mini tube and 4 link shop in dallas wanted

[69firebird709]

hello everyone has anyone in the dallas texas area had there car mini tubed and 4 linked. I have a 69 firebird that I need to have mini tubed and a ford 9 inch installed in. Looking for a place that does these and knows what they are doing. My car has a 6lt and 4l80e trans and putting a intercooled supercharger on it. So i'm going to have to tub it so it will hook up. please let me know what experiences you have had with shops in the DFW area.

thanks Tom

[lil427z]

mike minette, jim killer ridez 972 287 4855 , grubs 972 469 3277
advantage autoworks todd or chris 817 788 8660,
hope this helps rick k:thumbsup:

[tmadden]

Call Mike at Parker County Performance. He's solid and honest. Talked to him today at the show.
817-270-4377

[TravisB]

Not in dallas but we can pick it up and drop it off.

www.kdhotrods.com

good luck

[69firebird709]

Thanks for the replys I just found out I know a guy that is working at grubs now. I'm going to give him a call thanks for all the replys I will let you know how it goes.
thanks tom

[69firebird709]

has anyone heard of martzchassis 4 link kit? This is the kit tyler at north texas customs uses.

[dhutton]

has anyone heard of martzchassis 4 link kit? This is the kit tyler at north texas customs uses.

The Martz product line is not used much here and over on pt.com. Did you ask him why he uses it?

Don

[lil427z]

gary martz has been around for 30 +years . they do a good job.:thumbsup: :thumbsup: :thumbsup: .
rick k

[69firebird709]

The Martz product line is not used much here and over on pt.com. Did you ask him why he uses it?

Don

I have not talked with tyler yet I just sold one of my impala's yesterday. So the impala is going to turn into firebird money. I have have seen the DSE setup it looks good and from the pics I saw of the artz setup it looks pretty strong also.

[dhutton]

I have not talked with tyler yet I just sold one of my impala's yesterday. So the impala is going to turn into firebird money. I have have seen the DSE setup it looks good and from the pics I saw of the artz setup it looks pretty strong also.

DSE, AME, Speedtech, BMR and Jake's all offer some great options. The last three are torque arm systems. AME offers three and four link options. Alston also has some four bar options.

Don

[kennyd]

we have a 68 in our shop that has a martz rear under it it looks like a solid part , not sure how it works yet .

[69firebird709]

we have a 68 in our shop that has a martz rear under it it looks like a solid part , not sure how it works yet .

let me know what you think of the martz setup after you have time to play with it.
thanks Tom

[lil427z]

martz chassis set works very well.
rick k:thumbsup: :thumbsup: :thumbsup: