Pics of a 285/40-18 mounted on a 9" rim?

[Tweaked Zed]

First of all, I know it's not recommended, but I was curious to see if anyone has done this with a 285 Nitto and a 9" rim. The Nitto is supposed to have a nice square sidewall, so I was hoping it wouldn't bulge too much on the 9".

My problem is I would like to run a 245/45-18 tire on the front for some tire height, but I'm afraid it won't look right with the same tire height in the back if I run a 275. I know it's only .4-.5 inch difference, but I like a little more height in the back for the aggressive look.

Thanks everybody!

Bryce

[speedjohnston]

If its not recommended by the manufacturer, its not safe. That is if your talking about the tire on that width of rim....

[Tweaked Zed]

Gee thanks. Anybody else?

[Romulus]

perhaps the wrong forum to be asking for pictures of an tire mounted outside the manufacturers recommendations.

There might be better websites out there for checking tire sizes, but I stumbled across this one recently trying to settle on tire sizes for my project.

http://www.rimsntires.com/rt_specs.jsp

[deuce_454]

this a 285/40-18 on a 9.5 inch rim

http://i155.photobucket.com/albums/s295/deuce_454/Billede022.jpg

[JRouche]

this a 285/40-18 on a 9.5 inch rim

http://i155.photobucket.com/albums/s295/deuce_454/Billede022.jpg

That tire doesnt look overly wide at all. It looks good. In that pic they are off the ground right? But I dont think they will compress much beyond the profile shown. Oh, and what are those tires. I was on a site and those type of tires were shown on another car and a guy was asking the same thing. I like the tread pattern. JR

[deuce_454]

Bfg - g-force TA Kdw (new thread pattern) http://www.bfgoodrichtires.com/overview/g-force-t-a-kdw/22.html

looks like they arent making the 285/40 any more though