Speed Tech's 69 99%

[Blake Foster]

This is Rogers Car and features all the Speed Tech parts. 427 big block and a700r trans.
19x9.5 with 275 and 20x12 with 345's

the wheels are new for us and we are working an a deal to be able to supply them in all sizes and finishes

[scherp69]

Sweet car!!! I remember seeing it when I picked up my subframe...looked good then but even better now. When are you going to post some pics of your nova Blake?

[kennyd]

thats typical killer customs ! nice

[DOOM]

Blake are those Rushforth's or Schott's or are you coming out with our own line?

[98ssnova]

Nice ride and I like the wheels do you know when they might be available?

[DFRESH]

Blake--the car came out awesome!! When will you be bringing it down to So Cal for a closer inspection? Will we see it at SEMA? If you need a place to keep it---i've got room---we can drive them out to SEMA---think about it!!

Doug

[Blake Foster]

Blake are those Rushforth's or Schott's or are you coming out with our own line?

we can order them in small quantites now, no they are not either. they may end up being a private label wheel we are talking to the manufacture now.

the center cap also has our logo in it just a little extra so if you have a Camaro you get the camaro logo a Chevelle or nova get there own logo.

[Blake Foster]

Blake--the car came out awesome!! When will you be bringing it down to So Cal for a closer inspection? Will we see it at SEMA? If you need a place to keep it---i've got room---we can drive them out to SEMA---think about it!!

Doug

i don't know if we will bring it to SoCal or not, we are going to bring the Nava for the Super
chevy handling challange and Good Guys Pleasenton in August.
we should hook up thursday nigth?? we will be there thursday till wednsday

[Blake Foster]

thats typical killer customs ! nice

AWWW shucks
:cheers:

[Blake Foster]

sorry the pics open up so small and not clear.

[tones2SS]

That's a nice looking car. Good job!!:thumbsup: :cheers:

[214Chevy]

Forgive me for the premature questions, as you've stated you are working on a deal with the manufacturer. But, can you tell me....are they 3-piece and what sizes and widths will they come in?

[Blake Foster]

They will be available in 2 and 3 peice and right now 18,19,20 22. i can't see us selling too many 22's
but also these ones have flat black back barrels and they look very clean that way, you cant see the inside of the rim.
they will be available in all the popular finished polished, brushed, chrome, painted, and same with the lips.

[214Chevy]

They will be available in 2 and 3 peice and right now 18,19,20 22. i can't see us selling too many 22's
but also these ones have flat black back barrels and they look very clean that way, you cant see the inside of the rim.
they will be available in all the popular finished polished, brushed, chrome, painted, and same with the lips.

LOL!! Ironically, I may be your first customer of 22's. I want a set for my 68C10. PM me with price when you get more details on them. I want 22x10 up front and 22x12 out back. You're right though, you may not be selling too many 22's for our cars, but for a truck...ooooh weeee!!!!!

[tmadden]

Is there an opportunity to see more of the car. More pics anywhere or maybe a link?

[Nutsy]

Nice looking car. I wish i had the money to get mine done! Is it going to be at any Local Shows? Langley?

[T-Type]

Nice looking car. I wish i had the money to get mine done! Is it going to be at any Local Shows? Langley?

the langley cruise in has been canceled for this year and possibly years to come as well. my understanding is someone did a burn out in the middle of a large crowd in the middle of the show somewhere last year. ruined it for everyone. it truly was one of the best in north america.

[T_Raven]

That thing is NICE!! I love the wheels.

[Blake Foster]

Is there an opportunity to see more of the car. More pics anywhere or maybe a link?

iwill post more early in the week (try to make them higher res)
there are a couple moethings to finish and get the hood on so i will wait till then

[Blake Foster]

Nice looking car. I wish i had the money to get mine done! Is it going to be at any Local Shows? Langley?

hey hows it going?
are there any local shows???? do we get a summer this year????

[ProdigyCustoms]

Very cool. Always like your styling on your cars.

[Rybar]

Looks good Blake. I've heard alot about this car :thumbsup:

[Nutsy]

hey hows it going?
are there any local shows???? do we get a summer this year????

It is going pretty good Blake. Lot of changes since i last saw you! I just read that the Langley show has been cancelled! i am seriously upset! what a joke... You going to be at good guys Puyallup then?

Trev

[ArisESQ]

damn, that thing's awesome! i like pretty much everything about it!! :thumbsup:

[Spiffav8]

AWESOME!! Nice to see Roger finally got his car done. I love it and wouldn't change one thing. Let Roger know I am looking forward to a ride in that sucker ASAP!

:captain:

[awr68]

Looks great! Can't wait to see - hear it later this month!! :thumbsup:

[phillym5]

Blake... the car is looking killer!!

[Ron Fox]

Killer car! Beautiful wheels...like to see more of the the car and wheels.

[DFRESH]

Blake, come on--give us more pictures please---perhaps the suspension? I'm ADHD over here---

Doug

[RECOVERY ROOM]

Not bad at all:thumbsup:

[ja.stoner63]

The paint looks amazing.

[Blake Foster]

still have the final polish to do this week.
heading to GG Puyallup

Here is a shot of the bottom 3" stainless all the way back.
the torque arm and subframe.

[awr68]

Money right there! Roger has to be so stoked!! :yes: :thumbsup:

[Nutsy]

Looks nice. No subframe connectors?

[Blake Foster]

no didn't bother, Pauls didn't have them this is only a street car so no real need for them
Roger had it out in the parking lot last night doing long burn outs, the think looks amazing.

[tones2SS]

VERY NICE!!:thumbsup:

[youthpastor]

still have the final polish to do this week.
heading to GG Puyallup

Here is a shot of the bottom 3" stainless all the way back.
the torque arm and subframe.

OHH MAN!! - I can't wait to get to this stage- those tail pipes fit awesome- man I love this rear suspension kit!

[youthpastor]

Looks nice. No subframe connectors?

the Arm mounted to the front sub ties every thing together- If you want you can do connectors with this kit- I used this set up with DSE connectors- only slight modificaions - works great together

[DFRESH]

still have the final polish to do this week.
heading to GG Puyallup

Here is a shot of the bottom 3" stainless all the way back.
the torque arm and subframe.

Dude, that is pure car porn for sure---great shot.

Doug

[Blake Foster]

Place your orders now !! :lol: :lol: :lol:

[Blake Foster]

well the car is done!
it's photo shoot day here today.
i think Rogers Excited.
i will post some shots tomorrow after the shoot

[EBMC]

Turned out great!

[Chicken Louie]

Just got back from a trip to Vancouver and had a chance to drop in at Speed Tech and checked out RedZed in person! WOW!!!!:hail:

The stance and the wheels are bang on and the colour is amazing, Roger took me for a spin and it is very impressive, the car is tight and brakes well, and comes in and out corners holding a line and we weren't out for a Sunday drive. We were moving pretty good :unibrow: . The torque arm provides great ride quality and I am very happy that I have selected the track time package for my car.

Thanks for an awesome experience.

[Blake Foster]

here are a couple more of it finished

[Rybar]

Looks badass Blake. :thumbsup:

[tones2SS]

Looks badass Blake. :thumbsup:

You took the words right out of my mouth Ryan!
That car does look bad ass indeed!:thumbsup:

[awr68]

Very nicely done! Is that one of the early '69's that came with the '68 rear spoiler?

Bad Ass Brother! Can't wait to see it next week!! :woot: :thumbsup: :hail:

You should send Pete one of those license plates for the 'finished' pics of Karma! :yes:

[DFRESH]

Blake---that is pure art man---love the single stripe and the wheel combo---is that ride height or photo ride height? How big is the tire up front? Where did the side view mirrors come from---and lastly--will it be at SEMA?

Doug

[Blake Foster]

so many questions!!
that is ride height Roger has been driving it non stop for 5 days now.
front tires are a 275 30 19
side mirrors are Iroc Camaro
it may be a plesanton in a month

[dsster]

For reals? you guys are gona be at goodguys pleasanton at northern cali?

[DFRESH]

so many questions!!
that is ride height Roger has been driving it non stop for 5 days now.
front tires are a 275 30 19
side mirrors are Iroc Camaro
it may be a plesanton in a month

Blake--if you guys are coming, make sure to give some notice---I'll make the trip if you guys are coming down--would really like to see the car in person.

Doug

[ArisESQ]

this car honestly makes me excited to get back to work on mine... really really great job.

[redzed]

Hey Guys. Thanks for the comments. In case you were wondering what the car looked like back in 1986, when I was in grade 11, 1 year after I bought it, here you go. Yes that was me behind that playboy air freshener :yes:
The ride height in the photo's is my driving ride height. We had 3 of us in the car with some pretty hard cornering and launches and over speed bumps with no rubbing or dinging of the exhaust. Overall, I am very happy with the results and just want to get out and drive! :D

[Rybar]

Nice car Roger. I remember your car in its previous build. Did you guys have to do any more work than a standard mini-tub to fit the 20x12s?

I'm good friends with Sandro. He has told me alot about your car. :thumbsup:

[nvr2fst]

Bad A#! car Rodger.
Are we to consider this an official Speed Tech test car :unibrow:

[youthpastor]

Hey Guys. Thanks for the comments. In case you were wondering what the car looked like back in 1986, when I was in grade 11, 1 year after I bought it, here you go. Yes that was me behind that playboy air freshener :yes:
The ride height in the photo's is my driving ride height. We had 3 of us in the car with some pretty hard cornering and launches and over speed bumps with no rubbing or dinging of the exhaust. Overall, I am very happy with the results and just want to get out and drive! :D

Is that a mullet I see you rockin':unibrow:

[Nutsy]

Nice car Roger. I remember your car in its previous build. Did you guys have to do any more work than a standard mini-tub to fit the 20x12s?

I'm good friends with Sandro. He has told me alot about your car. :thumbsup:

I saw your car Ryan parked on Hastings on Saturday. It looks awesome! I would love to come check it out in person.

I was going to stop to say hi, but i needed to get home. I was in my Chevy II which i just pulled out of storage that day.

Trev

[DFRESH]

Hey Guys. Thanks for the comments. In case you were wondering what the car looked like back in 1986, when I was in grade 11, 1 year after I bought it, here you go. Yes that was me behind that playboy air freshener :yes:
The ride height in the photo's is my driving ride height. We had 3 of us in the car with some pretty hard cornering and launches and over speed bumps with no rubbing or dinging of the exhaust. Overall, I am very happy with the results and just want to get out and drive! :D

Dude, why didn't you keep those mirrors on it---:lol:

My car is still lower than yours--even if your's does look better--:rofl:

Nice to see you posting on here--maybe you could do more than one post a year from now on.

Looking forward to seeing the car bro---looks just amazing from those pics. Congrats.

Doug

[Blake Foster]

Dude, why didn't you keep those mirrors on it---:lol:

My car is still lower than yours--even if your's does look better--:rofl:

Nice to see you posting on here--maybe you could do more than one post a year from now on.

Looking forward to seeing the car bro---looks just amazing from those pics. Congrats.

Doug

i am breaking Roger in slowly to the forum thing, usually he is too busy talking someones ear off to get on here and post.

[Blake Foster]

Bad A#! car Rodger.
Are we to consider this an official Speed Tech test car :unibrow:

yea that would be the official " i gota blown big block what do you have" test car!!!
but hey i guess 600 hp is 600 hp don't matter how you measure it, unless it is the length of the rubber on the road

[coolwelder62]

Awesome car!!!That's a great shade of red.:thumbsup:

[redzed]

Nice car Roger. I remember your car in its previous build. Did you guys have to do any more work than a standard mini-tub to fit the 20x12s?

I'm good friends with Sandro. He has told me alot about your car. :thumbsup:

Thanks man. I've heard alot about yours. Just the min-tubs and the perfect offset.
If Sandro ever gets his finished:rolleyes: (I know he is going to be reading this) we will all have to hook up and make some noise :unibrow:

[redzed]

Bad A#! car Rodger.
Are we to consider this an official Speed Tech test car :unibrow:

Oh I will be testing her allright :D That's what these cars are all about!

[redzed]

Is that a mullet I see you rockin':unibrow:

Mullet city buddy, mullet city! Remember, it was in back then....I think :unibrow:

[redzed]

Dude, why didn't you keep those mirrors on it---:lol:

My car is still lower than yours--even if your's does look better--:rofl:

Nice to see you posting on here--maybe you could do more than one post a year from now on.

Looking forward to seeing the car bro---looks just amazing from those pics. Congrats.

Doug

Come on, those mirrors were cool :(
Your car is lower than mine. You are officially crazier than me :yes:
2-3-4......
Thanks man!

[Rybar]

Thanks man. I've heard alot about yours. Just the min-tubs and the perfect offset.
If Sandro ever gets his finished:rolleyes: (I know he is going to be reading this) we will all have to hook up and make some noise :unibrow:

LOL perfect offset is right. Hey you guys need to finish his subframe first. :P He keeps asking me about a Speedtech TQ-arm kit for his second gen. I keep telling him to do it. I did consider it for my car. :cheers:

[cdushane]

Car looks bad a$$! :thumbsup:

[Payton King]

It turned out very nice.

I think the 3rd gen mirrors are the best I have seen on a 69. How much work to get them on...modify the base?

[redzed]

LOL perfect offset is right. Hey you guys need to finish his subframe first. :P He keeps asking me about a Speedtech TQ-arm kit for his second gen. I keep telling him to do it. I did consider it for my car. :cheers:

Who us? :_paranoid Ya I Know. He will have the first second gen Chicane kit out there. It takes time to do it right. The torque arm will be following shortly after. His build should be pretty sick when its done.

[redzed]

It turned out very nice.

I think the 3rd gen mirrors are the best I have seen on a 69. How much work to get them on...modify the base?

We actually left the base a lone and added a contoured base to it. I'm really happy with them as not only do they look good, but you can actually see through them :thumbsup:

[redzed]

Here's a great shot that also shows the ground clearance at ride height with the full 3" exhaust.

[DFRESH]

Can't stop looking at the pics---it is such a great car---any pics of the interior you can share? Motor? A profile shot of you? :lol:

Doug

[redzed]

Can't stop looking at the pics---it is such a great car---any pics of the interior you can share? Motor? A profile shot of you? :lol:

Doug

Here is a few more Doug. None of me though, I may be wanted somewhere :_paranoid

[tones2SS]

I've already said it, but I'll say it again. Very, very nice looking car.:yes: :thumbsup:

[DFRESH]

Thanks a bunch for sharing those!! You must be stoked man---I mean not everyone has a car like this one---it's amazing. Would love to take a ride/drive in it that last weekend of August when it comes out the GG show at Pleasanton. Since you guys are planning on attending, I'm going to make arrangements to drive up for it.

Doug

[Swain]

Badd Ass car ..

[67greengt]

Looks great Roger! Congrats:thumbsup:

[tmadden]

I sure could use a couple of those shots for screen savers

[dodge]

Well done guys.Looks awesome:thumbsup:

[redzed]

So I have probably put on 300 miles since completion so far and decided to check everything underneath as I noticed an oil leak. It so happens that my "little oil leak" was actually a crack in the metal in the middle of my oil pan!?! :rolleyes: Its right around the area that the gussets are welded on the inside of the pan and slowly but surely, it started leaking and covered the underside of the car :willy:
We have a saying at the shop when we run into stuff like this: I LOVE CARS, I LOVE CARS, I LOVE CARS.......

[Rybar]

:lol: Isn't it fun shaking down a new build. I'm still chasing constant little gremlins myself. :_paranoid

[redzed]

:lol: Isn't it fun shaking down a new build. I'm still chasing constant little gremlins myself. :_paranoid

Ya, way too much fun!:( Just trying to get her ready for Goodguys Puyallup. Should be a good time.

[redzed]

Just some feed back on using the Baer brakes for those of you looking to run a manual set up. Amazing! :bow: I used the 14" pro plus, 6 piston front and rear will a 1" Wilwood master and a propotioning vavle hidden under the drivers door. No power booster and they stop amazingly well. Great pedal feel.

[Cris@JCG]

Rodger- I just saw the build on the Speed tech site.. Absolutely luv it! You guys did a damm good on this one :thumbsup:

So, when are you bringing it to SoCa?? Can I drive it!! Paul let me drive his 69 :D

[redzed]

Rodger- I just saw the build on the Speed tech site.. Absolutely luv it! You guys did a damm good on this one :thumbsup:

So, when are you bringing it to SoCa?? Can I drive it!! Paul let me drive his 69 :D

Thanks Cris! She may be heading down that way in August and you are very welcome to drive her. I would be quirious to get your feedback after driving Pauls. :yes:

[nvr2fst]

Rodger just looked through you photos on your web page. Again beautiful ride.
Stance is dead on. Hows your height compared to Dougs, if Im not mistaken he's running your subframe. Seen it, driven in it and I cant believe how low he sits. Id like to see the the two of these rides next to each other.

[awr68]

Roger, what day are you getting to Puyallup? Can't wait to see it! Did Blake decide if he is coming down? Who all is coming down this year?

[redzed]

Roger, what day are you getting to Puyallup? Can't wait to see it! Did Blake decide if he is coming down? Who all is coming down this year?

It looks like I'll be heading down Thursday night Anthony. Blake will be thrashing on the Nova so he will not be able to make it. Anita may also be heading down. Ill know more tomorrow.

[Cris@JCG]

I can't wait to see it in person! & get behind the wheel :D

Thanks Cris! She may be heading down that way in August and you are very welcome to drive her. I would be quirious to get your feedback after driving Pauls. :yes:

[Vegas69]

She's a beat Roger. You guys always make the best of what you have. Bummer on the oil leak. I'd just run down to autozone and get some JB Weld. :rofl:

[redzed]

She's a beat Roger. You guys always make the best of what you have. Bummer on the oil leak. I'd just run down to autozone and get some JB Weld. :rofl:

I was thinking my hubba bubba would work :unibrow:

[DFRESH]

I was thinking my hubba bubba would work :unibrow:

Just make sure it's Cherry or Strawberry flavor---any of the other choices could detract from the car.

Blake can't spare a weekend? Geeezzzz. It's like he's vested in the company or something---

Doug

[redzed]

Just make sure it's Cherry or Strawberry flavor---any of the other choices could detract from the car.

Blake can't spare a weekend? Geeezzzz. It's like he's vested in the company or something---

Doug

Ya, no kidding. :_paranoid We are starting to make plans for Pleasanton Doug. Hope to see you there. Can't wait to see your ride. :yes:

[awr68]

It looks like I'll be heading down Thursday night Anthony. Blake will be thrashing on the Nova so he will not be able to make it. Anita may also be heading down. Ill know more tomorrow.

Yeah, Blake had told me he most likely wasn't going to make it...too bad! You need to bring the girls though! :cheers:

[fleetus macmullitz]

Well, your version of Canadian mind control is working. Ya got people all worked up about this car. :unibrow:

Need some bigger pics though. :thumbsup:

[Steve1968LS2]

Just some feed back on using the Baer brakes for those of you looking to run a manual set up. Amazing! :bow: I used the 14" pro plus, 6 piston front and rear will a 1" Wilwood master and a propotioning vavle hidden under the drivers door. No power booster and they stop amazingly well. Great pedal feel.

That's exactly what I run.. 6P calipers and the Wilwood 1" master.. great setup.

[Steve1968LS2]

Make sure you let me know when it's done.. we could use more red '69s in the magazine ;)

Seriously though.. killer ride (no pun intended)

[prostreet69cama]

Nice car. What size guages did you put in the guage cluster?

[redzed]

Make sure you let me know when it's done.. we could use more red '69s in the magazine ;)

Seriously though.. killer ride (no pun intended)

Thanks Steve. Chris Shelton was just up here taking his 2000 pics for Super Chevy. I think they had the same idea.....another red '69 Camaro :willy: .

The way I always say it, build the car for you, not to please the crowds.

Seriously though, that brake combo does kick butt! :thumbsup:

[redzed]

Nice car. What size guages did you put in the guage cluster?

Speedo and Tach 3 3/8". Fuel 2 1/16". You need to "modify" the back of the stock dash to make it fit right but I think they give it an updated stock look.

[redzed]

Well, your version of Canadian mind control is working. Ya got people all worked up about this car. :unibrow:

Need some bigger pics though. :thumbsup:

It's all about mind control :unibrow:
Once I figure out how to upload larger pics on here, I will. Our site has some bigger pics though.

[redzed]

Ok, so I couldn't deal with how the stock spoiler looked on RedZed so....here we go again :rolleyes: . One night after work, Gary and I decided to make a new custom rear spoiler. So out cam the tinfoil :_paranoid and away we went.
http://i1187.photobucket.com/albums/z394/Red-Zed/PittMeadows-20110322-00066.jpg
Add a little foam...
http://i1187.photobucket.com/albums/z394/Red-Zed/PittMeadows-20110322-00065.jpg
and start carving...
http://i1187.photobucket.com/albums/z394/Red-Zed/IMG-20110322-00068.jpg
and shaping....
http://i1187.photobucket.com/albums/z394/Red-Zed/IMG-20110322-00072.jpg
and sanding....
http://i1187.photobucket.com/albums/z394/Red-Zed/IMG-20110322-00073.jpg
starting to shape up :D
http://i1187.photobucket.com/albums/z394/Red-Zed/IMG-20110322-00081.jpg
more coats of fiberglass...
http://i1187.photobucket.com/albums/z394/Red-Zed/IMG-20110322-00085.jpg
Ready for fill and paint.....
http://i1187.photobucket.com/albums/z394/Red-Zed/IMG-20110404-00088.jpg

[MaxHarvard]

Roger, what kind of foam is that and where did you get it?

I've been trying to find that stuff for forever!

[redzed]

Finished look...
http://i1187.photobucket.com/albums/z394/Red-Zed/DSCN0065.jpg
http://i1187.photobucket.com/albums/z394/Red-Zed/DSCN0072.jpg
http://i1187.photobucket.com/albums/z394/Red-Zed/DSCN0066.jpg
http://i1187.photobucket.com/albums/z394/Red-Zed/DSCN0067.jpg

[scherp69]

That looks awesome Roger. Good job :thumbsup:

[redzed]

Roger, what kind of foam is that and where did you get it?

I've been trying to find that stuff for forever!

Just a high density urethane carving foam is what I've been told. We get it from a local foam shop.

[redzed]

That looks awesome Roger. Good job :thumbsup:

Thanks Mike.

[redzed]

Here is a few pics at the Puyallup Goodguys Show. RedZed won the Builders Choice Award :D . It was a good show for us overall and good to see a few of you guys stopping by the booth :thumbsup:
http://i1187.photobucket.com/albums/z394/Red-Zed/DSCN0071.jpg
http://i1187.photobucket.com/albums/z394/Red-Zed/DSCN0072.jpg
http://i1187.photobucket.com/albums/z394/Red-Zed/DSCN0069.jpg
http://i1187.photobucket.com/albums/z394/Red-Zed/DSCN0082.jpg
Hard to believe that I drove the car from Vancouver on Thursday 4 1/2 hours to get there. And through the rain to boot :( but all in all, it drove great!

[Rybar]

Spoiler looks good Roger, congrats on the award.

[redzed]

Spoiler looks good Roger, congrats on the award.
Thanks Rybar. We are headed to the Spokane Super Chevy Show this weekend and RedZed will hit its first autocross :yes:

[MaxHarvard]

Congrats on the win! Gotta feel good :)

[Ralphlovs72chev]

Im officialy coping your car. Your going to have to put some copy rights on it.JK but wow looks amazing in the pictures i can only imagine what she must look like in person. Dig everything about it. Love the wheels. Congrats on the award!

[redzed]

Congrats on the win! Gotta feel good :)

It does feel good. Thank you.

[redzed]

Im officialy coping your car. Your going to have to put some copy rights on it.JK but wow looks amazing in the pictures i can only imagine what she must look like in person. Dig everything about it. Love the wheels. Congrats on the award!

No problem Ralph. :yes: Thanks.

[Ron in SoCal]

Nice spolier upgrade Roger. I think you should use it as a plug and kick out a few! :yes:

[redzed]

Nice spolier upgrade Roger. I think you should use it as a plug and kick out a few! :yes:

Ya I thought about it but, were not in the body panel biz. Besides, its trademarked......not :_paranoid

[DOOM]

Roger the spoiler looks great !!

[tones2SS]

Spoiler looks great. That is really a slick looking car. The paint, wheels and stance really set it off.
Congrats on the award.:cheers:

[56pickup]

congrats on the award! Car came out awesome!

[awr68]

Congrats on the award! Spoiler looks great! It was nice to see you guys again!

[DriverzInc]

Congrats Roger! Spoiler looks bitchin! Have fun and good luck to you at Super Chevy!

[redzed]

Congrats Roger! Spoiler looks bitchin! Have fun and good luck to you at Super Chevy!

Thanks everyone. Yes, looking forward to having my car on the track and getting some go-pro video. Will try not to beat it up too badly :willy:

[rwhite692]

Love what you did with the spoiler. I have many fond (and not so fond) memories of slinging glass and resin in my boatyard days back in the 80s...maybe it's time to revisit those skills again!

[Chicken Louie]

Roger,
Fear no cone!! Great work on the spoiler. It is a cool addition to car. Don't forget to take your stop watch to Super Chevy. I can't wait to hear the results. It will be nice to see a Speedtech throwdown between RedZed and Blake's Nova :thumbsup: Congrats on the awards and good luck on the weekend.

[waynieZ]

I love the rear spoiler. :thumbsup:

[GregWeld]

Rodger --- I'm not sure what happened -- but I haven't seen the Camaro since I took it out of the trailer. One minute it was here - next minute it was gone.

Oh - Sorry you can't come inside "the shed" tomorrow... yeah --- there's a toxic spill in there or something...

Think about all the gas you'll save not having to haul it over to Spokane... that trailer is going to pull really well without that weight in there.

I do have some paperwork for you to sign before you head out... it's nothing.. just a "release" you don't need to really read it or anything. It's just a "formality". It's just like a er uh -- a um -- a drinking release.. Yeah that's it... it's just so I can offer you a beer while you're here. I know you'll be in a big hurry so just sign - gulp the beer (keystone light) and you guys better get going you've go a long drive. I'll let you know if they find the Camaro.. but I'm sure they won't. You know the cops don't care much for "property crimes" -- and the car being from a "foreign country" and all.

[redzed]

Rodger --- I'm not sure what happened -- but I haven't seen the Camaro since I took it out of the trailer. One minute it was here - next minute it was gone.

Oh - Sorry you can't come inside "the shed" tomorrow... yeah --- there's a toxic spill in there or something...

Think about all the gas you'll save not having to haul it over to Spokane... that trailer is going to pull really well without that weight in there.

I do have some paperwork for you to sign before you head out... it's nothing.. just a "release" you don't need to really read it or anything. It's just a "formality". It's just like a er uh -- a um -- a drinking release.. Yeah that's it... it's just so I can offer you a beer while you're here. I know you'll be in a big hurry so just sign - gulp the beer (keystone light) and you guys better get going you've go a long drive. I'll let you know if they find the Camaro.. but I'm sure they won't. You know the cops don't care much for "property crimes" -- and the car being from a "foreign country" and all.

:faint: :faint: :faint: I'm sure someone just used it for a short drive to the local corner store and will be bringing it right back. :rolleyes: Maybe they will even fill it up before they bring it back form there joy ride ....I mean from the corner store....and put the pieces back together.....I mean polish it. I'm sure I will see it back never.....I mean soon. :willy:
As for that light beer.....there had better be a lot of HARD LIQUOR!!! And I mean A LOT!!! :D :D :D Us foreigners sure like our hard liquor :lol:
Thanks again Greg! :cheers:

[sidewayz71]

Final results from Spokane? Go Pro footage?
I talked with you a little on Saturday at the event, thanks for the hospitality. The Camaro is even more amazing in person.:thumbsup: I hope you guys can keep eastern Washington on your schedule.

[redzed]

Final results from Spokane? Go Pro footage?
I talked with you a little on Saturday at the event, thanks for the hospitality. The Camaro is even more amazing in person.:thumbsup: I hope you guys can keep eastern Washington on your schedule.

Thanks Sidewayz71. Here is a shot and some video. When we ran RedZed on the first day, we were pleasantly surprised. We ran a 22.9 sec compared to ResurreXion at a 22.6. Very happy with those results! :thumbsup: We only ran one batch of 4 runs on the first day. On the second day I had a battery issue during one of the laps that shut me down. :(

Here is a pic:
http://i1187.photobucket.com/albums/z394/Red-Zed/DSCN0102cropped.jpg
and some video:
http://youtu.be/aLBPOz-oJW8
and more video(sorry not great quality):
http://youtu.be/rrX_T4tZT2M

[sidewayz71]

I missed RedZed but I got this vid from the cheap seats!:lol: I love the go pro video.

http://s693.photobucket.com/albums/vv294/sidewayz71/Super%20Chevy%20Sunday/?action=view&current=DSCN0667.mp4

[Rybar]

Thought I would post some pics of Rogers badass Camaro that came out to our cruise. This thing is sick.

http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0128.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0140.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0131.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0132.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0147.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0150.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0154.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0155.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0156.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/614600_486492598046278_347469269_o.jpg

[Ralphlovs72chev]

Just beautiful!! :thumbsup:

[tones2SS]

Man, that car looks great!

[fleetus macmullitz]

Attention grabbing for sure. :cool:

Any vids of it out there so we can hear this thing run?

[WicKeD_SS]

:hail: :hail: :hail:

[waynieZ]

very Nice.

[RECOVERY ROOM]

Good lookin car Blake

[89 RS]

Awesome Camaro. :thumbsup:

[214Chevy]

SICK!!!!:wow: :wow:

[redzed]

Thought I would post some pics of Rogers badass Camaro that came out to our cruise. This thing is sick.

http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0128.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0140.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0131.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0132.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0147.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0150.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0154.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0155.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/DSC_0156.jpg
http://i34.photobucket.com/albums/d125/Rybar/Mission%20cruise%20Aug%2017%202012/614600_486492598046278_347469269_o.jpg

Thanks Ryan! The cruise was a great time and there were some cool cars that showed up!:thumbsup:

[tmadden]

Is the front bumper Marquez?

[redzed]

Is the front bumper Marquez?

It is a custom fiberglass bumper we picked up from a local company and added metal reinforcement. As long as I never need to use it :_paranoid I should be ok :D