69 Camaro minitubbed wheel backspacing

[firstgencam]

I have a 69 camaro that I just minitubbed and cut the rear-end down to 54 3/4 from axle flange to axle flange. I want to run a 19X12 wheel on the back a Boze Forged "injected". What is the proper backspacing on this wheel??? My car has DSE minitubs with a leaf spring rear!

[6spdcamaro]

detroit speed recommends 5.5 inch backspacing with that rear. call to confirm

[ProdigyCustoms]

Your pushing it with a 19 X 12. I do not think anyone has done 19 X 12 wheels more then we have. There are a couple cars on our site with that set up.

But as I said, we need to measure a compare notes to be sure to make sure they will fit your car.

Check out Project Emptynest and Project Payback Version 1 on our project page.

Call me and I can share our measurments and compare notes. And I can give you a good deal on the Injected wheels also as we proudly sell Boze wheels.

Here is a set od brushed center, polished groove Injected we just delivered.

http://i169.photobucket.com/albums/u212/ProdigyCustoms/FoolishWheel.jpg

http://i169.photobucket.com/albums/u212/ProdigyCustoms/Foolishwheel2.jpg
I