Log in

View Full Version : Air Ride system


Hemi Nova
09-05-2010, 03:42 PM
Change in plans for my project.

I have everything needed to install a complete air ride system. All parts are new other than being used for mock up purpose.

1. 2-five gallon steel tanks.
2. 2- Viair 400c air pumps.
3. 4-Asco industrial air valves, 1/2" ports.
4. Airlift Corporation Easy Street Digital Controller.
5. 2-SKW 1010 Air Ride Technologies Shockwaves single adjustable shocks for the front.
6. 2-SKW 9000 Air Ride Technologies Shockwaves, single adjustable shocks for the rear.
7. Teflon Braided lines with crimped ends to plumb the system and all AN fittings.

$2200 or best offer.

Pictures are here.
http://rides.webshots.com/album/574197910QGFkpF



Located in St. Pete, Fla

Hemi Nova
09-10-2010, 12:19 PM
New price $1800.
Need to move this to buy other parts.

64skylarkls1
09-14-2010, 08:32 PM
Was this purchased as a complete kit? What cars does it fit?

Thanks

Ron in SoCal
09-14-2010, 10:41 PM
Just a guess here -- Nova?

Hemi Nova
09-15-2010, 04:08 AM
It was not bought as a complete kit from one vendor. I bought 4 rebuildable industrial vavles so that i could mount them to the two tanks. I was unimpressed with Air Ride's digital controler at that time so i bought the Air Lift system. The pumps are the better Viair ones that Air Ride recommends. It's not that cheap junk that's all over the truck magazines.

The system was put together for my pro street 69 Nova. Stock front subframe and a ladder bar rear suspension. I see no reason for it not too work an A Body. I'm sure there would be some fabrication involved but nothing major.

It's all on EBay now.
http://cgi.ebay.com/ebaymotors/Complete-Air-ride-suspension-system-/170540054927?pt=Motors_Car_Truck_Parts_Accessories&hash=item27b4fab98f

64skylarkls1
09-19-2010, 06:49 PM
Was this system ever completely hooked up and tested? How old are the Shockwaves? Do you have directions for hooking it all up?

Thanks

Hemi Nova
09-20-2010, 05:55 AM
The system was installed and plumbed. I filled the air tanks with the shop compressor and operated the system to check for leaks and make sure it all worked. The digital controller has never been wired to the system. I used a rechargable drill battery to operate the air vavles.

I have the paper work for the Shockwaves and the controller. The other parts did not come with paper work.

Most of the parts are about 5 years old. They were removed and stored in their orginal boxes after the system was checked out. That has been over 3 years aog now. I have not touched the Nova since May 07. I have gone through cancer treatment, getting married and buying a house since that time. It's now time to get the car running and driving. I have to sell off parts to make that happen. That is the only reason i am selling these parts. If i can't move them i will install them and finding something else to try and sell.

Hemi Nova
09-20-2010, 05:22 PM
Sold.