69 Camaro seat install help Please!

[TChance69]

Trying to put 2000 Pontiac Trans Am seats in a 69 Camaro. Any sugestions?

[hifi875]

use the search 4th gen seats, there are numerous posts on here about this. i have them in my 69 camaro.

[Bow Tie 67]

It involves some cutting and welding.

[130fe]

Front holes line up. For the rears you can cut and reposition them to fit or use some 1/4 plate and make adapter plates (for new and old holes). They are very comfortable.

[RECOVERY ROOM]

Front holes line up. For the rears you can cut and reposition them to fit or use some 1/4 plate and make adapter plates (for new and old holes). They are very comfortable.

Thats a good answer:thumbsup:

[TChance69]

You guys rock! Thanks I will try it.:thumbsup: :thumbsup:

[130fe]

Be sure and use grade 8 hardware also.

[Denvervet]

When I did mine I used 1 & 1/2 angle iron (1/8") for the rear feet. Nice and sturdy and easy to weld to original brackets. I just cut the rear feet off (they are off-set the wrong direction) and placed a block of wood under brackets to then mock up about 2" long angle irons and tacked in place before pulling off to finish welds.

[TChance69]

Thanks sound like all are good ideas!