lt1 heads on old 350

[XTRMEASURES]

i have an old 350 4bolt block that i plan on building this summer.
now a buddy has an lt1 engine at my shop and we were talking about maybe useing the heads and Intake manifold.
the thing i want to do is make it a fuel injection style engine, so he's goin to sell me the parts i need if it can be done.



jamie

[camcojb]

It would require a LOT of work to get them on there. The water jackets are completely different so they'd have to be welded up and re-machined. Much less expensive to go a different direction.


Jody

[XTRMEASURES]

thanks that what i needed to know

[Derek69SS]

It would require a LOT of work to get them on there. The water jackets are completely different so they'd have to be welded up and re-machined. Much less expensive to go a different direction.Will the LT1 intake will bolt to conventional SB heads?

[96z28ss]

they will bolt up if you modify the bolt holes on the intake
But also remember that the intake is a dry intake so coolant doesn't flow through it so you have to re-route coolant.

Also the LT1 heads are reverse flow heads.