Davezz28
06-07-2010, 07:07 PM
Hello all
I have decided to change direction in my build and am selling a lot of the SBC engine parts that I have aquired.
Please email me with questions at [email protected] ...I always forget to check my PMs. I can get back to a lot quicker if you email me.
Please include SBC Parts in the subject line so I dont deleate it thinking it is junk email
I am located in the Fresno/Clovis area if you want to check something out or pick it up.
Callies Stealth 4340 Crank 3.75 stroke 350 mains NEW $800
Airflow Research 210 heads bare as cast w/76cc CNC chambers NEW $650
Manley Race Flo Valves 2.08/1.60 +.100 NIB $150
Isky Tool Room Springs 9925 (Used Dyno Time) $75
Manley Titanium Ret. (23670) W/super 7 keepers (used) $50
Isky Red-Zone Roller lifters 272-RH NIB $500
Lunati Solid Roller Cam Custom grind NIB
Int:286/244/.555 Exh:289/254/.564 112LS $200
Crane Shaft Rockers 11809-1 1.6/1.55 (used) $450
Manley Pro I beam rods 6.000/2.100 (used) $300
Moroso Road Race oil pan 21900 NIB
Includes STD Vol PU 24170 & HV PU 24350 $225
Brodix Intake HV1016 dual plane (Like New) $150
Manley 3 Piece timing chain cover NEW $150
Fluidampr 7.25” External Balance NIB (was on crank never started) SOLD
McLeod Street Twin B&B/L Alum 153 flywheel 1 1/8X26
(Clutch was used, but very little) $550
Edelbrock Alum Water pump (8811) NIB SOLD
Hedman Headers 65003 1 ¾ Primaries (1st gen Camaro) NIB $100
MSD Digital 6 plus (6520) NIB $200
Block Fresh 4.060 Bore 4 bolt splayed caps ARP Main Stud/Bolts $400
Thanks for looking.
David
I have decided to change direction in my build and am selling a lot of the SBC engine parts that I have aquired.
Please email me with questions at [email protected] ...I always forget to check my PMs. I can get back to a lot quicker if you email me.
Please include SBC Parts in the subject line so I dont deleate it thinking it is junk email
I am located in the Fresno/Clovis area if you want to check something out or pick it up.
Callies Stealth 4340 Crank 3.75 stroke 350 mains NEW $800
Airflow Research 210 heads bare as cast w/76cc CNC chambers NEW $650
Manley Race Flo Valves 2.08/1.60 +.100 NIB $150
Isky Tool Room Springs 9925 (Used Dyno Time) $75
Manley Titanium Ret. (23670) W/super 7 keepers (used) $50
Isky Red-Zone Roller lifters 272-RH NIB $500
Lunati Solid Roller Cam Custom grind NIB
Int:286/244/.555 Exh:289/254/.564 112LS $200
Crane Shaft Rockers 11809-1 1.6/1.55 (used) $450
Manley Pro I beam rods 6.000/2.100 (used) $300
Moroso Road Race oil pan 21900 NIB
Includes STD Vol PU 24170 & HV PU 24350 $225
Brodix Intake HV1016 dual plane (Like New) $150
Manley 3 Piece timing chain cover NEW $150
Fluidampr 7.25” External Balance NIB (was on crank never started) SOLD
McLeod Street Twin B&B/L Alum 153 flywheel 1 1/8X26
(Clutch was used, but very little) $550
Edelbrock Alum Water pump (8811) NIB SOLD
Hedman Headers 65003 1 ¾ Primaries (1st gen Camaro) NIB $100
MSD Digital 6 plus (6520) NIB $200
Block Fresh 4.060 Bore 4 bolt splayed caps ARP Main Stud/Bolts $400
Thanks for looking.
David