fletcherscustoms
12-13-2005, 01:28 PM
2005 GMC Sierra 1500 Crew Cab, 2 wheel Drive
4915 Miles
$32,000 firm
Custom one of a kind daily driven show truck! Absolutly stunning and perfect in every way. Truck is driven daily by me and was built to a shop/show truck and my daily driver. It was brought into my www.fletcherscustoms.com with 813 miles on the odometer and completly taken apart to install the one of a kind air ride system. We used all the best parts available and all the quality folks are used to getting from my shop. Truck drives and rides like a dream. And now you can set it low at the grocery store or your local car show. This truck is a head turner and has one a few local shows this winter since it was completed. Truck is daily driven and ws just finished about 3 months ago. Don't haev any fear about driving this thing anywhere, all high quality parts were used, and extreme attention to detail on every aspect.
Here are the truck specs:
Exterior:
-Pristine Condition, no scratches or dings
-Crew Cab
-Silver Birch Paint
-Cadillac Escalade handles on all doors
-Smoothed and painted Tailgate handle
-Sir micheals Weld in rollpan
-Tailgate smoothed and painted
-Billet Antenae
-Custom Bed!! Bed floor was raised 8" to cover the frame notch for the suspension. The entire new inside bed was built with 3/16" material then custom color matched bed liner was applied to make this truck very very custom and still retain the usability of the bed. This truck has been used many times to haul tools, metal, rearend, and many other items and held up great. Remember this truck was built to be a daily driven show truck and used as shop truck also!
Interior:
-Perfect condition, non smoker
-Charcoal Grey
-Factory 40/20/40 bench up front, with rear bench seat
-Full carpet
-Custom Autometer guage panel for Air guages
-Rubber floormats
Stereo:
-Over $5000 invested
-Pioneer AVIC-N2, in dash 7.5 screen, motorized flip out, DVD player, Navigation, Ipod hookup, and more
-Pionner AVR-W6100, 6.5" overhead monitor
-MB Quart 5 1/4" Reference series components in front doors
-Crossfire 5 1/4" 3 Way speakers in rear doors
-(2) JL Audio 10" W1 Subs in custom carpeted enclosure behind rear seat
-Rockford Fosgate T3000.2 on the subs
-Crossfire 280x2 on the highs
Engine:
-GMC 5.3
-K&N filtercharger kit
-Flowmaster Exhaust
Wheels:
-Custom made
-4000 miles on them
-22" x 8.5" Intro Moreno 6 with 6.5" backspacing
-Pirelli Scorpion 265/35/22
-Wheels are Clearcoated, never worry about polishign again, just wipe them off and they shine like glass
Suspension:
-Full Air Ride Suspension built by shop, www.fletcherscustoms.com, all the best of the best used on this truck
Front:
-AirRide Technologies Strong Arms, upper and lower tubular control arms
-Slam Specialites RS-72 bags
-Custom 5" Cups
Rear:
-Custom built Parralel 4-link, 1.5" DOM bars with Urethane bushings
-Laser Cut brackets
-Custom made Canti lever bars behind axle, 2x2 1/4" tube
-Custom Chrome Watts link with custom bars
-Over 14 inches of lift
-8" custom notch, 2"x4" , 1/4" tube
-Slam Specilaties RS-72 Bags
Air Control and Supply:
-(4) GC 250 1/2" Valves for fill
-(4) GC 250 3/8" valves for dumps
-7 Switch mini switch box
-1/2 Parker DOT airline
-1/2" Parker hanefin fittings, best on the market
-(3) 5 gallon tanks, custom mounted under bed
-Airlift Engine Driven compressor
-(2) Dual Needle Air guages
here are some pics I have a ton more if needed
http://i4.ebayimg.com/02/i/05/b8/1b/14_12.JPG
http://i7.ebayimg.com/01/i/05/b8/35/a8_12.JPG
http://i18.ebayimg.com/04/i/05/9a/2a/d0_12.JPG
http://i17.ebayimg.com/02/i/05/b8/0e/94_12.JPG
4915 Miles
$32,000 firm
Custom one of a kind daily driven show truck! Absolutly stunning and perfect in every way. Truck is driven daily by me and was built to a shop/show truck and my daily driver. It was brought into my www.fletcherscustoms.com with 813 miles on the odometer and completly taken apart to install the one of a kind air ride system. We used all the best parts available and all the quality folks are used to getting from my shop. Truck drives and rides like a dream. And now you can set it low at the grocery store or your local car show. This truck is a head turner and has one a few local shows this winter since it was completed. Truck is daily driven and ws just finished about 3 months ago. Don't haev any fear about driving this thing anywhere, all high quality parts were used, and extreme attention to detail on every aspect.
Here are the truck specs:
Exterior:
-Pristine Condition, no scratches or dings
-Crew Cab
-Silver Birch Paint
-Cadillac Escalade handles on all doors
-Smoothed and painted Tailgate handle
-Sir micheals Weld in rollpan
-Tailgate smoothed and painted
-Billet Antenae
-Custom Bed!! Bed floor was raised 8" to cover the frame notch for the suspension. The entire new inside bed was built with 3/16" material then custom color matched bed liner was applied to make this truck very very custom and still retain the usability of the bed. This truck has been used many times to haul tools, metal, rearend, and many other items and held up great. Remember this truck was built to be a daily driven show truck and used as shop truck also!
Interior:
-Perfect condition, non smoker
-Charcoal Grey
-Factory 40/20/40 bench up front, with rear bench seat
-Full carpet
-Custom Autometer guage panel for Air guages
-Rubber floormats
Stereo:
-Over $5000 invested
-Pioneer AVIC-N2, in dash 7.5 screen, motorized flip out, DVD player, Navigation, Ipod hookup, and more
-Pionner AVR-W6100, 6.5" overhead monitor
-MB Quart 5 1/4" Reference series components in front doors
-Crossfire 5 1/4" 3 Way speakers in rear doors
-(2) JL Audio 10" W1 Subs in custom carpeted enclosure behind rear seat
-Rockford Fosgate T3000.2 on the subs
-Crossfire 280x2 on the highs
Engine:
-GMC 5.3
-K&N filtercharger kit
-Flowmaster Exhaust
Wheels:
-Custom made
-4000 miles on them
-22" x 8.5" Intro Moreno 6 with 6.5" backspacing
-Pirelli Scorpion 265/35/22
-Wheels are Clearcoated, never worry about polishign again, just wipe them off and they shine like glass
Suspension:
-Full Air Ride Suspension built by shop, www.fletcherscustoms.com, all the best of the best used on this truck
Front:
-AirRide Technologies Strong Arms, upper and lower tubular control arms
-Slam Specialites RS-72 bags
-Custom 5" Cups
Rear:
-Custom built Parralel 4-link, 1.5" DOM bars with Urethane bushings
-Laser Cut brackets
-Custom made Canti lever bars behind axle, 2x2 1/4" tube
-Custom Chrome Watts link with custom bars
-Over 14 inches of lift
-8" custom notch, 2"x4" , 1/4" tube
-Slam Specilaties RS-72 Bags
Air Control and Supply:
-(4) GC 250 1/2" Valves for fill
-(4) GC 250 3/8" valves for dumps
-7 Switch mini switch box
-1/2 Parker DOT airline
-1/2" Parker hanefin fittings, best on the market
-(3) 5 gallon tanks, custom mounted under bed
-Airlift Engine Driven compressor
-(2) Dual Needle Air guages
here are some pics I have a ton more if needed
http://i4.ebayimg.com/02/i/05/b8/1b/14_12.JPG
http://i7.ebayimg.com/01/i/05/b8/35/a8_12.JPG
http://i18.ebayimg.com/04/i/05/9a/2a/d0_12.JPG
http://i17.ebayimg.com/02/i/05/b8/0e/94_12.JPG