Gandalf
07-11-2010, 12:37 PM
Clearing out the garage.
Stock LS7 cam (Z06) - approx 4k miles on it.
$50+shipping
Pair of Flowmaster 40's - 3" offset inlet, 3" offset outlet.
$100pr+shipping
Pair of brand new, never run LS6 O2 sensors with pigtails, OEM 4-contact, square connectors. Also comes with the separate extension for one side. They were on a modified, unfired LS6 that I sold some time back but I kept the headers. The entire wiring harness was new from Speartech and have the black braided style covers. Selling because they won't work with my LS7. Not sure what all else these might fit other than LS1 & LS6.
$175+shipping
Pair of powdercoated STOCK LCA's for 1st Gen. Came out real nice. You can have the pair for less than what I have into the sandblasting and powdercoating
$75pr+shipping
Pair of Marquez RS billet taillights for 1st Gen. NOTE: THESE HAVE BEEN MODIFIED(!) Someone has trimmed down one part of the outter, viewable edge around the lense on each. I don't know why you would do that but I've seen all kinds I guess. The bottom line is, these would be great for a driver but won't be worth your time for your "good" car. I guess you could fake it and build it up with something but depends what you are into I guess. Otherwise the lenses and (remaining) polished outter look perfect. Attached a picture. You can see the outside edge of both has been shaved-down and also the top edge toward that outside edge. Again, don't ask me why - that's how they came.
$125pr+shipping
March Billet Aluminum Serpentine Pulley setup for SBC. Label on the box says "P/N 6310 - Chevy Small Block Long W/P".
They look slightly used but should polish-up real nice. There are 5pc's (you see the cap on the pulley top right of the 4 pulleys). Part# works out to 4pc kit (including the cap) so there is an extra pully in here. Assume that is P/S or A/C maybe?
$150obo+shipping
McLeod Bellhousing is sold.
Wilwood 14" Rotors are in a separate thread.
ATS Engine mounts are in a separate thread.
Thanks LG for the ad.
G.
Stock LS7 cam (Z06) - approx 4k miles on it.
$50+shipping
Pair of Flowmaster 40's - 3" offset inlet, 3" offset outlet.
$100pr+shipping
Pair of brand new, never run LS6 O2 sensors with pigtails, OEM 4-contact, square connectors. Also comes with the separate extension for one side. They were on a modified, unfired LS6 that I sold some time back but I kept the headers. The entire wiring harness was new from Speartech and have the black braided style covers. Selling because they won't work with my LS7. Not sure what all else these might fit other than LS1 & LS6.
$175+shipping
Pair of powdercoated STOCK LCA's for 1st Gen. Came out real nice. You can have the pair for less than what I have into the sandblasting and powdercoating
$75pr+shipping
Pair of Marquez RS billet taillights for 1st Gen. NOTE: THESE HAVE BEEN MODIFIED(!) Someone has trimmed down one part of the outter, viewable edge around the lense on each. I don't know why you would do that but I've seen all kinds I guess. The bottom line is, these would be great for a driver but won't be worth your time for your "good" car. I guess you could fake it and build it up with something but depends what you are into I guess. Otherwise the lenses and (remaining) polished outter look perfect. Attached a picture. You can see the outside edge of both has been shaved-down and also the top edge toward that outside edge. Again, don't ask me why - that's how they came.
$125pr+shipping
March Billet Aluminum Serpentine Pulley setup for SBC. Label on the box says "P/N 6310 - Chevy Small Block Long W/P".
They look slightly used but should polish-up real nice. There are 5pc's (you see the cap on the pulley top right of the 4 pulleys). Part# works out to 4pc kit (including the cap) so there is an extra pully in here. Assume that is P/S or A/C maybe?
$150obo+shipping
McLeod Bellhousing is sold.
Wilwood 14" Rotors are in a separate thread.
ATS Engine mounts are in a separate thread.
Thanks LG for the ad.
G.