Keisler hydraulic clutch actuator

[jkcamro67]

I put one of these kits in my 67 camaro with a 502 a tko 600. The kit works but the clutch pedal feels very stiff. Anyone experience this or have an idea what the problem could be?

[KEISLERGENE]

I put one of these kits in my 67 camaro with a 502 a tko 600. The kit works but the clutch pedal feels very stiff. Anyone experience this or have an idea what the problem could be?


What hole did you put it in? Top or bottom? If you have a hard pedal it is usually a sign of pedal pushrod not going in straight.

[GregWeld]

I put in a complete kit from Keisler - 6 speed and the hydraulic clutch and it is an absolutely fabulous set up. The instructions were well written - the kit was complete to the last nut and bolt and the quality of the parts was top notch. We didn't have a single issue, so I think you may have "installation issues" with yours. Give 'em a call.

[jkcamro67]

ill look at the hole it is installed in tomorrow. got to work on te reservoir too. It is leaking slightly whre the two plastic pieces come together

[jkcamro67]

it is in the bottom hole of the two options