider on the original Killer/Kaos as it is all blacked out now and I think this would look great having the trim black around the windshield.

[kaos]

I just realized you have the chrome trim around the windshield painted black!!! :thumbsup: Hmm...give me something to seriously consider on the original Killer/Kaos as it is all blacked out now and I think this would look great having the trim black around the windshield.

Can you get some close ups pics of the trim painted black around the sides & top of the windshield?

[Werks]

Looks great!!! What's remaining? Any more pics of the interior?

I just realized you have the chrome trim around the windshield painted black!!! :thumbsup: Hmm...give me something to seriously consider on the original Killer/Kaos as it is all blacked out now and I think this would look great having the trim black around the windshield.

I need to finish up the interior by installing the AC, door panels and top. It needs to be detailed too. Its gotten quite dusty. I have a nice solution for cleaning up the engine bay as well.

Painting the trim black isn't a bad idea! I havent installed mine yet which is why it looks black. I still have the standard stainless. Powder coat perhaps?

I have a few finishing touches that are yet to come as well. I need to finish a side project first and then ill be back on this one.

[groovyjay]

Love it!!! :thumbsup: :thumbsup: :thumbsup:

[kaos]

Cool. I am going go for it painting or powder coating the windshield trim black. It will give it a quiet different look.

Keep up the great progress!!

[kaos]

Cool. I am going go for it painting or powder coating the windshield trim black. It will give it a quiet different look.

Keep up the great progress!!

I should have the black trim completed by mid March. I need a new windshield (got a nasty long crack) so since the trim needs to come off anyways might as well get this mod done. I really like the look of your car without the chrome around the windshield.

[kaos]

I should have the black trim completed by mid March. I need a new windshield (got a nasty long crack) so since the trim needs to come off anyways might as well get this mod done. I really like the look of your car without the chrome around the windshield.

I got it done finally. I had the trim powder coated all shinny black. It looks so much better having black around the windshield. I snapped off a couple pics in the garage and car is dirty from doing a Vintage Air Gen IV swap from Gen II evaporator but I got some pics to share with you. I am flying this evening but will try to post pics tomorrow. I think you will like this also having the black trim around the windshield & I also did the door trim too.

[kaos]

What was once chrome or polished aluminum is now all powder coated shinny black to blend in with the theme of my ride. Thanks Killer II for the idea. Also had the trim along the top door edge and little stayfast caps on the top powder coated black.

http://i1269.photobucket.com/albums/jj591/Kaos69Vette/Window%20Trim/031.jpg

http://i1269.photobucket.com/albums/jj591/Kaos69Vette/Window%20Trim/029.jpg

http://i1269.photobucket.com/albums/jj591/Kaos69Vette/Window%20Trim/027.jpg

http://i1269.photobucket.com/albums/jj591/Kaos69Vette/Window%20Trim/026-1.jpg

http://i1269.photobucket.com/albums/jj591/Kaos69Vette/Window%20Trim/025-1.jpg

http://i1269.photobucket.com/albums/jj591/Kaos69Vette/Window%20Trim/009-1.jpg

[FLYNAVY53]

Any new updates on Killer II?? I know this thread has been dead for a while, and theres a For Sale thread posted....just wondering how the interior turned out :thumbsup:

[Werks]

Im buttoning up the interior as I get time. Hopefully I'll have some pics up in the next few weeks.

[andreb]

I'll be looking forward to the pics! :computer:

[cozmo76]

wow mate, apart from the seats (i do understand why you have used them due to the boot arrangement) there is not 1 thing i would change on this car, wheels could not have been more perfect!!!!

good job mate.
cheers
corrie

[jydracing]

I like 69 corvettes,,,,,,had one once only white on white!!!

[vstol]

Chris, the sizes are:
Front - 17x9.5 5"offset
Rear - 17x11 5" offset
I didnt have time to roll it around tonight and Ill play with the stance later. I wanted to get these on before dark tonight and make sure everything fit. The rears ended up perfect! I was kind of conservative in the front but I know it wont rub or have any issues. Let me know what you think. I cant wait to get some chrome on the car, especially the roll bar. It should really bring the car together at that point.
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0314.jpg
http://img.photobucket.com/albums/v513/werks/Killer%20II/IMAG0321.jpg


How did you set up your air intake?
Kevin