DriverzInc: 18" Vintage Wheel Works V40 and V45's!!!

[JustinB]

After talking to Vintage Wheel Works and years of waiting, we finally got the nod to start selling 18" V40 and V45's! As of today, they have hoops for 18x7,18x8, and 18x9.5. 18x11's will be available in a little over a month. Feel free PM, call, or email for prices quotes.

V45
http://i2.photobucket.com/albums/y8/jbutler45/driverz/productimage-picture-vintage-wheel-works-v45-54_jpg_400x400_q85.jpg

V40
http://i2.photobucket.com/albums/y8/jbutler45/driverz/productimage-picture-vintage-wheel-works-v40-53_jpg_400x400_q85.jpg

[Roberts68]

Nice!

Hey, for us rookies that are not up on them... Which is which?

I like the straight spoke in the bottom picture just a touch more myself.

Have you any experience with trying the C5 or C6 brake templates on these?

I guess I don't know if practically all 18's work with those brakes or not, soooo I'm sorry if it is a redundant question with a rather obvious answer. You can translate that last part as you see fit.;)

[JustinB]

Sorry, I added which was which above the wheels. The pad length on the VWW wheels is .75". The C5/C6 kits need about .78" caliper clearance. It is very close but you will probably need a very small spacer to push the wheel out away from the face of the caliper to clear the brake.

[Roberts68]

Sorry, I added which was which above the wheels. No worries, I didn't know so I asked.

The pad length on the VWW wheels is .75". The C5/C6 kits need about .78" caliper clearance. It is very close but you will probably need a very small spacer to push the wheel out away from the face of the caliper to clear the brake.
Now, that is some useful info. :thumbsup:

[coolwelder62]

It's nice to see they added a 11" wheel to the mix.When I talked to them 9.5" was as wide as they were going to have.:thumbsup:

[waynieZ]

Will they come in custom backspacing?

[JustinB]

Will they come in custom backspacing?

Yes sir!

[Sieg]

Are they available with semi-flat black centers?

[JustinB]

Are they available with semi-flat black centers?

Vintage does not offer any custom finish options. We could always paint them for you.

[Sieg]

Vintage does not offer any custom finish options. We could always paint them for you.Thanks, approx. charge? PM me if you like.

[DriverzInc]

They are also now up on our new website, and available for purchase:

http://driverzinc.com/category/wheels/vintage-wheel-works/

:lateral:

[JustinB]

Thanks, approx. charge? PM me if you like.

PM sent!

[Sieg]

PM sent!

Back at Ya! :unibrow:

[Sieg]

Big thank you to Justin at Driverz Inc. I truly appreciate all the time and knowledge you spent with me today. Good things happen to good people. :thumbsup:

[JustinB]

Big thank you to Justin at Driverz Inc. I truly appreciate all the time and knowledge you spent with me today. Good things happen to good people. :thumbsup:

Thanks Scott! Glad I could help.:cheers:

[Sieg]

After a long hiatus the spending process has begun once again. :unibrow:

[MarkM66]

Are the 18x11's available yet?

[JustinB]

Are the 18x11's available yet?

Not yet, but hopefully within a month.