PDA

View Full Version : "FUeL" RENDERINGS!!!!!!!

Datsbad
12-25-2005, 01:43 PM
I wanted to share a rendering of what Kris and I are working on . It is not done but I wanted to show you guys what I am working on and what you WILL see at the 2006 Powertour . My one employee that is helping the most and myself are going to drive it to Florida and then join in on the powertour for the ride home to NJ , then back 4-hrs west to our town . Should be about 3,000 miles total !

This is a car I plan to race in some events that we sponsor at some tracks local . The engine (LS2 402 cid)will produce in the 550 rwhp range and we are using the Harrop Huricane intake from Australia.

The car has 18" HRE 843r wheels anodized black 18X8.5'S AND 18X12's Pirrelli P-Zero's , full Baer brakes 6 piston front and rear , Full chromoly roll cage , Fire supression system, All of DSE's front and rear coilover suspension, tremec 6 speed , 9" alum center rear , DSE subframes, cneter mount emergency brake, and some other custom touches not shown in the renderings . :unibrow:

I figure total time on this car we are working with is 7 months :willy:

Thanks for looking , Jason
ProdigyCustoms
12-25-2005, 02:46 PM
That seems doable. Gotta love black. Are you running 6 pistons on the rear? See ya at Power Tour
Datsbad
12-25-2005, 02:49 PM
Hey Frank ! . Yeah it shouldnt be to bad to get it done . but its not the only car we are working on .

As for the brakes yes 6 pistons on the rear with internal parking brake assembly.
Definately see you there !
69Nova
12-25-2005, 10:03 PM
I love the black on black combo :thumbsup: . Good luck with your project and see you on the power tour.
PairOf69's
12-25-2005, 10:04 PM
I'm really looking forward to see this thing on the tour, got any details on the e-brake? keep up the good work! :thumbsup:
jack67rs
12-25-2005, 11:23 PM
Very nice, really liking the center of the wheels done in gray or darker colors.
XcYZ
12-26-2005, 08:48 AM
Nice! :yes:
ProdigyCustoms
12-26-2005, 10:37 AM
Are you going to be able to hold off the rears to keep proper bias?
Blake Foster
12-26-2005, 11:57 AM
That looks almost exactly like the drawing we have of the one we are doing right now except for the RS grill and our wheels are a brushed aluminum finish on the centers but same wheels. that will be a bitchi'n car. good luck on the build
Datsbad
12-26-2005, 02:03 PM
Are you going to be able to hold off the rears to keep proper bias?


I think so , keep in mind that the Baer 6 piston rears are not just fronts moved to the rear . They are a totally different calipers with different bore sizes than front.
Huxsol81
12-26-2005, 02:34 PM
Good looking ride dude! :thumbsup:
Kendall Burleson
12-26-2005, 08:09 PM
That car is going to be Slick in black.almost Steath! :hail:
Datsbad
12-26-2005, 09:10 PM
That car is going to be Slick in black.almost Steath! :hail:

Thats what I am going for . Thanks for all the compliments . :thumbsup:
ProStreet R/T
12-27-2005, 09:32 AM
I was wondering what SW's car would look like with black wheels, and now I know. :thumbsup:

:hail: :hail: :hail: It's going to look down right evil when you get it on the road.
clinthart
12-27-2005, 05:16 PM
Very minimalistic. I like it. Perhaps you could do something with the turn signals. The car has such nice sharp lines and angles, it always struck me that the turn signals were too square for the car. Just like the stock dash... never liked how square the dash pods were. I keep looking at the triangular shaped turn signals the BMW 325Ci uses. I am thinking of using them on QuickSilver.
Datsbad
12-27-2005, 07:48 PM
Very minimalistic. I like it. Perhaps you could do something with the turn signals. The car has such nice sharp lines and angles, it always struck me that the turn signals were too square for the car. Just like the stock dash... never liked how square the dash pods were. I keep looking at the triangular shaped turn signals the BMW 325Ci uses. I am thinking of using them on QuickSilver.


QUICKSILVER ????? Wait a minute, That was my car ! check my site for info !
clinthart
12-28-2005, 06:16 AM
QUICKSILVER ????? Wait a minute, That was my car ! check my site for info !

Nice car. Very well done. I doubt I will be able to put the same amount of money into mine as that one had.

But the color of the car isn't really silver. It is more of a pewter, or a gray-green. ;)

Nice car.
Datsbad
12-28-2005, 08:01 AM
No its , gray and silver , Still now we have 2 cars with the same name . :willy: :willy:
clinthart
12-28-2005, 09:53 AM
No its , gray and silver , Still now we have 2 cars with the same name . :willy: :willy:

Yeah... but yours is done and sold. Mine is a ways off from being done. I like the name QuickSilver. I thought for sure there would be no way I would get the URL, but no one had it. I guess I got lucky.

If you wanna send me some links to your site, I will add it to my page. I get about 1,500 visits/mo. I could probably send some traffic your way.