Ironworks Bring No brainer products to market for the Home builder.

[ironworks]

Well after enough phone calls from you guys here on LAt-g for some of the slick brackets we make for shop projects we finally going to stock some of these parts to sell to the home builder. These brackets are all laser cut and designed with long tabs to be trimmed to fit to your desired shape for the location you choose for mounting difficult parts like a GM LS1 Engine Control Unit.
http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsNovember2010028.jpg

Or an LS2-LS7 Engine Control unit. ( $25 )
http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsOctober2010047.jpg

We also added a fuse panel shelf that has a tab to mount and GM style fuse panel to also. ( $45 - ECU mount and fuse panel shelf with mounting tab )
http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsNovember2010009.jpg


We have ISIS mounting plates in steel and Aluminum ( $15 buck each )
http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsOctober2010080.jpg
http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsOctober2010081.jpg


Transmission control unit mounting brackets ( $25 for the Unit with mounting holes and 40 for the 2 piece TCI style mount )
http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsNovember2010019.jpg
http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsNovember2010016.jpg

FAST XFI and XIM Mounting brackets ( $25 Each or $35 for the Combo mount)
http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsNovember2010012.jpg

Lokar E brake mounting bracket - ( $25 )
http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsOctober2010048.jpg

All parts that need to be welded are unwelded so you can modify position if desired. Plus all these parts fit in a Flat rate shipping box from USPS. 14.95 ships all that fit in one box

[James OLC]

Awesome idea buddy - great work!

[tones2SS]

Awesome stuff Rodger.:yes:

[JamesJ]

That is real nice of you to take the time and energy make some things that wont make you a bunch of money but help some people out.

[rjsjea]

Nice...PM sent

[rjsjea]

Already received my brackets.....thanks

[ironworks]

Keep me posted on the Mopar ECU stuff you wanted.

Thanks for posting

[DRJDVM's '69]

Rodger
Do you have a pix of the "combo" bracket for the xfi/fast stuff? Ideally I want to mount both computers to one bracket

[awr68]

Great idea and pricing Big Guy! :thumbsup:

[ironworks]

All this good price guy make me think one of two things, either it is a really nice part or I need to raise my prices.

Here is a FAST bracket but my DEMO ECU's are in the trailer. Here are also some new Coil brackets for the LS2 and later engines. I make 4 coil brackets and 2 coil brackets. The 2 coil brackets are way cheaper because the hardware is so expensive on the 4 coil brackets. I will have pricing on everything next week. The XFI - XIM bracket is 40 bucks.

http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsNovember2010050.jpg
http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsNovember2010051.jpg
http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsNovember2010048.jpg

Oh and the gas pedal brackets I have been promising
http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsNovember2010047.jpg
http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsNovember2010046.jpg

[96z28ss]

All this good price guy make me think one of two things, either it is a really nice part or I need to raise my prices.

Here is a FAST bracket but my DEMO ECU's are in the trailer. Here are also some new Coil brackets for the LS2 and later engines. I make 4 coil brackets and 2 coil brackets. The 2 coil brackets are way cheaper because the hardware is so expensive on the 4 coil brackets. I will have pricing on everything next week. The XFI - XIM bracket is 40 bucks.

http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsNovember2010050.jpg
http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsNovember2010051.jpg

You do know that will only work for the LS2 LS3 LS9 coil. The LS7 coil is different and requires a different spacing.
Just thought I'd help

[ironworks]

We now have the MAST ECU bracket as well.

http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsJanuary2011007.jpg

[Gandalf]

Rodger - just wanted to say thanks for the brackets for my ISIS modules, ECU and LS7 Coil Packs! The step-down side bracket for the master fuses is a trick addition. Awesome work! My DBW pedal is different but we can make this bracket work. I will shoot you some pics of the pedal later this week and hopefully some installed pics of them all soon. Saved me making all these by hand and there is no way I could have made them anywhere near as nice (I don't have one of those fancy Laser Cutters at home :-)

Thanks again for the great products and super fast turn around!

G.

[Cris@JCG]

I got a set of brackets for ECU & fuse box from Rodger also... Worked out great!

[ironworks]

Thanks Guys these parts are super simple in Solidworks. I spend most of my day behind my Giant computer screen designing parts for all the projects we have going on in the shop.

We have coil brackets, engine ecu mounts, trans TCU stuff, Fuse panel parts, ISIS parts, Just lots of parts to make our life and if we sell them to you, your life easier.

I have had guys tell me I saved them 2 or 3 nights in the garage by just giving them something way nicer then they could have made by hand and for probably less money and way less time.

[scherp69]

Roger, I have a question about the ebrake bracket. I was going to use a floor mount ebrake, but I like the idea of the floor mount. I've already done the under side of my car so I don't want to have to a bunch of fabricating to the floor, but don't mind some patch up work if I have to respray areas that were welded. With using your bracket, what else does it take to hook the ebrake handle up? Also...any plans on making a bracket for the Mast ecu and and a AAW highway 22 harness? One last question....have you come up with pricing for the 4 coil brackets yet? Oh and very nice work btw. Thanks in advance.

[ironworks]

If you scroll up 4-5 posts you can see the MAST ECU mount.

The ebrake mount is supposed to make this easier. Funny thing is, I completely spaced the ebrake on our own project, so Kenny did this.
http://www.lateral-g.net/forums/showpost.php4?p=327365&postcount=96

My bracket would have worked perfect for this.

I also have a bracket for the AAW harness we used on this Goodguys Giveaway car.

http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsAugust2010033.jpg

Let me know if you have any other questions.

[Blake Foster]

coil mount brackets for the LS7 coils

the other brackets lok Awesome!! and very well designed. nice work

not trying to hijack the thread by any means just didn't notice if you have an ls7 mount.

[ironworks]

coil mount brackets for the LS7 coils

the other brackets lok Awesome!! and very well designed. nice work

not trying to hijack the thread by any means just didn't notice if you have an ls7 mount.

Yes we do, I have had them for a few weeks. I have sold some a half dozen already.

We have LS1, LS2-LS3, and LS7 coil brackets. In a couple different configurations.

[scherp69]

If you scroll up 4-5 posts you can see the MAST ECU mount.

The ebrake mount is supposed to make this easier. Funny thing is, I completely spaced the ebrake on our own project, so Kenny did this.
http://www.lateral-g.net/forums/showpost.php4?p=327365&postcount=96

My bracket would have worked perfect for this.

I also have a bracket for the AAW harness we used on this Goodguys Giveaway car.

http://i616.photobucket.com/albums/tt248/ironworksspeed/Hot%20Rod%20Fab%20Parts/ShopPicsAugust2010033.jpg

Let me know if you have any other questions.

Thanks Roger. I assume then once you have the pattern in the computer, you can cut whatever combination a customer wants on one panel. For example, to do one side Mast and the other AAW. One other question...will the coil brackets work with L92 coils?

[ironworks]

Doing the combo your talking about should be easy. I'm not sure what the L92 coil spec is. You can post a picture of what you have and we can go from there.

[Blake Foster]

WEll There you go then!!

[96z28ss]

One other question...will the coil brackets work with L92 coils?


which coil does it looks like.
If its the one with the heatsink on the coil, I make a bracket for those.

[Tom.A]

Got my brackets Today. They look great :thumbsup:

[scherp69]

which coil does it looks like.
If its the one with the heatsink on the coil, I make a bracket for those.

I checked today...looks like the brackets that Roger has will work for me. I have these:

http://i222.photobucket.com/albums/dd68/scherp69/P1000772.jpg

I'm confused though, I thought L92's came with truck coils. Was surprised to see I have these ones.

Roger...did you figure out a price for the 4 coil mounts?

[ironworks]

I checked today...looks like the brackets that Roger has will work for me. I have these:

http://i222.photobucket.com/albums/dd68/scherp69/P1000772.jpg

I'm confused though, I thought L92's came with truck coils. Was surprised to see I have these ones.

Roger...did you figure out a price for the 4 coil mounts?

90 bucks plus 15 for shipping with delrin spacers.

[JUSTANOVA]

nice, i will be needing some of these in the near future, you just saved me a bunch of fab work that would look mediocre at best next to that stuff.

any plans on doing a bracket similar to the lokar ebrake for a b&m megashifter? maybe diff height ones for diff applications. I could use something like that in at least one project at the moment.

[ironworks]

nice, i will be needing some of these in the near future, you just saved me a bunch of fab work that would look mediocre at best next to that stuff.

any plans on doing a bracket similar to the lokar ebrake for a b&m megashifter? maybe diff height ones for diff applications. I could use something like that in at least one project at the moment.

I have tried to make the brackets extra long so that most any guy could trim to fit to length.

If you send me the shifter I can make the bracket.

[scherp69]

Got the brackets today Roger. They look amazing. I'm so glad I didn't try and make some myself. Once I have a Highway 22 kit, I'll let you know for the other bracket. It likely won't be until spring though. If you get your hands on one before then, let me know as I'd love to get one. Thanks again.

[ironworks]

Brent Dupont is supposed to send me his to do in the next few weeks so we might have it by then. Thanks again

[Ricochet]

Rodger/Sherp69,

I'll just wait until I bring the car down to you next month. I'll bring the coils, Hwy 22 Kit, Big Stuff ECU, and a few other items.

Thanks-
Brent