Anvil CF close-out panel

[XcYZ]

Installed an Anvil CF close-out panel. The fit is perfect. I should have gotten one of these a long time ago. :thumbsup:

http://lateral-g.org/temp/CF_closeout_06.jpg

[camcojb]

that looks fantastic! And I love the flat carbon fiber, looks so much purposeful and racy in flat instead of gloss. I have to ask though, when do your valve covers get sent to Autokraft for "flattening"? :D

Jody

[lil427z]

looks perty.:thumbsup:
rick k:cheers:

[melman109]

Very nice :thumbsup:

[LowchevyII]

man that does look great. Jody is right though, those valve covers need the flat treatment. Also might be time for the inner fenders :D

[BBC71Nova]

Very nice. I too love the flat carbon look.

What's with the giggle juice I see snuck in there. How's that been working out :lol:

John

[Vegas69]

Scott, car's ridiculous. That or you're one hell of a photographer. Not sure I'm feeling the flat look with the rest of the engine compartment.

[monza]

Love it :thumbsup:

[g356gear]

I am loving mine too. They fit pretty well.
http://i20.photobucket.com/albums/b245/g356gear/100_3664.jpg

[g356gear]

Installed an Anvil CF close-out panel. The fit is perfect. I should have gotten one of these a long time ago. :thumbsup:

http://lateral-g.org/temp/CF_closeout_06.jpg

What fender braces are those? I hadn't seen any that would really fit the cove in the Anvil panel but yours seem to fit well.:thumbsup:

[GregWeld]

Scott.... killer! :hail: :hail: :hail:

[BritishGreen68]

havent seen that yet thats F'ing sick sir...

[awr68]

Looks great!! :thumbsup:

[fleetus macmullitz]

Bar, you've been raised. :wow:

[tones2SS]

Looks awesome Scott!:thumbsup: That is one clean engine bay.
Oh yeah,...the rest of that car ain't bad neither!! Looks AWESOME!:cheers:

[Josh69]

What fender braces are those? I hadn't seen any that would really fit the cove in the Anvil panel but yours seem to fit well.:thumbsup:

DSE makes them, just installed a set on Monday myself! :unibrow:

[waynieZ]

I love it it looks awesome. Of corse it looked awesome before the close out too.

[rwhite692]

That looks very nice! Love the matte finish.

I wish someone would simply make things like that (and inner fenders for running a 275 tire, for that matter) out of fiberglass.

I don't need/can't justify the expense of CF.

[Rybar]

Looks killer as usual Scott. I've been thinking of that part myself, Anvil did a real nice job with it. :thumbsup:

So enough with the bling, I want to see some burnout videos :lol:

[ANVIL1]

That looks very nice! Love the matte finish.

I wish someone would simply make things like that (and inner fenders for running a 275 tire, for that matter) out of fiberglass.

I don't need/can't justify the expense of CF.

Well, you're in luck because we are going to start offering certain parts in fiberglass at an entry level price. I think we'll stock fiberglass versions of the close outs and inner fenders once we reduce our inventory of CF parts. Anything in our inventory can be special ordered in fiberglass, but we will need at least 6 weeks.

[DFRESH]

Scott---that looks amazing--really flows with your car---I'm looking forward to the time when I can do this type of refinement on mine--I love this kind of stuff. Shoot, I'd also love to swap subframes out on mine in 20 hours like you did, but let's get real. :lol:

Doug

[Matt@BOS]

Well, you're in luck because we are going to start offering certain parts in fiberglass at an entry level price. I think we'll stock fiberglass versions of the close outs and inner fenders once we reduce our inventory of CF parts. Anything in our inventory can be special ordered in fiberglass, but we will need at least 6 weeks.

Hey Matt, I think you're in luck too. I'll be calling you to help deplete your inventory of CF in the next couple of weeks. I might even have to add a close-out panel to the list, it's a nice piece.

Matt

[89 RS]

Looks awesome Scott. :thumbsup:
I wish I could find one of those that would fit my '89 RS, don't know of anybody that makes them though.

[coolwelder62]

Look's awseome Scott:thumbsup: . As does the whole car.Has it help w/ the cooling also.

[417 Motorsports]

man i love your car, i drool over it at car craft natls evey year ;)

that panels just icing on the cake :D

[XcYZ]

that looks fantastic! And I love the flat carbon fiber, looks so much purposeful and racy in flat instead of gloss. I have to ask though, when do your valve covers get sent to Autokraft for "flattening"? :D

Jody


Kurt will be spraying the valve covers with PPG Flex n Flat this winter. :thumbsup:


Thanks for kinds words, guys. I'm very happy with the fit and finish of the close-out.

http://lateral-g.org/temp/CF_closeout_02.jpg

[67rsssls]

Wow! Looks great!:thumbsup:

[NOVA]

That is one nice and clean looking engine bay, nice job :thumbsup:

[The WidowMaker]

matt, wait for it........ wanna do one for a 70 chevelle :D

[bigtyme1]

Kurt will be spraying the valve covers with PPG Flex n Flat this winter. :thumbsup:


Thanks for kinds words, guys. I'm very happy with the fit and finish of the close-out.

http://lateral-g.org/temp/CF_closeout_02.jpg

Scott, whats the part number on the upper rad hose :D

[XcYZ]

Scott, whats the part number on the upper rad hose :D

I got both hoses from NAPA, part numbers NBH8301 and NBH9038.

[PASD U]

I love how classy and understated that bay is. All about business.:thumbsup:

[ssx]

That is sweet! The need to make some for 66-67' Novas!!!

[awr68]

Scott, did you have to remove the header panel to install the close out panel?

[XcYZ]

Scott, did you have to remove the header panel to install the close out panel?

No, it it fits below it. I didn't have to really take anything apart. :thumbsup:

[awr68]

No, it it fits below it. I didn't have to really take anything apart. :thumbsup:

Good deal....nice design!! :thumbsup:

[Scorpner]

Looks great!

[yield2me]

I love the flat carbon! Nice looking engine bay! :thumbsup:

[JP customs]

Another plug for Anvil.

[rwhite692]

Well, you're in luck because we are going to start offering certain parts in fiberglass at an entry level price. I think we'll stock fiberglass versions of the close outs and inner fenders once we reduce our inventory of CF parts. Anything in our inventory can be special ordered in fiberglass, but we will need at least 6 weeks.


Matt that is good news indeed. Particularly interested in the inner fenders.

[awr68]

Matt, I would be interested in a fiberglass close out panel. :thumbsup:

[bonecrrusher]

This work with the AutoRad Radiator Core Support?