*hotrods*
01-13-2010, 06:37 PM
SBC 406 NOS short block with about 10 passes went 10.34 in 3400lb truck. Scat lighweight 4340 crank, Scat 4340 H Beam Rods, JE NOS Dome pistons with Hellfire Rings. Splayed Billet main caps, balanced and assembled. $2900 REDUCED $2700 FINAL REDUCTION $2500
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/4062.jpg
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/406.jpg
New IN BOX - Passenger side upper tubular Control Arm for S10 made by Speedway Motors. Does not come with screw in balljoint. $40
New Weld Draglites 15X15 5X5 4.5"bs. I used these to roll my truck around while building it only! $300
http://i7.photobucket.com/albums/y290/faith624/Weld1.jpg
http://i7.photobucket.com/albums/y290/faith624/Weld2.jpg
Hydroboost booster and mastercylinder from a 1994 Astro van. These work great on S10's with a little modifications to the mounting bracket. $75
Canton SBC Drag Racing oil pan part#13-080. Gold Iridited 5 qrt crank scraper, windage tray and trap door. Used for half season and it will come with oil pump and pickup if needed. The oil pump is a Milling part#10553 and was used hald a season as well. $125 FINAL REDUCTION $100
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/oilpan1.jpg
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/oilpan2.jpg
SBC ARP Oil Pump Chromemoly Shaft. $10
SBC ARP Fuel Pump Chromemoly Push Rod. $10
I can provide excellent referrences if needed. Shoot me a email at [email protected] ([email protected]) or PM me with your REASONABLE best offers! Feel free to call me at 606-584-4747.
Kevin Turner
Maysville KY
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/4062.jpg
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/406.jpg
New IN BOX - Passenger side upper tubular Control Arm for S10 made by Speedway Motors. Does not come with screw in balljoint. $40
New Weld Draglites 15X15 5X5 4.5"bs. I used these to roll my truck around while building it only! $300
http://i7.photobucket.com/albums/y290/faith624/Weld1.jpg
http://i7.photobucket.com/albums/y290/faith624/Weld2.jpg
Hydroboost booster and mastercylinder from a 1994 Astro van. These work great on S10's with a little modifications to the mounting bracket. $75
Canton SBC Drag Racing oil pan part#13-080. Gold Iridited 5 qrt crank scraper, windage tray and trap door. Used for half season and it will come with oil pump and pickup if needed. The oil pump is a Milling part#10553 and was used hald a season as well. $125 FINAL REDUCTION $100
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/oilpan1.jpg
http://i7.photobucket.com/albums/y290/faith624/406%20Parts/oilpan2.jpg
SBC ARP Oil Pump Chromemoly Shaft. $10
SBC ARP Fuel Pump Chromemoly Push Rod. $10
I can provide excellent referrences if needed. Shoot me a email at [email protected] ([email protected]) or PM me with your REASONABLE best offers! Feel free to call me at 606-584-4747.
Kevin Turner
Maysville KY