what size wheel for 69 camaro DSE min tubbed

[frankv11]

I just finished installing dse's on my 69 camro would liketo know what offset people are using with this set up. im thinking of going with 20" the widest I could go and is the 335 tire the standar for this set upor can I go wider. I would like to get info prior to installing quadra link onto the the car. car is sitting out side and dont want my new stuff expose to elements.

[BBC69Camaro]

I'd probably do some measurements and see how centered your rear sub-frame and axle to your body are. On my car they were about 1/8" offset to the driver's side. From my understanding this is not uncommon and can affect the wheel sizes and offsets.

I got around my offset by rolling the rear fender lips especially on the driver's side.

I used a 17x12 with 8.25 BS on a 335/35/17 Michelin PS/2 Tire. But I didn't narrow my rear end at all kept it the standard width for a 69 Camaro (didn't want the deep dish went for more of a sleeper look )

http://i328.photobucket.com/albums/l346/Marroweter/Engine/Engine%20Install/EngineInstall056.jpg


Hope this helps

[frankv11]

thanks for the help. ill look into measuring tofind center. I just want to get a general idea. thanks god pointer

[Vegas69]

You can adjust for 1/8" with you panhard bar. Nail the backspacing with the rear end centered to the body.

[frankv11]

good idea, that makes sense. thanks