PDA

View Full Version : Wondering what gear ratio to run?


aany001
09-02-2010, 08:19 PM
I have a 69 Camaro with 2001 LS1 T56 combo and 335 30 18 tires mounted on 12" rims. What gear ratio should I go with? I will mostly be driving around town and highway cruises with the family and not out racing.I was thinking either 342 or 373. What do you guys think??
thanks
Steve

Z06vette
09-02-2010, 09:15 PM
I'd go 373, 6th gear sort of lugs with 342 unless your buzzing 90-100mph. 410 isnt even that bad.
Scott

ccracin
09-03-2010, 05:59 AM
I'm not sure about the Chevy rears, but if you are using a 9" Ford the 3.89 is a good choice with an overdrive tranny. :thumbsup:

hifi875
09-03-2010, 07:10 AM
3.89-4.10 ls motors like to rev. and with a 6sp you have plenty of overdrive.

CamaroAJ
09-03-2010, 07:27 AM
http://www.5speedtransmissions.com/gear_calculator.html

GregWeld
09-03-2010, 10:11 PM
I'm running 3:73's in my Nomad - Ford 9" - 700r4..... 26" tall tire.... LOVE the combo

Van B
09-03-2010, 10:49 PM
Just changed to 4:10 from 3:90 with a 315/30 18 tire. 6th is comfortable at 70-75 or so. I like it so far.

SR71
09-04-2010, 11:20 AM
if your cam has any lope at all, 3.73's with 26" tires and 4.10's with 28" tires.

I have 3.73's with 28" tall tires and 6th bucks at light throttle below 70 mph behind my old school 350. of course I have rhs vortec heads on it along with the small comp thumpr cam. I'm going to 4.10's in the next month or so. a 4.30 was actually my first choice but they are not available for 3 series 12 bolt carriers.

Rybar
09-04-2010, 11:55 AM
I'm running 3.73's I wouldn't go any less, LS motors like to rev.

SR71
09-05-2010, 08:09 AM
correction, after crunching the numbers, I'm going to go with a 4.56 gear this time. my 28" tall tires have everything to do with this call. yes, I took the driveshaft critical speed into consideration and I am safe.