I need rubber shift boot !!

[Bowtieracing]

I would need rubber shift boot inside lokar leater shift boot to insulate cabin from noice and dust. I have T56 and have made raised the tunnel allready. So minor fabrication is not problem.

What have you used?

[Bowtieracing]

4th gen f-body T56 rubber boots are discontinued by GM. Any other ideas?

As i said it should fit under lokar "leather" boot.

[deuce_454]

what about a hurst rubber boot?

you can cover it with a leather one... or what about a foam rubber seal between the transmission tunnel and the transmission.. and then just a leather boot in the cabin?

[Vegas69]

I just cut my hole for my insulation tight around my trans boot. The leather shifter boot is purely for cosmetics.

[LSXfan]

4th gen f-body T56 rubber boots are discontinued by GM. Any other ideas?

As i said it should fit under lokar "leather" boot.

below is the GM part number for the heavy inner shift boot for a 4th gen F-Body

12542549 $19.51

[Bowtieracing]

below is the GM part number for the heavy inner shift boot for a 4th gen F-Body

12542549 $19.51


This might be it! Thank you LSXfan :cheers:

[Bowtieracing]

Close but no cigar.. GM#12542549 is the rubber cover over shifter tower.The one wich mounts on transmission. Here i pic of the part i am looking for at 2010 camaro. Offcourse that cant be bought..I comes with the shifter cradle assembly :mad:


http://i4.photobucket.com/albums/y145/emalikyltti/DSC06839.jpg

[LSXfan]

oops, I copied the wrong part number. This is it.

10267518

[Bowtieracing]

oops, I copied the wrong part number. This is it.

10267518

Okay,we try again :cheers: