Carbon fiber blems!!

[Teetoe_Jones]

Here is our current list:

010011- 69 Camaro header panel 100% carbon (x6) $75 plus shipping
010010- 69 Camaro header panel C/F (x10) $50 plus shipping 1 out of 9 SOLD!
010008- 67/8 Camaro header panel 100% carbon (x6) $75 plus shipping -3 of 5 SOLD!!
010009- 67/8 Camaro header panel C/F (x5) $50 plus shipping

All parts above are discontinued PN's and are glossy finish from first batch of headers we produced 3 years ago. Most have been 'keyholed' to help installation (Mold was a bit too flat) and the weave is mostly rated 8 out of 10 or below and is therefore 'Paint Grade' finish.

010002- 67-69 Camaro cowl induction hood C/F glossy, warped leading edge (x15) $300 plus shipping 3 of 15 SOLD!
010004- 67-69 Camaro cowl panel C/F glossy, poor fit, warped (x2) SOLD!!
010005- 67-69 Camaro cowl panel 100% carbon glossy (x1) return for bad weave/warp -SOLD!
010018- 69 Camaro rear spoiler C/F glossy (x1) return for shipping damage- cracked in multiple places $150 plus shipping
010016- 67/8 Camaro rear spoiler C/F glossy (x1) return- client changed mind SOLD!!
010052- 69 Camaro rear spoiler C/F satin (x2) return- SOLD!!
020202- 70-72 Camaro A pillar glossy (x1) return- we shipped incorrect item $125 plus shipping
010015- 67-69 Camaro front spoiler satin- Return- client did not want to cut for fit on 67 Camaro SOLD!!

All belms are sold as is. there is no returns, exchanges, refunds, etc for Blems of any kind. I need warehouse space very badly and need these items gone. This is a great way to shed weight for a fraction of the cost.

Tyler

[ssable]

interested in the front spoiler! PM on the way.

[Teetoe_Jones]

Calling us is the best and fastest way to get one of these parts.

1-888-723-8882

We are already taking orders. You guys are fast.


Tyler

[bdahlg68]

Calling us is the best and fastest way to get one of these parts.

1-888-723-8882

We are already taking orders. You guys are fast.


Tyler

Just left a message on the 67/8 rear spoiler. Hope its still available!

Brian

[Teetoe_Jones]

I have a pair of decklids for 70-81 Camaros as well; one is a glossy carbon/fiberglass unit that has resin spots in the clear coat; it was installed on a client car- Retail is $499, I'd let it go for $150.
I also have a full 100% carbon decklid that got warped due to client not removing the tension rods on the hinges. Finish and weave are perfect. Retail- $950 I'll let it go for $400.

I also have a 100% carbon glossy power bulge hood for the 70-81 Camaro that got cracked when a shop slammed it home to close it and cracked the leading edge peak. Retail is $1850, I'll let it go for $1300.

Last item is a glossy 1st gen Camaro closeout panel that damaged in shipping. Totally damaged. As in snapped in half. Hanging on by the carbon cloth. Could be repaired and painted. Retail is $349. SOLD!
Tyler

[Teetoe_Jones]

List updated to reflect items sold.

[frankv11]

where are you located?

[Ron in SoCal]

^ SoCal....

[Teetoe_Jones]

List is updated as of today.

[smcox1]

I was wondering if you still have the $150 70-81 decklid

[Roberts68]

I was wondering if you still have the $150 70-81 decklid

Just a heads up here but I read elsewhere that the OP is no longer with Anvil so although I am sure you will hear from him the answer to your question may be best answered via a call direct to Anvil.:yes:

Calling us is the best and fastest way to get one of these parts.

1-888-723-8882

[smcox1]

Ok thank you for the number

[Beach Cruiser]

Is there anyway to get some pictures of the blems on the cowl hood? Interested in one for a mostly track car.

[Bow Tie 67]

The one I bought is remarkably nice, the front center peak is high, roughly 1" or so. If I push straight down it lines up rather well. I'm going to try and just put the latch on and leave it under tension when closed. Oh I weighed the hood its 21 lbs. :thumbsup:

[Van B]

Is there anyway to get some pictures of the blems on the cowl hood? Interested in one for a mostly track car.

I am not sure if you will get an answer to this thread since Tyler is no longer working for Anvil. Maybe just call Anvil direct.