Coil pack are relocated now I need spark wires?

[RBR]

I had to relocate my coil packs on my LQ9. I'm having trouble finding sparkplug wires. Stock are not long enough and I'm not sure about a universal kit. The coil pack ends are different then my old SBC with MSD wires.
:lateral:Does anyone know of a kit that has the right ends for the coil packs?

[68protouring454]

msd makes the crimp on ends and has the correct boots, from there you just buy a roll of there wire and make them yourself with a crimper.

[camcojb]

I actually used a universal HEI cut to fit wire set for mine; the HEI clips needed to be slightly crimped smaller and worked perfect, very simple.

Jody

[RBR]

Thanks for the replies guy's.
Hi Jody, hope all is well! I was looking at a HEI universal kit at kragens today and the ends looked alot different then what the stock wires had. I found an old post you made and thats what made me look at the HEI set up. Thanks again for the reply.
I have to go and wait for the the Big Brown truck now! My wiring harness is coming from John at Speartech today:thumbsup:

['02ta]

Just get a set for an LT1 they have the same ends.

[96z28ss]

I make coil relocation kits and this is the kit I recommend for the brackets. MSD part number 32079

[camcojb]

I make coil relocation kits and this is the kit I recommend for the brackets. MSD part number 32079
nice, gonna need a set of those in the future.

Jody

[Mike Norris]

The MSD 32079 kits work great.

[XcYZ]

The MSD 32079 kits work great.

That's what I used. :cheers: