sweatnblood
02-25-2010, 01:01 PM
The only reason I'm selling is because I'm wanting a convertible... otherwise I love this car:hail:
1973 camaro type LT(was green on green)
Hugger orange with white strips
Replaced right full quarter (gm)
Replaced both doors with clean dent free (gm)
New cowl hood( goodmark)
New grill
Tall rear spoiler
Rechromed split front bumpers
Repo rear bumper
New radiator
New condenser
Replaced floor section under rear seat
Engine
Accel DFI Gen 6 with laptop and software
1996 383 Lt 1 fresh rebuilt less then 500 miles
Eagle rotating assy forged
Complete Comp cams roller valvetrain,springs,ti retainers,ect,ect
New roller cam
SRP pistons
New gm heads
Pocket ported and gasket matched
MSD 6AL box, wires, coil
Transmission
6 speed T56 Trans rebuilt
Spec stage 3 clutch
Short shifter
New Ford SVO alum driveshaft
Rear end
10 bolt with welded tubes and straightened
New Eaton posi
4:11 Richmond gears
95 lt1 rear discs
Suspension
Tubular upper control arms
Steel plated lower control arms
Delrin/alum control arm bushings
C5 front brakes
LT1 rear disc
1 ¼ front sway bar
QA1 front coil over’s
QA1 rear shocks
Solid delum suspension bushing
Cal-trac rear bars
New Eaton rear springs (stage 2)
Wheels
Fikse mach 5’s
17*8 front
17*9.5 rear
4 new tires
Interior
Auto meter 5 inch Speedo
Auto meter 5 inch tach
4 -2 inch gauges (fuel, volt, oil, clock)
New rear seat covers
New upper and middle door panels
New dash pad
New headliner
Front seats, they are in nice shape but just need to have a newer or better style seat since they are starting to show there age
Lower door panels have been dyed black and showing some wear
AC evaporator has leak, I replaced all the other stuff and it works but leaks down.
you can email me here or at [email protected] or give me a call for any questions 858-220-2105...asking 22,500$
Tony
1973 camaro type LT(was green on green)
Hugger orange with white strips
Replaced right full quarter (gm)
Replaced both doors with clean dent free (gm)
New cowl hood( goodmark)
New grill
Tall rear spoiler
Rechromed split front bumpers
Repo rear bumper
New radiator
New condenser
Replaced floor section under rear seat
Engine
Accel DFI Gen 6 with laptop and software
1996 383 Lt 1 fresh rebuilt less then 500 miles
Eagle rotating assy forged
Complete Comp cams roller valvetrain,springs,ti retainers,ect,ect
New roller cam
SRP pistons
New gm heads
Pocket ported and gasket matched
MSD 6AL box, wires, coil
Transmission
6 speed T56 Trans rebuilt
Spec stage 3 clutch
Short shifter
New Ford SVO alum driveshaft
Rear end
10 bolt with welded tubes and straightened
New Eaton posi
4:11 Richmond gears
95 lt1 rear discs
Suspension
Tubular upper control arms
Steel plated lower control arms
Delrin/alum control arm bushings
C5 front brakes
LT1 rear disc
1 ¼ front sway bar
QA1 front coil over’s
QA1 rear shocks
Solid delum suspension bushing
Cal-trac rear bars
New Eaton rear springs (stage 2)
Wheels
Fikse mach 5’s
17*8 front
17*9.5 rear
4 new tires
Interior
Auto meter 5 inch Speedo
Auto meter 5 inch tach
4 -2 inch gauges (fuel, volt, oil, clock)
New rear seat covers
New upper and middle door panels
New dash pad
New headliner
Front seats, they are in nice shape but just need to have a newer or better style seat since they are starting to show there age
Lower door panels have been dyed black and showing some wear
AC evaporator has leak, I replaced all the other stuff and it works but leaks down.
you can email me here or at [email protected] or give me a call for any questions 858-220-2105...asking 22,500$
Tony