Project Alchemy

[Bryan O]

alchemy: a medieval chemical philosophy having as its asserted aims the transmutation of base metals into gold

Pretty much sums up my '69 Camaro project. Turn a rust bucket into an awesome thing of beauty. Worth more than its weight in gold!! :dance:

OK. OK. I'm not really that delusional, but you get the point. :) Actually, the color I'm considering at the moment is Botanical Green pearl that flops blackish. I've seen it on new Jags.

The car will sport an SS hood and have black hockey stripes and 17inch Rally wheels. Alchemy will look like a generic 1969 RS Camaro. Nothing y'all haven't seen before. Nothing over-the-top fancy for looks. No bling. Very plain interior. Original seats. Original dash. No center console. No visible modern electronics. The goal is to have a simple '69 looking car that drives like a modern sports car. The typical sleeper.

Like any sleeper, looks are deceiving. Here's are the goodies beginning to pile up at Best of Show:

402ci LS2 580H.P. Stroker from Turn Key Engine
Tremec T56 Magnum
DSE subframe
DSE Quadralink
DSE complete, ummm :_paranoid Ford 9" rear end
DSE mini tubs
DSE wiper motor
DSE RS head lamp conversion kit
Vintage Air Gen IV with electric controls
Vintage Air front runner with A/C pump, alternator, PS pump & H2O pump
Stainless steel gas tank for LS motor high output fuel pump
American Auto wire harness
Ron Davis radiator for LS motor
Hooker header upgrade
Wilwood 6 piston front and 4 piston rear brake kits
Wilwood E brake cable
Wilwood brake master cylinder
Smoked side and rear glass
Flaming River tilt steering column

Here's Alchemy fresh out of the Mohave desert:

https://photos.smugmug.com/Project-Alchemy/i-z7wjQNf/0/7d761ea8/XL/1-XL.jpg (https://bryanoates.smugmug.com/Project-Alchemy/i-z7wjQNf/A)
Here she is just before being sent out for media blasting:

https://photos.smugmug.com/Project-Alchemy/i-T3p3JKh/0/3c0ea0d0/L/2-L.jpg (https://bryanoates.smugmug.com/Project-Alchemy/i-T3p3JKh/A)
and here's my son Trevor, master alchemist, working his magic on the rust bucket:

https://photos.smugmug.com/Project-Alchemy/i-NW3SFhh/0/5b8a14bd/X2/3-X2.jpg (https://bryanoates.smugmug.com/Project-Alchemy/i-NW3SFhh/A)

Thanks for checkin' out my build thread!

[tones2SS]

Very cool. Should be a great project.
Great list of goodies too.:thumbsup:

[Bryan O]

Very cool. Should be a great project.
Great list of goodies too.:thumbsup:

Thanks. Yeah, Trevor and I are having a blast doing the cars. We finished up sanding the cowl grille vent, header and valence panels today. They're now ready for phosphoric acid treatment. Here are the before pictures. I forgot to take pictures after we finished with the DA. Amazing how quickly the metal ozidizes after being touched.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Work%20begins%20at%20BOS/IMAG0093.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Work%20begins%20at%20BOS/IMAG0095.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Work%20begins%20at%20BOS/IMAG0096.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Work%20begins%20at%20BOS/IMAG0094.jpg

Jesus and Chris kicked butt on the body. Here they are finishing off the acid treatment. They've already done the doors and fender, too.

https://photos.smugmug.com/Project-Alchemy/i-gtsvMf4/0/5c58edce/L/4-L.jpg (https://bryanoates.smugmug.com/Project-Alchemy/i-gtsvMf4/A)
https://photos.smugmug.com/Project-Alchemy/i-HskhqLs/0/4e994e2e/L/5-L.jpg (https://bryanoates.smugmug.com/Project-Alchemy/i-HskhqLs/A)

On to etch priming......

[tones2SS]

Very nice. Keep us posted.:thumbsup:

[fleetus macmullitz]

I like the sleeper build style...(other than the Ford 9" :().


:D

[coolwelder62]

Look's great.Please keep the photo's coming.:thumbsup: Scott

[frankv11]

another start to a nice project.
keep us posted

[vinz68]

gonna be a nice car. Very cool your son is helping :thumbsup:

[waynieZ]

Sweet project your making nice progress.

[Bryan O]

I like the sleeper build style...(other than the Ford 9" :()

shhhhh! don't tell anyone! :_paranoid

==============================

Sheesh! Whoever said it never rains in Cal?

The body, doors, fenders and panels have all been epoxy primered. Again, I forgot to take pics of the doors, hood and fenders. Crap!

Here's the body, cowl grille vent, header and valence panels

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0151.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0131.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0132.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0133.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0152.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0154.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0155.jpg

It's interesting to see the before and after of the right quarter. It's going have to be replaced. Really shoddy work done previously. Here it is as I got the car:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Before%20teardown/SDC10060.jpg

The damage really becomes noticeable here:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Teardown%20before%20media%20blasting%20and%20dip/IMAG0063.jpg

And here's the full extent of what has to be dealt with. From back to front and a problem area at the bottom:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0143.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0144.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0145.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0146.jpg

[Bryan O]

Also, the dash where it hides under the window has some issues:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0134.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0135.jpg

Although I knew there was a rust problem with the left rear floor pan it turns out the left front has pinholes through it as well. Here's a pic of the rear:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0149.jpg

Sans pics of the doors, fenders and hood that's where we stand.

[Bryan O]

Folks,

I thought I'd throw this out there for a little discussion and get some your opinions. I am quickly coming to a point where I'm gonna have to commit to the ultimate aesthetic design of Alchemy. Soon I’ll begin working with Casti for a rendering. I’m very lucky in that regard. :yes:

I began this project with the goal of creating a so-called sleeper car. 1969 in appearance. 2010 in performance.

Hears a picture of what I'd be perfectly happy having the car look like. I'd have slightly larger/wider wheels and tires, though. And, yes I do like vinyl tops. :unibrow:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Other%20cars/1969CortezSilverSShoodblackhockeyvinyltop.jpg

However, I'm also really liking the idea of a modern dark green pearl paint that flops black. Black hockey stripes as well. To further complicate matters, I really like the Billet Specialties Legacy 2G wheels.

Here's a pic of a Jag with the Botanical Green pearl paint showing its lighter shade:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Other%20cars/BotanicalGreenJag-1.jpg

And here's a pic showing its darker flop:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Other%20cars/JagBotanicalGreen4.jpg

Here's a link to a pic of the Billet Specialties Legacy 2G as well as a couple of pictures. Its powder coated Gray.

http://www.billetspecialties.com/item.asp?cid=16&scid=128&pid=1086

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Other%20cars/Legacy2-G-1.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Other%20cars/Legacy2-G2.jpg

So, if I go with the Botanical Green and Legacy 2-G wheels have I deviated too far from an orginal 69ish look?

Opinions appreciated.

Thanks!

[Ron in SoCal]

I dig the dark green color, but IMHO the wheels don't fit the theme. Look into some billet ralley style wheels. Those might complete the look....

[Matt@BOS]

Brian, nice to see you on here!

Here's my two cents...

There is really no way of making a '69 Camaro with all DSE components, etc. look like a total sleeper. I mean, it is going to sit 3-4 inches lower than stock to begin with, and in my opinion, a car with that kind of stance looks way too intimidating to be stock. Down the street, Hot Rods built a '69 for a customer who wanted the exact same theme as you. Inside it had a vinyl interior with original seats, and under the hood it had a supercharged LSX making 700+ horsepower. It also had 19" HRE wheels, which became a dead giveaway that it wasn't an ordinary Camaro. It looks exactly exactly the way the description reads, which is a hot rod with a stock interior a clean body. When I saw it the word sleeper did not come to mind.

At the end of the day, people who are interested in cars will know that you've got something really special, and people who aren't interested in cars often won't know or care. So, If it were me, I'd take the retro, understated theme, and apply it to everything. I'd get some wheels like this:
http://driverzinc.com/static/images/productimage-picture-newgen-five-hundred-91_jpg_400x400_q85.jpg
a pair of real comfortable seats that are simple and not race-car looking, and paint the car that Jaguar green because its an awesome color that you like. When you guys are all done with your car it is going to look so shiny that even a stock '69 color would look different on it. Besides, that green is an understated color which doesn't scream custom from 30 feet away like the 2010 Camaro Synergy Green does when painted on an old Camaro.

Matt

[Bryan O]

I dig the dark green color, but IMHO the wheels don't fit the theme. Look into some billet ralley style wheels. Those might complete the look....

Brian, nice to see you on here!

Here's my two cents...

There is really no way of making a '69 Camaro with all DSE components, etc. look like a total sleeper.

Thanks for the comments guys! I hope others will chime in here as well.

Matt, contrary to my natural inclination :) I'm old enough to know life often involves compromises. However, if the BOS Men can swing it I'm going total 69 look on Alchemy. I'm also old enough to have watched Armstrong walk on the moon. :faint: Some said that couldn't be done, too.

Anyhow, I want to push the envelope between 69 look and 2010 performance. Let's see what Chris, Jesus, Jon and D!ck can do in that regard. Of course, nothing's ever gonna happen 'cause of this freakin' rain! Couldn't get anything else done today so I took some pics of some goodies and my doors.

BTW, I think Trevor's drool is about two inches thick on your car by now. He's sure not going retro with his 67. He thinks I'm an old fuddy dud and you're hip, slick and cool. :D

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Parts%20pics/IMAG0187.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Parts%20pics/IMAG0190.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0185.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0186.jpg

SS hood is in pretty good shape except for one ding:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0191.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0192.jpg

[Bryan O]

Grinding all done on inner fenders and bottom of hood. Bottom of hood to be acid treated and etch primed tomorrow.

Santa got caught up in the storms but, yesterday he finally managed to deliver the DSE suframe, Quadralink, rear end, tubs and wiper motor. Pics coming soon.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0215-1-1.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Epoxy%20primered/IMAG0217-1.jpg

[waynieZ]

The parts look great.

[Matt@BOS]

Found the very "sleeperish"wheels I was telling you about.

http://wheelvintiques.myshopify.com/products/billet-rallye-90-series

When I said you'd never have a total sleeper, I merely meant to say that there will always be crazy car people who will be able to tell you're not rockin' a Camaro that is entirely 1969. Everyone else on the other hand won't have the slightest clue it isn't original. I bet there will be more people than you'd imagine who would think you had a 1967 Camaro at a car show. Anyway, the point I was trying to get across earlier is that you can paint your car almost any color you want (so long as it doesn't resemble a bass boat) and most people will never think of it as being a pro-touring beast of a car. They'll likely realize the paint is way too nice to be the original coat, but they won't know it wasn't a factory color.

I should have said earlier that do have every bit of confidence that you and the guys at the shop will be able to make a car that will be a real sleeper to most people on the street.

Matt
Matt

[Ron in SoCal]

x2 on the wheels Matt/Patch. That's exactly the look I was suggesting. And they do look killer on camaros....:thumbsup:

[Bryan O]

x2 on the wheels Matt/Patch. That's exactly the look I was suggesting. And they do look killer on camaros....:thumbsup:

Thanks guys! No doubt they do look killer. The trouble I may run into is the billets of those wheels may start at 18". I'm an old guy and need lots of tire. 17" is all I'm willing to go. Have to have Derby caps, too. That's my story and I'm stickin' to it. :)

Justin is lookin into the feasibility of 17 billets.

[Bryan O]

Turn Key Engine delivered the LS2! :woot:

Me and Trev will be assembling the Vintage Air Front Runner soon.

Here's the engine:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/LS2/SDC10068.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/LS2/SDC10077.jpg

Here's the Front Runner:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/LS2/SDC10069.jpg

And here's our work area:

http://i29.photobucket.com/albums/c299/boates/IMAG0227.jpg

[tones2SS]

Very nice Bryan.:thumbsup:

[Bryan O]

Casti did an AWESOME job rendering Alchemy. Particularly the Botanical Green color! No doubt it was challenging (pun intended :) )

Thanks Michael! :thumbsup:

Here's the target:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Renderings/69Brian51.jpg

Jon has me considering different wheel caps:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Renderings/69Brian61.jpg

I like 'em both but do have a preference. I'm curious what Lat-g members think. Chime in if you feel like it.

[DEIGuy38]

NIce looking rendering. I prefer the smaller disc brake caps.

[tones2SS]

Looks awesome. I prefer the top rendering.:thumbsup:

[Bryan O]

We've been busy with other stuff the last couple of weeks but Trevor and I did manage to get the Front Runner system installed:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/LS2/IMAG0234.jpg

[waynieZ]

Awesome looking power plant.

[FinnRS]

Nice looking setup! :thumbsup:

I also prefer the '67 style wheel caps with larger diameter Rallye Wheels because the later style caps always seem to stick out a little over the wheel trim ring. Unless you can get the wheel with a lip like the rear wheel has in the rendering?

[KPC67]

Great project.
I really want that vintage air front runner.
The top rendering with the larger wheels caps has my vote:thumbsup:

[Bryan O]

...and tell you about a positive experience I had with a vendor recently. We've been hearing lately about some negative experiences members have had with vendors and I think they should be outted.

Marquez Design was great to work with! You are outted Marquez! :)

I recently ordered a lot of parts. There was a snafu with my email address. I called (after 5pm!) to get a copy of my receipt and Judas answered, corrected my email address and had a copy sent to me. All the things I ordered arrived after a couple weeks of placing my order! No months long wait!

Here's some pics. My photography akills do not do these beauties justice. In a few days, I'll be putting up some pics of more bodywork done to my car.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Parts%20pics/DSCN0215.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Parts%20pics/DSCN0166.jpg

[Ron in SoCal]

Parts are so sweet Bryan! I got a pair of Marquesz driving lights too. They're almost too nice to install...:cool:

[waynieZ]

Those are some sweet parts . I love thier stuff. More stuff to dream of.

[Bryan O]

The BOS men are working at light speed.

A confession is in order. I probably should rename the project Never Say Never. :eek:

For various reasons, too numerous to go into detail here, I decided to pitch the "sleeper/retro" look and go all in with an in-your-face PT car. :woot:

Assuming we can get the paint code for Aston Martin's new Magagascar Orange it'll be the color of the car. Wheels are 18inch Fikse Classic Mags from Driver's Inc. Thanks Jon! :thumbsup: 9inch in front and 11inch in back. Nitto 555s with 265/35 in front and 305/40s out back. Still going to put on a lot of tire as the diameter are 25.3inch and 27.7inch.

The interior is still going to be stock simple. But, not plain. The seats are most likely going to be two-toned probably with orange stiching. I'm thinking black and gunmetal might be a good combo.

A DSE dash insert and AutoMeter carbon fiber guages are in transit and a black Budnik Sport steering wheels is on order.

Here's another rendering. But, there will be original chrome door mirrors and a Marquez front bumper painted body color. The grill area will be body color and the tail panel black.
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Renderings/69Brians71.jpg

And here's an Aston Martin Virage with the Madagascar Orange.
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Other%20cars/2012_aston_martin_virage_2_1600x1200-2.jpg

[Bryan O]

I've got about 150 pictures of the car in various stages of evolution. I'd like to show off some of the work all the guys at Best of Show have done so far; D!ck, Jon, Eric, Jesus and Chris. :thumbsup:

Here's a few shots of the car after Jesus and Chris treated it with phosporic acid:
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop039.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop040.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop041.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop042.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop043.jpg

[Bryan O]

Here are some shots after epoxy treatment:
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop044.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop045.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop047.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop049.jpg

[Jr]

The rendering looks great! The guys at BOS are top notch.:thumbsup:

[Bryan O]

Eric and D!ck had this to deal with as they crafted a new tranny tunnel and smooth firewall.

Before:
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop060.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop050.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop056.jpg

After:
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop059.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop103.jpg

[Bryan O]

The car needed a new right quarter panel:
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop065.jpg

And tail panel:
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop116.jpg

Installed :thumbsup: :
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop117.jpg

[Bryan O]

Here's an impressive shot of work done on the left quarter:
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop125.jpg

And here's how she sits today after Jesus applied the primer. Notice the fine cars in the background. You all can see Matt and Steve's Camaros, but, that's a very nice 911S back there as well. Alchemy's got some fine company.
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop128.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop129.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop130.jpg

Minitubs and supports for the Quadralink were also installed as well as this nifty little alteration. Exhaust system installation should prove to be much easier.
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop102.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop101.jpg

I've left out quite a lot of details the guys have done and I'll try and post more later. Right now it's time to get some shuteye. Trevor and I are going to install the Quadralink tomorrow. :woot:

[Leadfoot1]

Very nice work and talk about a place where you dont have to call to ask if they have worked on the car!!!!

Bryan, if i may, i was wondering why you have planned ''Only'' 305's....At first i tought the car did not get mini'd, but since it is, why not get 12 or 13 inch wheels w/335-345's? Its such a biiiiig part of the cars personnality.... I just dont get it. Oh, and hey, remember before anwsering....never say never! :lol:

I also love the colour choice, going to be eye popping to say the least!

Lead.

[coolwelder62]

Wow! What an awesome start on your project.This going to be a great project to watch.:thumbsup:

[Bryan O]

The rendering looks great! The guys at BOS are top notch.:thumbsup:

Very nice work and talk about a place where you dont have to call to ask if they have worked on the car!!!!

Wow! What an awesome start on your project.This going to be a great project to watch.:thumbsup:

Yes, the BOS men rock. Building our cars there has been a great experience for my son and me. They deserve lotsa accolades. And Matt and Steve have been very helpful, too. :thumbsup:

Bryan, if i may, i was wondering why you have planned ''Only'' 305's....At first i tought the car did not get mini'd, but since it is, why not get 12 or 13 inch wheels w/335-345's? Its such a biiiiig part of the cars personnality.... I just dont get it. Oh, and hey, remember before anwsering....never say never! :lol:

:faint: I've come all the way up from 255s. No! I won't say it. :lol:

[waynieZ]

You don't have to say it we can read your mind :unibrow:
The car looks awesome! They do awesome work, and at light speed at BOS! With no corners cut. I love that rendering, I'm drooling all over myself. Glad to see it move ahead so well.

[Ron in SoCal]

A confession is in order. I probably should rename the project Never Say Never. :eek:

For various reasons, too numerous to go into detail here, I decided to pitch the "sleeper/retro" look and go all in with an in-your-face PT car. :woot:



Ahahaha....you woke up! Looks real good Bryan. Congrats buddy. Def (Best of) Show worthy. Looks like Profile 5s in the render...:lol:

[Leadfoot1]

No! I won't say it. :lol:


LOL!! I TOTALLY understand my friend!!! Having bought and started my car as a full on PT car (Forgeline 19 x 9 and 20x 13 w 345's, air ride, t56, LS and C6 Z06 brakes and all...) and finally sold everything and went to Caltrac front and rear w adjust shocks and a BB w a 400 and a brake w a 14 point cage! I know what it is to change your mind!! On top of things... Car is almost ready to get out after 4 plus years and i'M looking at progressively turning it back to PT (wheels first then brakes etc) but slowly. as i learned changing ways costs A Mother fu/!*% lot!!!!

Keep it up thats all that counts!

Lead.
http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF0594.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF1153.jpg

http://i138.photobucket.com/albums/q251/Leadfoot1969/DSCF1155.jpg

[Bryan O]

She's back in shoes.

DSE subframe, Quadralink and subframe connectors installed. I think the DSE T-56 transmission crossmember is next.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shoes.jpg

[Ron in SoCal]

Wow Bryan. Love that cross member! Perfect for the DSE sub and a T56...:thumbsup:

[Bryan O]

Some more pics. Things are moving rapidly.

Here are some shots of the Quadralink/9inch installation process:
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop134.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop136.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop138.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop139.jpg

[Bryan O]

DSE subframe connectors installed:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop144.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop141.jpg

DSE transmission crossmember installed:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop153.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop157.jpg

[Bryan O]

A couple of fenders and a little Marquez action:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop158.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop159.jpg

Alchemy's futrther along than this but I'll have to post the pictures later. Eric's got the hood fitted really nicely. :thumbsup:

[tones2SS]

Car is looking great Bryan. Nice updates.:thumbsup:

[waynieZ]

It looks good. Its moving along nice.

[Bryan O]

Car is looking great Bryan. Nice updates.:thumbsup:

It looks good. Its moving along nice.

Wow Bryan. Love that cross member! Perfect for the DSE sub and a T56...:thumbsup:

Thanks guys!

Eric and Jesus have made a lot of progress finishing off some body work and blocking. Alchemy's in primer and I think Jesus is going to do a final blocking in the next day or two. Trevor and I are looking forward to participating again and it's been awesome to watch these guys work. They're very talented artists!

The DSE roll cage hit has arrived and is going to be installed soon. Recaro Specialists are on the way and should be here next week.

The car will be in paint in a couple of weeks! :willy:

[Bryan O]

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop170.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop171.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop172.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop173.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop174.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop175.jpg

[Bryan O]

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop178.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop185.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop186.jpg

[Bryan O]

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop188.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop189.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop190.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop191.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop192.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop193.jpg

[Bryan O]

And back together....

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop200.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop197.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop198.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop199.jpg

[Bryan O]

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop220.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop219.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop213.jpg

[Bryan O]

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop230.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop229.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop226.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop228.jpg

more to come. :)

[Ron in SoCal]

Bodywork looks great Brian! You can tell that paint job is going to come out perfect...:thumbsup:

Did you decide on a color?

[waynieZ]

The car is coming along Great Brian. I love that lower Valance. Here in Ma. we need front plates so I can't use one and they're anal about it.

[Gandalf]

Looking good Brian! I dig the bodywork. I like the RS with the SS hood - that's going to be a refreshing change.

And yeah - what up with the color choice?
G.

[Matt@BOS]

Looking good Brian! I dig the bodywork. I like the RS with the SS hood - that's going to be a refreshing change.

And yeah - what up with the color choice?
G.

Gregg, you know it's too soon to ask :lol:

BTW Wayne, technically we're supposed to have front plates in CA too, but I guess we're just a little luckier than you guys in MA when it comes to inspection/enforcement.

Matt

[Bryan O]

The car is coming along Great Bryan. I love that lower Valance. Here in Ma. we need front plates so I can't use one and they're anal about it.

Surprisingly, they seem to be much less strict here in Cali. I've driven for 12 years and never had a front license plate and have never been cited. Got three speeding tickets though. :lol:

Bodywork looks great Brian! You can tell that paint job is going to come out perfect...:thumbsup:

Did you decide on a color?

Looking good Brian! I dig the bodywork. I like the RS with the SS hood - that's going to be a refreshing change.

And yeah - what up with the color choice?
G.

Well, there are four really cool colors I'd be happy with. A purple, a black 'n blue, and a grigio. :unibrow: And a tango.

eenie, meanie, miney, mo. :lol:

[Gandalf]

Well, there are four really cool colors I'd be happy with. A purple, a black 'n blue, and a grigio. :unibrow: And a tango.


"Purple".... you must mean "Grape", I'm sure lol. I saw a yellow the other day with flat-black rally stripes. It was definitely you ;-)

Gregg

[tones2SS]

Moving right along Bryan. Bodywork looks good!

[waynieZ]

Patch Speeding tickets are bad enough but atleast you have to do something to earn them. I just had a brain fart, I was going to say I can't wait until my car can be in primer but it is! sounds funny to hear myself say that. Your car looks nice and straight. :thumbsup:

[Steve1968LS2]

Hey, I heard you picked a color finally!!!

:)

[Bryan O]

Hey, I heard you picked a color finally!!!

:)

Yes Sir. And you know what they say. Imitation is the most sincere form of flattery. :)

[Ron in SoCal]

Right on Bryan! Oh, and...

:ttiwop:

[Bryan O]

Right on Bryan! Oh, and...

:ttiwop:

Patience Pedro. :)

[Bryan O]

Jesus finished blocking the car. Dick fitted the grille and adjusted the Marquez bumper .

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop237.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop252.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop249.jpg

DSE four-point roll cage installed:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop264.jpg

[ja.stoner63]

Looks great! Thanks for the pictures...:thumbsup:

[Bryan O]

Jesus has begun to paint. :dance:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/DSCN0530.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop282.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop287.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop288.jpg

[Ron in SoCal]

Lookin' sharp Bry....:thumbsup:

[Bryan O]

Here's a taste of Valencia orange. :woot:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/DSCN0496.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/DSCN0492.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/DSCN0491.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/DSCN0502.jpg

[Bryan O]

Looks great! Thanks for the pictures...:thumbsup:

Lookin' sharp Bry....:thumbsup:

Thanks guys!

Trevor and I will be helpin' out soon. Maybe week after next. We're very excited.

[Bryan O]

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop289.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop290.jpg

[tones2SS]

That orange looks great in the sun.

[Gandalf]

Congrats Brian - a milestone for sure. I stopped by the shop today and saw the color out in the sun. Just makes you want to lick it lol! (I didn't ;-))

G.

[Ron in SoCal]

G!!! No licking other people's cars....:lol:

[waynieZ]

Definitely going to be Sweet! Very nice.

[Bryan O]

Congrats Brian - a milestone for sure. I stopped by the shop today and saw the color out in the sun. Just makes you want to lick it lol! (I didn't ;-))

G.

G!!! No licking other people's cars....:lol:

:lol: ....my mind just went into the gutter. i'd better keep it clean. this is a family site after all.

Definitely going to be Sweet! Very nice.

Thanks Wayne. Best of luck with your project, too. :thumbsup:

[Bryan O]

Yesterday, Jesus shot Alchemy. Here she is. He'll color sand the car next week. :hail:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/DSCN0570.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/DSCN0558.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/DSCN0571.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/DSCN0573.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/DSCN0586.jpg

[Bryan O]

One thing's for sure, Alchemy doesn't have friendly doors. ;) Can these BOS men make a car or what?

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/DSCN0578.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/DSCN0581.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/DSCN0577.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/DSCN0589.jpg

[Bryan O]

A couple tough youths. :lol:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/DSCN0587.jpg

And if this shot of Jon's paint job on Bob's 911S doesn't impress you then nothing will.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/DSCN0605-1.jpg

[Ron in SoCal]

Can I lick it? :lol: Looks perfect Bro! :thumbsup:

[Ron in SoCal]

A couple tough youths. :lol:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/DSCN0587.jpg



That's Matt's approval fist/face (I think). Just another day for Trev....:)

[Bryan O]

Can I lick it? :lol: :

Greg poked his head mischieviously thru the door of the paint booth. I'm sure he was wanting a taste. :lol:

Looks perfect Bro! :thumbsup:

Thanks Ron!

[Matt@BOS]

That's Matt's approval fist/face (I think). Just another day for Trev....:)

Actually, that is my "hmm... this looks like Bad Penny" face. :lol:

Kidding aside, the paint on the two cars will definitely look different when beside each other.

Matt

[Gandalf]

That's Matt's approval fist/face (I think). Just another day for Trev....:)

Actually - that's Matt asking Trev if he knows anything about auto-electrical.... :rofl:

[waynieZ]

The paint looks sweet. Your moving right along.

[GHOSTDANCER]

Absolutely amazing :wow: :wow: :bow: :cheers:

[Bryan O]

The paint looks sweet. Your moving right along.

Thanks Wayne. Trev and I are anxious to get back in the game. The last couple of months have been a remarkable experience watching the guys do the body and paint. We're hoping to participate with the rest of the build come next week. Then it's off to Eric Thornsen for the interior work. :woot:

Absolutely amazing :wow: :wow: :bow: :cheers:

Thanks Ghost. Yes, those guys are amazing. I can't wait to see the car after it has been color sanded.

[tones2SS]

Very nice. That is going to look killer out in the sun.

[Bryan O]

Very nice. That is going to look killer out in the sun.

Thanks tones. Here's some shots of Alchemy in the sun. Also, a preview of the Fikse wheels and blacked out tail panel.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/DSCN0628.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/DSCN0622.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/DSCN0621.jpg

[DriverzInc]

Wheels look good Bryan! Paint looks amazing, but what else would you expect out Dick and John?

[Bryan O]

We installed the sound deadener. Still have a couple of small areas left to cover. Pics aren't too good.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Sound%20deadener%20and%20Undercoating/DSCN0735.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Sound%20deadener%20and%20Undercoating/DSCN0730.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Sound%20deadener%20and%20Undercoating/DSCN0734.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Sound%20deadener%20and%20Undercoating/DSCN0733.jpg

[Bryan O]

Did some taping and D!ck shot the undercoating:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Sound%20deadener%20and%20Undercoating/DSCN0743.jpg

[waynieZ]

Sweet ! Nice progress.

[Ron in SoCal]

Looks fantastic Bryan! What mat product did you use?

[Bryan O]

Looks fantastic Bryan! What mat product did you use?

Thanks Ron. It's good to be participating in the build again. We used B-Quiet.

[johnny68]

could you please let me know what type/of black paint is that matte/semi gloss etc... what to be specific when telling my painter what i'd like thanks johnJesus has begun to paint. :dance:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/DSCN0530.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop282.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop287.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/pictures%20taken%20by%20BOS/shop288.jpg

[Bryan O]

could you please let me know what type/of black paint is that matte/semi gloss etc... what to be specific when telling my painter what i'd like thanks john

You got it Johnny. I'll get the information from Jesus tomorrow morning and post it for you.

[Bryan O]

could you please let me know what type/of black paint is that matte/semi gloss etc... what to be specific when telling my painter what i'd like thanks john

Hot Rod Black
HR010
Color Horizons Custom Finishes
SEM Products, Inc., Rock Hill, SC 29730
800-831-1122
www.semproducts.com

[johnny68]

thanks brian
john

[Bryan O]

Finished the DSE dash insert.

We measured placement for the gauges, vent, switches and head unit. The tolerances for the gauge holes were very tight so Dick had to cut the crude holes. I smoothed them with a "dental tool". Everything fits nice and snug. We wrapped the gauges with a strip of masking tape to mimic the effect of paint.

Jesus shot the primer, Trevor and I did the wet sanding and then Jesus painted it.

Trevor and I wired the gauges.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Parts%20pics/DSEdashinsert.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Dash%20insert/DSCN0767.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Dash%20insert/DSCN0828.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Dash%20insert/DSCN0836.jpg

Jon is color sanding the car. As soon as he's done I'll post pics. Clayton Machine pedals are installed as well as the Wilwood master cylinder. More updates soon.

[waynieZ]

It looks great nice progress.

[Bryan O]

It looks great nice progress.

Thanks Wayne. Really liking how yours is turning out, too.

Jon finished color sanding and buffing Alchemy today. Only my photography skills could slaughter the spectacular job he and Jesus have done painting the car. :mad:

Here's a cellphone shot. When in low light it really shows the "redish" flop of the BMW Valencia orange paint.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/IMAG0004a-1.jpg

Master cylinder, dash harness and Clayton Machine Works pedals installed.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/DSCN0887.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Paint/DSCN0889.jpg

Tomorrow we'll install the dash insert and begin laying the engine harness wiring.

[waynieZ]

Bryan that color even looks great when its in a shadow! Sweet.

[camcojb]

car looks fantastic! :thumbsup:

[Leadfoot1]

What he said!!!!

Wow! The black under the hood offsets it so well!

At first i tought it was same as Penny, Its a Bimmer colour? Never seen it...

Very nice.

Lead.

[Bryan O]

Bryan that color even looks great when its in a shadow! Sweet.

car looks fantastic! :thumbsup:

What he said!!!!

Wow! The black under the hood offsets it so well!

At first i tought it was same as Penny, Its a Bimmer colour? Never seen it...

Very nice.

Lead.

Thanks guys. I got really lucky with that color. Saw it on a bimmer one day when I was on the way to the shop to tell Jon to paint the car silver with black hockey stripes. Had to have it. :)

[tones2SS]

Killer looking car Bryan.:thumbsup:

[Matt@BOS]

Hey Bryan, I saw your Marquez tail lights are installed. They look good, and remind me of mine, except something is different. Oh, I know, yours are cleaner and shinier.

Matt

[Bryan O]

Killer looking car Bryan.:thumbsup:

Hey Bryan, I saw your Marquez tail lights are installed. They look good, and remind me of mine, except something is different. Oh, I know, yours are cleaner and shinier.

Matt

Thanks.

Imitation is the most sincere form of flattery. ;)

Trev installed those. He's loving working on the car. Got the Marquez side light bezels insalled, too.

[Bryan O]

Shot of Rick's tank and the DSE Quadralink that now has the coilovers installed:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0974.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0971.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0969.jpg

brake lines installed:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0966.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0960.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0959.jpg

proportioning valve installed:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0958.jpg

[Bryan O]

fender extensions and Marquez lower valence and turn signal/ driving lights:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0955.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0954.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0922.jpg

[Bryan O]

Camaro Row:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0929.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0934.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0938.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0950.jpg

That's a beautiful 69 Camaro under the cover. But, I didn't dare take the cover off for pictures. :_paranoid

[tones2SS]

Great updates. Looking good Bryan.

[Ron in SoCal]

That's heaven right there Bro. Your car looks friggin fantastic!

[waynieZ]

I'm with Ron it looks awesome. I love that front valance.

[mexMan]

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0929.jpg
Is that a Camaro over there?

Anyway, I'm guessing Marquez front valance. Me like.

[Gandalf]

Camaro Row:
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0929.jpg


Looks like a Marquez ad :rofl:

[Rybar]

Not sure how I missed this one, but really great build. Car looks fantastic, paint and body look amazing. :thumbsup:

[Bryan O]

Great updates. Looking good Bryan.

That's heaven right there Bro. Your car looks friggin fantastic!

I'm with Ron it looks awesome. I love that front valance.

Not sure how I missed this one, but really great build. Car looks fantastic, paint and body look amazing. :thumbsup:

Thanks guys. We're on the home stretch now and the car should be moving from BOS up to Eric Thorsen for the interior soon. Alchemy will then be complete!! :thumbsup:

I'm really excited now. Two weeks ago Jean, my wife, bought herself a 2011 Challenger SRT8 392 Hemi 6-speed manual. She let's me drive it every now and then. :lol: Just got done teaching Trevor (13) how to drive a stick. Great day to learn. Lots of big empty parking lots. Just don't tell Jean. :lol:

I'm really wanting to drive my Camaro now. I'm not wearing the pants in the family if I'm not driving my own muscle car. :lol:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0929.jpg
Is that a Camaro over there?

Anyway, I'm guessing Marquez front valance. Me like.

Yes sir. That's a very nice Garnet Red 69. Not a PT car but it hauls ass. I shoulda removed the cover for the pics. Jon and Jesus color sanded and buffed it. Really looks nice.

Looks like a Marquez ad :rofl:

:lol:

Happy Thanksgiving. :cheers:

[Ron in SoCal]

Patch are you heading down to Del Mar?

[Bryan O]

I'll be there Sat and Sun. Jean might autocross her Challenger. cya there. :thumbsup:

[Matt@BOS]

Jean might autocross her Challenger. cya there. :thumbsup:

Yes! That would be awesome. You should to just to see who is better.Wish I could take the Mustang out there to give you a little buyer's remorse, lol.

Oh and Bryan, if it is an all years show, make sure to just register the Challenger for the show. It is cheaper than getting tickets for both days and paying for parking.

Matt

[Bryan O]

Fuel lines and fuel filter installed:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Fuel%20lines/IMAG0089.jpg

Trevor helping hook up the transmission:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Engine%20and%20Tranny/IMAG0076.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Engine%20and%20Tranny/IMAG0082.jpg

[tmadden]

Camaro Row:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0929.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0934.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0938.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0950.jpg

That's a beautiful 69 Camaro under the cover. But, I didn't dare take the cover off for pictures. :_paranoid

Camaro heaven

[johnny68]

no wonder i cant find a 69 :hail:
john

[Richio1]

Bryan - I love the story and your build. Congrats on the progress... you are almost there. By the looks of the shop you are in very good hands. Cant wait to see it completed.

[Bryan O]

Please excuse my horrible photography skills.

Jesus did a great job fitting the carbon fiber rear spoiler:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Spoiler/IMAG0106.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Spoiler/IMAG0107.jpg

Eric did a great job installing the DSE anti-roll bar(aka sway bar):

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/DSE%20sway%20bar/IMAG0118.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/DSE%20sway%20bar/IMAG0117.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/DSE%20sway%20bar/IMAG0116.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/DSE%20sway%20bar/IMAG0115.jpg

And I did a great job installing some cool aluminum lug nuts. :rofl:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Wheels%20and%20Tires/IMAG0124-1.jpg

[Bryan O]

Engine mounted. Tranny and headers installed:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Engine%20and%20transmission%20etc/IMAG0134-1.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Engine%20and%20transmission%20etc/IMAG0133-1.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Engine%20and%20transmission%20etc/IMAG0132.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Engine%20and%20transmission%20etc/IMAG0131-1.jpg
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Engine%20and%20transmission%20etc/IMAG0130-1.jpg

I'll be putting on different fuel rails, a Katech coil relocation kit, and new GMPP valve covers soon.

[waynieZ]

You must be pumped being this close! Very Nice...

[Ron in SoCal]

Looks great Bry. :thumbsup: I have not seen how the rear DSE bar looks installed - I still have to put mine on. Seems like it could be one of the lowest parts of the undercarriage?

[tones2SS]

Great updates! Looking good.

[Bryan O]

You must be pumped being this close! Very Nice...

Looks great Bry. :thumbsup: I have not seen how the rear DSE bar looks installed - I still have to put mine on. Seems like it could be one of the lowest parts of the undercarriage?

Great updates! Looking good.

Thanks guys. Yep, definitely pumped Wayne. Soon. :woot:

Ron, that is in fact the lowest part of the undercarriage. Not as problematic as low pipes though. On that note, I should do well with the Hookers. A benefit with the DSE transmission crossmember allows for the exhaust to be placed significantly closer to the body of the car. See the above pic. Thanks for the advice.

[Bryan O]

I don't know what I was thinking with the black headlight doors. :_paranoid Gonna paint them body color asap.

But, I sure do like the Marquez bumper and lower valence.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Grille/IMAG0158.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Grille/IMAG0162.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Grille/IMAG0159.jpg

[Ron in SoCal]

Glad it worked out Bryan! :thumbsup: You can really see how well those headers clear by the rearview shot...

[Richio1]

Looks awesome Bryan. It's great to see the updates. I love the Marquez bumper & valance too. I hope mine turn out as nice.

I agree on the body color headlight doors. Any target completion date?

[Bryan O]

Any target completion date?

Shooting for Good Guys Scottsdale. It will get done when its done. I'd rather do it right than do it quickly. :yes:

The only one more eager than me to drive their car is D!ck. :)

[Rybar]

Car is looking awesome Bryan :thumbsup:

[tones2SS]

Man, that thing is looking bad ass. Looks great Bryan.

[Bryan O]

Car is looking awesome Bryan :thumbsup:

Man, that thing is looking bad ass. Looks great Bryan.

Thanks guys!

Got the headlight doors painted body color. Looks much better. Jesus pulled his hair out trying to fit the passenger side headlight door. He's gonna tweak it some more. Those things are a biotch to get right.

Here's some pics of Alchemy cathin' some rays.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/IMAG0188.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/IMAG0189.jpg

[waynieZ]

It looks awesome....

[56pickup]

Looks great out in the sun! :thumbsup:

[tones2SS]

That looks killer. Very nice.

[Bryan O]

We've made some progress lately.

All the trim pieces have been rechromed and polished. They look great. Can't provide any pics yet because they're still wrapped.

The fuel lines have been completed and Trevor installed new fuel rails and a fuel pressure gauge. He also fit the hood louvers onto the hood which required some tweaking.

Dick found a nice silicon reducer to connect the throttle body to the fresh air intake. It wasn't easy. The diameter goes from 4 1/2 inches on the TB to 4 inches on the FAI and not many around with that combo.

I really like the fresh air intake setups on both Matt's car and Greg's car. So I copied aspects of both of them. :lol: I'll post pictures later. Gonna paint the dual air intake tubes body color. :woot:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Engine%20and%20Tranny/DSCN0999.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Engine%20and%20Tranny/IMAG0237.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Hood/IMAG0199.jpg

We used Marquez CID badges for the fender emblems:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Emblems/IMAG0217.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Emblems/IMAG0216.jpg

Trevor and I are now working on the Anvil closeout panel. We wet sanded it and are going to paint, color sand and polish it. That ought to be fun. Jon cringes when I tell him were gonna be painters. :rofl:

[NvrDun71]

What valve covers are those? I like the clean look without the coil brackets :cheers:

[Bryan O]

What valve covers are those? I like the clean look without the coil brackets :cheers:

Thanks. I like them, too. And they're cheaper than going with the Katech coil relocation kit. Stever Rupp suggested I look into getting a set.

Holley valve covers. Part #241-91. http://www.holley.com/241-91.asp

[Ron in SoCal]

Great update Bry! :thumbsup:

I bet Trev is a better painter than you...:lol:

[Spiffav8]

Oh Yeah! Looks good!!

:thumbsup: :thumbsup:

[Bryan O]

Oh Yeah! Looks good!!

:thumbsup: :thumbsup:

Great update Bry! :thumbsup:

I bet Trev is a better painter than you...:lol:

Thanks guys!

We'll see Ron. Trev said the same thing. So we divided it into halves. One side Trev's. One side mine. May the best man (or boy :lol: ) win.

[Matt@BOS]

Thanks guys!

We'll see Ron. Trev said the same thing. So we divided it into halves. One side Trev's. One side mine. May the best man (or boy :lol: ) win.

I'm going to tell you one last time not to paint. I heard they put something in the paint over at BOS. It makes people grumpy :_paranoid .

Matt

[tones2SS]

Looking good man!

[Bryan O]

Ron Davis radiator and fans, glass, drive shaft, fresh air intake, Borla exhaust, DSE wiper assembly and Optima battery all due to be installed in the next couple weeks. We've got some wiring and chrome plating that needs to be finished as well.

Lots more pics coming soon.

Inspired by Jamess113, Trevor and I cleaned, media blasted and painted the window hardware. It was very easy to remove the gunk using dichloromethane.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Window%20and%20Door%20mechanism%20pieces/DSCN1018.jpg

[waynieZ]

It came out great.

[Bryan O]

It came out great.

Thanks Wayne. Not quite as sexy as working on brakes like you're doin'. :thumbsup: But, I really wanted to get them cleaned up. Especially after I saw Jay's post and pictures. Eric put them to good use today.

All the glass except the windshield was installed. Eric's still gonna tweak the fitment of the door and quarter glass.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Glass/DSCN1046.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Glass/DSCN1056.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Glass/DSCN1062.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Glass/DSCN1063-1.jpg

[Bryan O]

This post is for you Matt. :lol:

Throttle cable, Billet Specialties battery mount and Optima battery installed.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Battery/DSCN1021.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Battery/DSCN1025.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Throttle%20cable/DSCN1051.jpg

[Matt@BOS]

Come on Bryan. You can do better than that. We're all hoping to see video of you in the car "driving," now that you have a seat at the shop.

Don't hold out on us!

Matt

[Gandalf]

OMG - is this car STILL not on the road?? Get it done already - you're missing all the "fun" :soapbox:

G

[Bryan O]

OMG - is this car STILL not on the road?? Get it done already - you're missing all the "fun" :soapbox:

G

:faint:

[waynieZ]

:faint:

I feel your pain Bryan, BUT SHAKE YOUR BUTT I NEED SOMETHING TO BE EXCITED ABOUT :D

[tones2SS]

That is a sweet looking car Bryan.

[Bryan O]

I feel your pain Bryan, BUT SHAKE YOUR BUTT I NEED SOMETHING TO BE EXCITED ABOUT :D

Easy there big guy. My wife and son are giving me strange looks. :lol:

That is a sweet looking car Bryan.

Thanks tones.

==============

Starter and AC condenser installed.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Starter/DSCN1107.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Starter/DSCN1099.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/AC%20condenser/DSCN1091.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/AC%20condenser/DSCN1106.jpg

[waynieZ]

Bryan tell them not to worry your safe.
My daughter's pregnant and she lives in Carlsbad with a mid July due date. Maybe I can sneak away and check your car out. When she got married in 2010 I went to see Matt's car and Penny at BOS. Their work was super.

[Bryan O]

My daughter's pregnant and she lives in Carlsbad with a mid July due date. Maybe I can sneak away and check your car out. When she got married in 2010 I went to see Matt's car and Penny at BOS. Their work was super.

Right on Wayne. I'm happy for your daughter. That's great.

Let me know when you get here and we'll take you by the shop. Friday's are really good. The guys grill up burgers and hot dogs for lunch.

[waynieZ]

I'll start working on Mama now...

[Bryan O]

Got shafted today. :)

DSE wiper motor, oil filter and sending unit installed. Also a shot of the Vintage Air and a good shot of the Clayton Machine pedal assembly.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Drive%20shaft/DSCN1158.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Drive%20shaft/DSCN1155.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/DSE%20wiper%20motor/DSCN1129.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Oil%20filter%20and%20sending%20unit/DSCN1161.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Vintage%20Air/DSCN1114.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Clayton%20Machineworks/DSCN1116.jpg

[Ron in SoCal]

You Dog...:lol:

Looks great Bro! :thumbsup:

[waynieZ]

Looking Good!!

[KPC67]

Looking good Bryan:woot:

[Richio1]

Bryan it is coming together nicely. Hey how are you going to be running the VA hoses? Looks like through the vent opening but are you using a bulkhead behind the fender or did you cut a hole so you could run continuous hoses? I couldn't see anything on the firewall in any of your pics.

Thanks, Jeff

[Matt@BOS]

Bryan it is coming together nicely. Hey how are you going to be running the VA hoses? Looks like through the vent opening but are you using a bulkhead behind the fender or did you cut a hole so you could run continuous hoses? I couldn't see anything on the firewall in any of your pics.

Thanks, Jeff

The shop generally runs all of the lines through bulkheads tucked under the passenger side fender. I think that is what Bryan's car has. I do know that Vintage Air just came out with a circular (rubber/plastic?) plate that allows for you to run the hoses through the firewall.

Matt

[Bryan O]

You Dog...:lol:

Looks great Bro! :thumbsup:

Looking Good!!

Looking good Bryan:woot:

Thanks guys.

The car's close to being finished. If all goes well we should have it at Good Guys Del Mar. Very exciting. But, what's even more exciting is there's a new project about to be launched. Project Genesis. :woot:

Bryan it is coming together nicely. Hey how are you going to be running the VA hoses? Looks like through the vent opening but are you using a bulkhead behind the fender or did you cut a hole so you could run continuous hoses? I couldn't see anything on the firewall in any of your pics.

Thanks, Jeff

Jeff,

Thanks. I'll snap and post some pictures later today that will show what Matt is describing.

[tones2SS]

Bryan, your car is looking sweet. Love that pedal set-up. Keep up the good work.:thumbsup:

[Bryan O]

Bryan, your car is looking sweet. Love that pedal set-up. Keep up the good work.:thumbsup:

Thanks!

[Bryan O]

Bryan it is coming together nicely. Hey how are you going to be running the VA hoses? Looks like through the vent opening but are you using a bulkhead behind the fender or did you cut a hole so you could run continuous hoses? I couldn't see anything on the firewall in any of your pics.

Thanks, Jeff

Here's the photo.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Vintage%20Air/DSCN1183.jpg

[Richio1]

Awesome, thanks Matt & Bryan. Just what I was looking for.

[Bryan O]

Awesome, thanks Matt & Bryan. Just what I was looking for.

You're welcome Jeff.

Clayton Machine Works window cranks and door handles came today. :woot:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Clayton%20Machineworks/DSCN1197.jpg

[Bryan O]

Eric installed the Ringbrothers clutch reservoir. Very cool.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Clutch%20reservoir/DSCN1217.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Clutch%20reservoir/DSCN1211.jpg

He also put on the rear bumper.

I really like how Mark Stielow blacked out the tail panel on Camaro X at the line an inch or so below the bumper.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Bumper/DSCN1227a.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Bumper/DSCN1229.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Bumper/DSCN1236.jpg

[waynieZ]

Bryan that is looking great! :cheers:

[KPC67]

The car is coming along nicely. Alot of cool cars have come out of that shop.
No intention of jacking the thread here but who's clutch cylinder is that?

[Bryan O]

The car is coming along nicely. Alot of cool cars have come out of that shop.
No intention of jacking the thread here but who's clutch cylinder is that?

Thanks.

Ringbrothers. :thumbsup:

[KPC67]

Thanks.

Ringbrothers. :thumbsup:

They make the cylinder and the reservoir?

[Bryan O]

They make the cylinder and the reservoir?

Sorry. My bad. :(

GM cylinder.

[tones2SS]

Looking good Bryan.

[70rs]

Time for a new avatar picture? It's turning out great!

[Spiffav8]

Time for a new avatar picture? It's turning out great!

I agree...time for an updated avatar. :unibrow:

[Bryan O]

Time for a new avatar picture? It's turning out great!

I agree...time for an updated avatar. :unibrow:

Thanks guys. I'm sticking with the avatar though. That picture is worth more to me than my car. It's a picture of my son Trevor in his 67 just before he and I began disassembling the car and getting it ready to take to Best of Show.

Trevor is going to begin his Lat-g build thread soon. Probably later today. Project Genesis. :woot:

[waynieZ]

Way to go Trevor.. Another car guy. SWEET!

[Bryan O]

Marquez door jam vents and stikers, Budnik steering wheel, antenna, mirror, and quarter louvers installed.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Quarter%20louvers%20and%20door%20jam%20vents/DSCN1372.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Steering%20wheel%20and%20column/DSCN1365.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Quarter%20louvers%20and%20door%20jam%20vents/DSCN1361.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Quarter%20louvers%20and%20door%20jam%20vents/DSCN1358.jpg

[Bryan O]

Here's a pic of the exhaust tips. Really like how they turned out. I'll get more pics of the full exhaust system tomorrow when she's up on the lift. Went with Magnaflows.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Exhaust/DSCN1351.jpg

[awr68]

Looking great! I like the green car too....:yes:

[Bryan O]

Looking great! I like the green car too....:yes:

Thanks.

Yea, that's Eric's car. The green (Synergy?) is awesome. The car looks killer since he blacked out his wheels. Matt's right. The shop looks like a bag of skittles. :lol:

[waynieZ]

I love that picture from the back the color with the blacked out tail panel and the lights, It really looks great. Whose lights are those? When I started buying part for my car I bought an NOS set and now I like these better.
Very Nice.

[Ron in SoCal]

Wow Bri...:thumbsup:

Tell Trevor I like his taste in parts! :lol:

[Bryan O]

I love that picture from the back the color with the blacked out tail panel and the lights, It really looks great. Whose lights are those? When I started buying part for my car I bought an NOS set and now I like these better.
Very Nice.

Marquez. :thumbsup:

http://marquezdesign.com/store/parts/chevrolet/camaro/69-camaro-rally-sport-taillights.html

[Bryan O]

Wow Bri...:thumbsup:

Tell Trevor I like his taste in parts! :lol:

:lol:

Yea, he's gonna have to throw a lot of newspapers to get those parts on his car. :lol:

[John510]

Its looking really good. I wish mine was this far along.

[Matt@BOS]

:lol:

Yea, he's gonna have to throw a lot of newspapers to get those parts on his car. :lol:

Which parts are we referring to? Two years from now I will finally be able to make a judgement on the trickle down theory if Trevor's car has Hooker headers, Fikse wheels, a 402 LS engine, etc.

Matt

[Bryan O]

Which parts are we referring to? Two years from now I will finally be able to make a judgement on the trickle down theory if Trevor's car has Hooker headers, Fikse wheels, a 402 LS engine, etc.

Matt

Well one thing's for sure, I'm not giving him my Turnkey engine. Those LS2s are known to bust tie-down straps while on the dyno. And that's just too much power for a youngster. :rofl:

[Bryan O]

Here's some shots of the exhaust that Jimmy Warner (Warner's Mufflers in Oceanside :thumbsup: ) installed:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Exhaust/DSCN1437.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Exhaust/DSCN1434.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Exhaust/DSCN1432.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Exhaust/DSCN1440.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Exhaust/DSCN1429.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Exhaust/DSCN1400.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Exhaust/DSCN1414.jpg

[Rick D]

Wow Bryan you most like a little kid this car is getting so close? And is it coming out so sweet :thumbsup: . Any idea when you should get to drive it?

[waynieZ]

It looks great now when you have a chance we need to hear it!

[Bryan O]

Wow Bryan you most like a little kid this car is getting so close? And is it coming out so sweet :thumbsup: . Any idea when you should get to drive it?

It looks great now when you have a chance we need to hear it!

Thanks guys. Yea, I'm definitely excited to get her on the road. Car goes up to Eric Thorsen Monday for the interior. I just made a quick road trip to Phoenix to pick up my radiator from Ron Davis.

Should be able to drive it in about 2 1/2 weeks. Good Guys Del Mar if all goes well. :woot:

I'll post a video. :thumbsup:

[BBC71Nova]

Looking good. Can almost see the finish line I bet :)

What wheel and tire did you end up going with?

[Bryan O]

Looking good. Can almost see the finish line I bet :)

What wheel and tire did you end up going with?

Thanks. I went with 18 inch Fikse FM5s. Gloss black centers with polished hoops. 9inch on the front and 11inch in back. Nitto NT555s. 275s and 395s.

Is there a such a thing as a finish line with these cars? Not from what I've seen. So, I guess I'm almost to the starting line. :lol:

[Ron in SoCal]

Thanks. I went with 18 inch Fikse FM5s. Gloss black centers with polished hoops. 9inch on the front and 11inch in back. Nitto NT555s. 275s and 395s.

Is there a such a thing as a finish line with these cars? Not from what I've seen. So, I guess I'm almost to the starting line. :lol:

395s Bryan? :D

[Matt@BOS]

395s Bryan? :D

Come on Ron! The man just went to Arizona and back in less than 12 hours! He's gotta be tired. Jeez :D

What Kind of person would do something like that??

Matt

[Bryan O]

395s Bryan? :D

What's a digit or two between friends. :lol:

[tones2SS]

Great stuff Bryan. Looks really good.
Love the wheel choice!:thumbsup:

[Bryan O]

Alchemy was delivered today to Eric Thorsen for the interior work. :thumbsup:

Some pictures of the Ron Davis radiator, Budnik steering wheel, door handles and lock, cowl panel, windshield and windshield trim install. If everything goes well, when she gets back BOS will take a couple days to finish things up and we should be able to have the car at GG Del Mar. :woot:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Cowl%20panel%20and%20windshield%20and%20trim/DSCN1462.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Ron%20Davis%20radiator/DSCN1453.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Door%20handles%20and%20key%20lock/DSCN1450.jpg

A good shot just before being shipped off for the interior:

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN1468.jpg

[randy]

how much did that radiator cost ya

[Richio1]

Looks sweet

[waynieZ]

Definately lookin good, getting close now....

[John510]

Wow. Almost there!

[Ron in SoCal]

That'a a homerun B! Gaps, lines, paint, theme...:hail: :hail: :hail:

Tell D*ck his radiator plumbing skills are slippin' :lol:

[mrr1999]

Looks incredible! Can't wait to see the interior.

[tones2SS]

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN1468.jpg

Man, that looks killer!

[Bryan O]

Looks sweet

Definately lookin good, getting close now....

Wow. Almost there!

Looks incredible! Can't wait to see the interior.

Man, that looks killer!

That'a a homerun B! Gaps, lines, paint, theme...:hail: :hail: :hail:

Tell D*ck his radiator plumbing skills are slippin' :lol:

Thanks alot guys!! I'm really itchin' to drive the car but in a strange way I'm kinda bummed. The process of building/restoring the car is coming to a close and it's been an incredible experience for Trevor and me. Of course, driving the beast is gonna be loads of fun, too. But, I won't be competing at GG Del Mar. D!ck made me promise not to drive it too hard for the first 500 miles. He knows how I drive Jean's Challenger. :lol:

Is there a RTTC2 this summer? :woot:

[Fikse Wheels]

I really like the color combination. May I use some of your pictures?

Thanks alot guys!! I'm really itchin' to drive the car but in a strange way I'm kinda bummed. The process of building/restoring the car is coming to a close and it's been an incredible experience for Trevor and me. Of course, driving the beast is gonna be loads of fun, too. But, I won't be competing at GG Del Mar. D!ck made me promise not to drive it too hard for the first 500 miles. He knows how I drive Jean's Challenger. :lol:

Is there a RTTC2 this summer? :woot:

[Matt@BOS]

Thanks alot guys!! I'm really itchin' to drive the car but in a strange way I'm kinda bummed. The process of building/restoring the car is coming to a close and it's been an incredible experience for Trevor and me. Of course, driving the beast is gonna be loads of fun, too. But, I won't be competing at GG Del Mar. D!ck made me promise not to drive it too hard for the first 500 miles. He knows how I drive Jean's Challenger. :lol:

Is there a RTTC2 this summer? :woot:

Bryan, we need to teach you and Jean to drive first, and maybe Trevor too, while we're at it. We all know he is doomed to fall in love with speed. There is no way he didn't get those genes. Didn't you tell me you got 19 speeding tickets in a year when you were a kid in Tucson? There are a bunch of shows and events this summer, and we'll make sure to get you over to something, even if it is just a little Good Guys "peanut" autocross up in Pleasanton!

Matt

[Bryan O]

I really like the color combination. May I use some of your pictures?

Thanks.

Certainly, you can use my pics. If you wait a week or so I may even have one with a hood on the car. :lol:

[Bryan O]

Didn't you tell me you got 19 speeding tickets in a year when you were a kid in Tucson?

Technically, it was Pima county 'cause I lived outside the Tucson city limits. Got to know the entire Sheriffs Dept on a first name basis. :lol: And it was my first year of driving. Took me awhile to learn how to slow down that '71 Firebird. :_paranoid

[Ron in SoCal]

Technically, it was Pima county 'cause I lived outside the Tucson city limits. Got to know the entire Sheriffs Dept on a first name basis. :lol: And it was my first year of driving. Took me awhile to learn how to slow down that '71 Firebird. :_paranoid

Atta Boy...:thumbsup: :D

[Bryan O]

Here's a shot of the fresh air intake in the paint booth. Can't wait to see this installed. :yes:

Haven't seen the car in 10 days! Saturday I'll have pictures of the interior. We're going up to see Eric's work.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Fresh%20air%20intake/IMAG0270.jpg

[Bryan O]

John, here are the two pictures I spoke of in your build thread:

this was taken mid December 2011:
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN0984.jpg


this was taken mid March 2012:
http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN1465b.jpg

[John510]

Your right it did settle. Your car looks awesome by the way!! I love the color

[Bryan O]

Your car looks awesome by the way!! I love the color

Thanks John.

Here's a couple of shots of the trunk after Eric Thorsen worked his magic. Obviously, we'll be painting the lock mechanism black. I forgot to take pics of the completed rear seat and package tray. :mad: Oh well. I'll get full interior pictures Monday when the car arrives back at Best of Show.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Trunk/DSCN1469.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Trunk/DSCN1470.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Trunk/DSCN1471.jpg

ps....Chris, Eric made a real Balzy headliner for me. :lol: Imitation is the most sincere form of flattery. :yes:

[Cris@JCG]

Bryan- You still not done with this car!:D

Eric Thorsen does some pretty good interior work... I like what he did with your trunk.. I need to get BB back to him to finish out the trunk..

Thanks John.

Here's a couple of shots of the trunk after Eric Thorsen worked his magic. Obviously, we'll be painting the lock mechanism black. I forgot to take pics of the completed rear seat and package tray. :mad: Oh well. I'll get full interior pictures Monday when the car arrives back at Best of Show.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Trunk/DSCN1469.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Trunk/DSCN1470.jpg

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Trunk/DSCN1471.jpg

ps....Chris, Eric made a real Balzy headliner for me. :lol: Imitation is the most sincere form of flattery. :yes:

[John510]

wow beautiful trunk!

[waynieZ]

Looking Good!

[Bryan O]

Looking Good!

Thanks Wayne.

Here's some interior shots. We still have to put on the visors, rear view mirror, window and door cranks.

http://i29.photobucket.com/albums/c299/boates/911%20Photos/Interior/DSCN1478.jpg

http://i29.photobucket.com/albums/c299/boates/911%20Photos/Interior/DSCN1482.jpg

http://i29.photobucket.com/albums/c299/boates/911%20Photos/Interior/DSCN1488.jpg

http://i29.photobucket.com/albums/c299/boates/911%20Photos/Interior/DSCN1496.jpg

http://i29.photobucket.com/albums/c299/boates/911%20Photos/Interior/DSCN1494.jpg

http://i29.photobucket.com/albums/c299/boates/911%20Photos/Interior/DSCN1506.jpg

[Bryan O]

http://i29.photobucket.com/albums/c299/boates/911%20Photos/Interior/DSCN1521.jpg

http://i29.photobucket.com/albums/c299/boates/911%20Photos/Interior/DSCN1511.jpg

http://i29.photobucket.com/albums/c299/boates/911%20Photos/Interior/DSCN1523.jpg

http://i29.photobucket.com/albums/c299/boates/911%20Photos/Interior/DSCN1524.jpg

http://i29.photobucket.com/albums/c299/boates/911%20Photos/Interior/DSCN1525.jpg

http://i29.photobucket.com/albums/c299/boates/911%20Photos/Interior/DSCN1535.jpg

[Ron in SoCal]

That's money, Holmes...:cool: :D

[radrambler]

Bryan

Great to hang out at BOS with you today. enjoyed it and thanks for the pizza
:cheers:

Guys this car looks super slick..


Tom

[Al Moreno]

That's money, Holmes...:cool: :D

X 2 :thumbsup:

[waynieZ]

Bryan it looks great, they did a nice job. With the bolsters on those seats they'll definitely hold you in place. Exciting stuff So Close now!

[Richio1]

Wow looks great. I love the Clayton pieces too. Very sharp!

[John510]

:cheers:

[tones2SS]

Looking good Bryan!

[Bryan O]

That's money, Holmes...:cool: :D

Bryan

Great to hang out at BOS with you today. enjoyed it and thanks for the pizza
:cheers:

Guys this car looks super slick..


Tom

X 2 :thumbsup:

Bryan it looks great, they did a nice job. With the bolsters on those seats they'll definitely hold you in place. Exciting stuff So Close now!

Wow looks great. I love the Clayton pieces too. Very sharp!

:cheers:

Looking good Bryan!

Thanks guys. It's been a great experience and building this car is almost complete. Barring an act of God, I think it will be wrapped up tomorrow evening. :dance:

Now we're moving on to the most important build. Trevor's car Genesis. :woot:

Here's a cellphone video. The sound does not do her justice. Click the image.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Videos/th_VIDEO0004.jpg (http://s29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/Videos/?action=view&current=VIDEO0004.mp4)

[John510]

YEAH!!!!! Congrats!!!!!!!!!

[Bryan O]

Alchemy is complete. :thumbsup:

I want to thank Dick, Jon, Jesus, Eric and Dean for doing such a great job on my car. The BOS men are amazing. :bow:

Here she is just before taking her down the Del Dios Highway to Good Guys at Del Mar. I am still in shock. The car is a phenomenal ride. Drives like it's on rails.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN1588.jpg

Here she is parked at home for the first time.

http://i29.photobucket.com/albums/c299/boates/Dads%2069%20Camaro/misc/DSCN1605.jpg

Notice the lack of a front spoiler. My wife was a little aggressive around a corner that had a dip. I ordered a few replacement spoilers. Something tells me we're gonna need extras around. :lol: The car is sitting really low at the moment. It has settled a lot. We're going to raise it an inch or so soon.

[youthpastor]

Man I love the fit and finish!

I had a local carbon guy make up one based off of a Rushforth design that is an inch shorter for that very reason

http://i250.photobucket.com/albums/gg268/LS168/68%20Trans%20Am%20z28/176.jpg
he has the mold to make more if you are interested- Chris

[radrambler]

http://i907.photobucket.com/albums/ac278/kustomcarguy/bryan69.jpg
Bryan and his son cruising into Del Mar Goodguys Today
http://i907.photobucket.com/albums/ac278/kustomcarguy/bryan692.jpg

:thumbsup:
Tom

[John510]

:hail: :thumbsup: :hail: :thumbsup: :bow: